Having an issue with feeding from two Rem 700's both in 6.5 Creed. They were perfect before getting pillar bedded. So now they both shoot fantastic, but dont feed worth a dam. They aways pass the hand feeding dummies test, but on the range is ALWAYS a whole other story; must be the recoil that does something.
The only thing I could find was that after they were bedded, the blind magazine box kinda had some vertical play in it. Noticed that when I took the action out of the stock and bolted the bottom metal back up to it to see how it looked assembled. Noticed the action screws were now too long and would interfere with the bolt. I asked myself how could this be? If this is mated perfectly without the stock, how are the screws too long?
Now I see - the assembled (in the stock) rifle is longer (taller) inside the stock than it is without. So then after it was all back together again and with the floor plate open, I could stick my hand in there and slide the mag box up and down about four millimeters. This to me didnt seem right but I was told by someone there was indeed supposed to be that play in there.
While looking at the mag box, spring and follower design, I noticed the blued steel mag box was different than the stainless model I have. And they're both different than the ones you see on Ebay that have the little tab or eye on back of the box, where I think you can screw this box down to the action.
1. This box that can be screwed down to the action; it seems older. Is it? Was this discontinued? What was it for originally?
2. My stainless mag box has what appear to be laser cuts in it, and the folds to act like feed lips are more aggressive (closer) Why did the design change? Or was one meant for the 308 and the other a 6.5 creed? I dont know. Was it just a product improvement/change proposal over the years?

Up for sale is a BG Defense/Type A Rifles M110 clone chambered in 308. Full ambi lower. Adjustable gas block. 18 inch barrel. Two stage trigger from Type A. Factory Ral8000 cerakote. This is a sharp rifle, check it out! $3500, optic not included.

SOLD

Aero Solus SA .478 BF and an Aero Action Wrench

Both are new in the box

$750 shipped

For sale is a Schmidt and Bender PMii 6-36. This has the Grid2 reticle, DT35 turrets, and wrapped with a Dangerfield Arms protective camo wrap. It’s mounted in a 20 MOA spuhr mount. $3200 without the mount, $3650 with the mount. Optic is in great shape, no dings or scratches on it.

MPA Matrix Pro $1050 shipped

Everything works as it should. Not interested in parting it out but may be open to selling without the spigot extension. It's nice to have though.

$550 shipped (Paypal F&F)

Comes with
-bipod that has typical minor scuffs here and there from shooting matches
-rubber and spiked feet
-leg extensions
-AREA 419 spigot
-AREA 419 arca clamp

And since many won’t consider that “main stream “ news here ya go


So has anyone in this country’s political elite ever told the truth on anything, ever?

Them Canuckistanians sure are getting sporty..

Tariffs on flamethrowers, passenger drones and manatee meat!

Whoever is writing their bills is %$#@ing hilarious!!!

Well, I always said Canadian Humor is second only to British Humor.... I mean... Dan Aykroyd? Bob and Doug? John Candy? Anne Murray? The Toronto Blue Jays!!! They crack me up!

Sirhr

PS. Where can I get some Manatee Meat? Ideally tenderloins or backstraps that don't have propellor damage!

Cyke Pod Gen 2 Single Pull - RRS BCT Mount PRS Legs - 106291-BLK - $545 Shipped SOLD PENDING FUNDS



Lightweight Single Pull - Ckye Pod RRS BTC Standard Legs - 106343-BLK - $635 Shipped SOLD

Both are like new, they were taken out of packaging for some photos in my studio but never attached to a gun or taken to the range.

Looking to dip my toes into the bolt gun world after spending all of my time in the AR world. Looking for viable options under $3k that can either be built or turnkeyed from a reputable company.

So far I’ve got the list of turnkey rifles at:
- MPA Matrix Pro PMR
- Aero Solus Competition
- Seekins Havak HIT Pro M3
- Tikka T3X Ace Target

All would be in 6.5 Creedmoor as I’ve got 2 AR10’s already chambered in that round, and good factory ammo is readily available.

I’m currently leaning towards the Seekins because of the quick change barrel option, but I’ve heard there are issues with the HIT taking pre-fits if I ever wanted to change calibers or upgrade barrels.

Are there other options I should be considering? Is it worth looking to assemble a rifle with a $3k budget?

Making a table for the wife lately and Saturday, I did what we are never supposed to do. No gloves on, I was pulling a 6' board through my table saw and I found the blade....

My safety glasses had dust all over them and I just couldn't see the blade that well I guess. my wife was helping catch the boards and watched me do it too and she also said that she didn't think I was that close to it. Yes, I kept working and got all of them ready to join because I'm a man.

Of course this is just one of many accidents. I once caught a metal chuck that came off my lathe with my freaking bear hand (just a reaction to save it from hitting my lathe bed)and had a steel splinter inside my palm for a few days before realizing why it kept hurting so bad. i got it out with a magnet.

Mashed off the end of my left thumb between gears or a flywheel and starter on a log splitter when I was 17, and I've cut myself many times.

So what are the coolest injuries yall have done? Must provide pics or it didn't happen!!!

table and finger for proof

Gen 3, unmolested

Can bundle with a low round count AINA 6.5 CM barrel but rather sell with no barrel.

No can, bipod, scope, mount or Sawtooth rear bag rider.

Comes with all factory accessories and factory box, foams, pen drive ect and one mag.

4,100 shipped (no barrel but can entertain a 6.5/6 fired or unfired barrel offer.)

Can consider a Impact 737r 75 deg bolt as partial payment depending on condition.
Please, no other trade offers.

I been looking to see if anyone would Post this up because it been bugging me ever since I read about it last week. Nobody looks to have so ...

I always considered the idea that the industry was likely seed moneyed-$ Gov./Agency Front brick and mortar Setup ever since the fad started, and always spun my head like the exorcist that millions of people wound freely line-up and just give away the ONLY thing they truly own, thae one thing that takes a Courts Oder to take from you. Giving away their DNA and their complete families DNA linage to be industrial banked. All for just 20 minutes of pop culture amusement in reading the results.

Anyway... Bankruptcy, 23andMe up for Sale with millions of peoples DNA results to be sold off .
DNA industrial Banking

Within minutes of me posting on a thread in the classifieds "PM incoming" he messaged me trying to get me to pay him and he had copied/ stolen the photos from the original posters post

Beware

(4) 500ct Sierra .224 77gr #9377 - $155 shipped each

(15) 100ct Sierra .243 107gr #1570 - $180 shipped/500 SOLD

For sale 320 rounds of real deal MK262. $500 shipped.

The longer you read, the funnier it gets... rapper Young Scooter? Not getting any older? On his birthday? Scooting from police? When he jumps a fence, breaks his leg (while scooting) and dies suddenly?

Betting that if they'd opened the door and turned the stereo down... he'd be alive today!!!

Always thought he did a great version of "At the Hop!"

Login to view embedded media
And if he had learned to hop... he'd also be alive today!

I'll have my irony "To go." Like, out the back door. Doing an impression of Jesse Owens! Who, for the record, was a runner though won gold in the Long Jump. See, if Little had been a pole vaulter or a hurdler... he'd also be alive today.

Login to view embedded media
Like I said... it's just gets funnier...

Sirhr

I bought this here a couple months ago and have decided not to use it for now

Matrix pro 2 - SA R700 ambidextrous in gunmetal gray
Speed nut for LOP adjustment
MEVG
3 NV caps
I also have all of the original parts for the standard stock setup as well as the thumbs thumbshelves and what not
It's used, but is perfectly functional
The spigot is included, but not in the pic

1100 shipped via venmo, zelle or PPFF

Bought this from a member here then changed directions. Had 750 rounds through when I bought and I’ve not shot it. Just spun it on and took pics.

-X-Caliber carbon fiber blank in their lightweight contour 1.070” at the muzzle
-1/8 twist 6R rifling
-20” length
-prefit/chambered by PVA
-22creedmoor

Two boxes of ammo included
-Hornady Precision Hunter 80gr ELDX
-Hornady match 80gr ELD

$600 shipped for barrel and ammo. $550 shipped for just the barrel. PayPal Friends and family, CashApp or Venmo. Private message me with all questions, offers or trades, claim in the thread after we’ve agreed on deal.

Trades:
-16.5” carbon fiber or steel blank or prefit for a TL3 6.5 Grendel, 6arc or 22arc.
-McMillan A5a, A3a or xm3 stock short action 700 footprint
-Atlas BT65 bipod QD
-6cm ammo
-A 700 footprint short action around the same asking price
-May consider a Terminus Zeus QC prefit in 22cm, 6cm, 6.5cm maybe 308
-26” 1:7 22cal blank Heavy, Med Palma or m24 contour
-Maven RS4 5-30
-PRS stuff
-Zermatt TL3 ACTION WRENCH

Schmidt-Bender 3-20x50 PMII Ultra Short FFP
DTII+ Elevation turret MRAD CW (installed 2021), capped windage turret
Police P3L Reticle, Illuminated
"Shark fin" installed on magnification
Tenebraex lense covers

Overall, Very good condition! Sent scope in for removal of debris (internal grease splatter) in 2021 and install of the DTII+ Elevation turret, which also included thorough cleaning and inspection. P3L reticle is excellent for hunting, only center crosshair illuminates. Attached reticle pics are @ 5x and 18x. Elevation turret is CW. 34mm tube no ring marks. Weight of scope is 34.4 ounces. Excellent USA customer service located in Winchester Virginia should it be needed.

$3200 TYD

USPS Money order, Personal check or Paypal F&F Appreciated but by no means required.

USA Sales only!

Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned.

I cant for the life of me figure out why I have so much inconsistency in neck tension with this brass. This is 2 times fired brass in the same chamber (howa), annealead with an AMP, then sized through a forster full length sizer with 262 ball. All necks brushed with graphite and bodies lubed with die wax before sizing. I see the inconsistency with my mandrel checker, and in the arm of the arbor press while seating. What is changing so much that I cant see, that is affecting this neck tension?

Stiller Tac 30 AW action with a 26” hawk hill comp contour barrel. Has around 800-900 rounds on it. Asking $1600 obo. Shipped to your ffl. Can do ffl to ffl but you will have to pay any associated fees.

I ordered a Vanquish the first week of Feb 2025. In the past, I received the build sheet within a couple of weeks of placing the order. For this order - nothing yet. I asked about the build sheet in Late Feb, and was told:
"You will receive it by the end of the week at the latest. (( OP:End of the week would have been Feb))
We have had some key members out sick this month and are a bit behind. Your order date will stay the same so this has not delayed the process time I promise".
Nothing yet. I'm still inclined to believe the "Your order date will stay the same". Just wondering. Every now and then one will pop up for sale. I'm wondering if I should just cancel the order, buy used. At the end of the day, I'm not sweating either way. Just curious.

Missed the return window and it’s just a little bigger than I’ll actually need. SOLD TYD. No trades at this time. Color is gray but it does have kind of a green hue to, not super dark wolf gray like some companies