Looking to see if anyone has any experience in this. Potentially new house for me and the family in desirable location. Kids would have a lot of school friends very close by (unlike our current home).

Current house is 4100 sq feet as is new one. Lateral move. Difference is I can pull about 550-600k in equity out of this to make it affordable.

My question is how low is too low of an offer? I know the lender has final say so. House appears to need exterior cosmetic love, minor cosmetic upgrades plus all bathrooms renovated in most recent pics we can find from 2020.

Owner borrowed 665 for the house (public record). Hard to fathom he’s into it for more than it’s worth on regular market.

Any insight is greatly appreciated

Selling a Nightforce ATACR 7-35x56 F1 with a Mil-XT reticle.


It will come with all original packaging, sunshade, scope caps, windage beauty ring, aadmount objective cap.

Mount not included.

The glass is in great condition no scratches.

Let me know if you have any questions.



SOLD

I finally broke down and picked up one of these. So far, it's shooting well and I'm not regretting it...I'm not retiring any of my other rimfires, but I am happy with the way it's performing.

I do need to add a few items to the chassis to help when shooting comps.

For anyone who has one, are you using a thumb shelf? If so, which one?

Also, I've debated picking up the AI Bridge, but I would love some firsthand experience from anyone using one.

The last item I am trying to decide on is a rear bag rider. Is there a preferred model, or should one be used that is made for any other AI?

Thanks in advance!

The rifle was purchased as a complete build from Kidd.

Original Kidd Supergrade where the barrel is threaded into the receiver. This is not a slip fit or the current style Supergrade....the barrel is threaded into the receiver.

20" heavy match bead blasted barrel. The barrel is not threaded. McMillian A5-22 stock, inlet with the Kidd tang, bedded to this action. Single stage trigger.

Very light use. Some light handling marks from the safe on the top of the barrel....I can't get them to show up in a picture. Otherwise, like new condition.

FFL to FFL unless you are local to SW MI with a CPL. Zelle or Venmo preferred.

Sold

SIG 2025 translation: Self inflicted gunshot.

Put together a Aero Solus with a criterion 223 1:7 twist match chamber for a plinker.

Thought I had procured a 223 aics mag during MDT Black Friday sale but can’t find it anywhere.

Which AICS mag is reliable and accommodates long bullets?

Will be used in a KRG Bravo to start with.

Some time back I bought a Monstrum / Amazon mount to try, proof of concept kind of thing. Better to spend $30 to find out it doesn't work than $200.





When I got it I was actually surprised with the quality. Moderately okay? At least the machining anyway. The screws on the other hand are crap and sort of roughly the right size for the tapped holes. I'm using it in a non traditional way on a rifle with decent recoil, so I have no faith in it holding up. I need zero MOA because I'm actually using it backwards, to set the scope rearward.

So I'm wondering if there's anything out of of GOOD quality, that's equally as low. Anyone know of anything off hand?

I just bought a 2021 charger and to say they get stolen a lot is an understatement. Does anyone have any first hand experience with "car alarms" for newer cars?

Do they all come with GPS modules now? Does that mean a subscription for service??

Thanks

Cleaning off the bench. Post what you want and then PM me or just PM directly so no scammers try to reach out to you.

1) magpul str stock mil spec - $50 shipped
2) vltor emod mil apex - $90 shipped
3) Spuhr SP-5002 35mm 1.5” - $310 shipped - SPF
4) tacticon flip to the side mag - $50 shipped
5) sig Romeo 5. No box, low mount only - $75 shipped
6) ARMS 34mm 1.5” QD rings - $150 shipped
7) discoveryopt 34mm 1.25” rings - $30 shipped
8) MDT 34mm rings 1” height - $100 shipped
9) badger condition 1 FDE 30mm unimount. I can remove the paint if desired. 20MOA - $210 shipped
10) AAC brakeout 51T 5/8x24 30 cal NIB - $90 shipped
11) 419 hellfire 2 port 5/8x24 6mm brake. Lightly used - $100 shipped - SPF
12) APA micro bastard 1/2x28 - $110 shipped
13) dead air keymo 1/2x28 - $55 shipped

If you can let me know what the other muzzle device is I will get a price on it.

Found out today my dad who is 72 is going to have his shoulder replaced. I know he has had surgery on both already. He is bad about doing the PT after. Any advice for him or me? He has 6 grandkids hopefully being able to do stuff with them will be motivation to do the PT. I can always yell at him. @powdahound76 can come do some KS deer hunting and yell at him too.

SOLD!!


Lightly used RRS Anvil-30 on an Outdoorsmans GEN2 carbon tripod center post. Excellent condition, just tiny wear on the jaws.

$350 shipped. I can take Paypal or Zelle.

A buddy was in Gulf war one and is now in law enforcement.

He has flashbacks whenever someone says "thank you for your service"

He says he always thinks about rubbing one out in a porta potty in Kuwait to a very used and abused magazine when he hears the phrase.


What runs through your mind?

Good afternoon folks,

I know a bunch of you have super nice cars.

What are you using for "wax"?
Are the ceramic coatings worth the money?
Is there a ceramic product folks would suggest?

I will post pics of the car when it gets here. Fwiw, it's maroon, so a darker color.

I put this together around the start of the pandemic lockdown a few years back, and I am ashamed to admit it's only had ~1000rds through it (as that's around the same time I got deep into bolt-guns). This deserves a better home and belongs with someone who'll really use it. This beast is a blast and runs like a watch.

CZ Shadow 2 OR 9x19

Full Cajun Gun Works race trigger (it has everything except for the shortened DA reach, which I didn't need/want). Its trigger is a thing of beauty with a smooth ~5lb DA stroke like a nice revolver and a 1911-like crisp ~2lb SA that's as nice or nicer than any other Shadow variant I've ever handled (and I've handled more than a few nice ones). Short-reset disconnector for super-short trigger-reset and very little take-up in SA (ala 1911).

Brass LOK grips factory cerakoted black.

13lb hammer spring and extended firing pin installed (with other hammer spring weights included), 11lb recoil spring installed (13lb factory also).

Has the "thick" CZ-97-style trigger installed (same as the old 85 Combat trigger without the overtravel screw that always moves and messes you up at the worst time).

Dawson partridge-style plain-black iron sight up front, useful without ever being distracting (new Dawson FO sight included also).

12 mags. Grams springs/followers in the extended mags for reliable 23+1 in the 6 factory nickel mags with Taran Tactical basepads. 6 factory/Mec-Gar mags with Patriot Defence basepads.

Trijicon SRO 5.0 MOA dot.

Shooters Connection competition inner/outer belt with Ben Stoeger BOSS drop and Comp-Tac holster, 5 CR Speed universal/configurable mag holders. The outer belt is size XL and the inner belt is a huge 50 that can be cut down easily (I know I have a smaller ~36 one too somewhere that I'll look for).

All stock parts (minus the standard/stock firing pin, which I misplaced somehow). All misc holster and mag holder hardware.

Spare OEM slide-stop and spare TRS included (it’s recommended to change these out at ~12k rounds, consider it your first change of tires on the house). CHPW plate installed, hard to track down OEM CZ-UB steel SRO/RMR plate included just in case.

IDK how much I have into this, but I know it's a hell of a lot more than I'm asking... so no haggling, thanks.

Be sure your FFL can receive from private party(s), as this has to ship to an FFL. Out-of-state buyers still have to have a private transfer done.

FTF is available in TN in the Nashville area (TN HCP preferred).
xxxx shipped CONUS, firm. Payment via Zelle. DM any questions. No trades (but if you have a Gibson Les Paul Custom in very good condition, we can talk lol). I’m not splitting this stuff up at this point, I want to sell the whole kit as-is thanks.

Bartlein 5R 3B .22GT Barrel, 7” twist, fitted to my Zermatt Origin action, so should fit any Origin. 19 3/8”, threaded 5/8x24. Has thread protector. I don’t keep track of the round count, but still shoots pretty good. $200 shipped.



Forster .22 GT dies. Two FL sizers, one honed by Forster to .249” neck, and the other factory specs. Forster Micrometer seater. $100 shipped.



Custom .22GT Lee Collet Die set. Used once. Works very well. $100 shipped.



RCBS Matchmaster 6GT die set. Works well for .22GT too. Has both .224 decapper/expander and 6mm decapper/expander. $75 shipped. SOLD.

200 rds Alpha Munitions .22GT brass. 165 of them sized and primed with CCI 450s, the other 35 fired. I don’t keep track of the number of firings, but did anneal prior to every sizing, and the brass is in good shape. $100 shipped. SOLD.

MDT acc for rem 700sa, not sure on the exact model, maybe Gen 1? Good condition only flaws are a few small scratches on the arca rail. Comes with full set of internal weights, two external, rear weight, grip and mirage shield

Only trades I would be interested in would be a mk4hd 6-24.

Also not looking to split up weights, please don't ask.

$950 shipped

Switched out the forend on my AAC MPW SBR so I have the original cerakoted black 8” Knight’s Armament URX 3.1 up for sale. Includes the barrel nut. Pretty sure I have the hand stop panel as well as the rest of the panel kit. Will confirm. $200 shipped.

350 rounds through it

1x20 round mag

Bcm grip

$5900 shipped

Additional unfired bolt and firing pin $600

Or

$6400 shipped for all

NO trades

I knew a sequel would eventually come out. I hope it stands on its own as well as the first one did.

Login to view embedded media

I sent in a set of SIG 10K Gen 1 bino's because the DOF wouldn't send to my Kestrel.

Well I got a package back this morning and instead of repairing mine they sent me a brand new set of 10K Gen 2's

I'm super pumped about the free upgrade and would like to say thanks for the great service.

L3i cz 457 barrel new
24” never fired
Barrel shims
Wasp chamber
No wait time 14 weeks right now
PayPal friends

Going to Rome with the wife in a few weeks. This will be our first time in Europe and I hear horror stories about stolen passports and wallets.

Obviously situational awareness is the number 1 defense to this, but I was hoping for some advice on a decent bag whether hidden or slash proof crossbody or messenger bag, or whatever that is better than others. Bonus points if it doesn’t look stupid and more bonus points if it’s something I can actually use again after the trip.

Thanks in advance!

Custom made ammo boxes .
I have some curly maple
An be laser etched with your name/ caliber or logo if you have a suitable file. $125 shipped to lower 48.
These hold 50 rounds. Neeed your cartridge type and overall length.
Allow 3 weeks for delivery
Check or money order