Have a used bog deathgrip infinite tripod for sale. All works well, just upgraded and no longer need this one. 180.00180 shipped.

Anybody have any idea what it is?

Almost looks like the mount and RDS housing were one piece.

Hello-
Looking to see what AICS mags someone has had luck with for a 30 Nosler? Hoping there is a 5 round opttion? Thank you!

Just as title says I have a custom 6creed with a mullerwrks barrel it’s a 20inch 10twist .130 freebore threaded 5/8x24 for lighter bullets. I built it to coyote hunt with and I shot 87vmaxs through it. There is 127 rounds on the barrel so just got broke in and it will absolutely shoot them threw one hole the action is a defiance tenacity black nitride with integrated recoil lug one of the good ones it has a Jewell trigger in the pic I had a trigger tech diamond in it an changed it and it is setting in a bergara b14 hmr stock with a good bottom metal for mag feed. This gun is a shooter and will make someone a great varmint rifle no matter what the varmint is you can pm me here for more info thanks in advance. There is not a mark on this gun and it will absolutely shoot.
I want 1500 plus fees thanks in advance
Ps: the rifle will b shipped from me to your ffl unless you wanna pay for a ffl near me to ship it for your ffl

For those unaware of what an XP-100 is, here's a pic. Ignore the red adapter. That was placed on there to allow me to try out my Lahar 30 on it. (Which actually suppressed very well)
This one is in 223. Barrel is 14.5" and less than a #2 contour.



I'm looking for something short, light and possibly still usable on an AR once in a while.

What I don't want to do is spend $1k or more on it.

Any suggestions on something that would fit my use case?


ETA: maybe I'm narrowing my search to much, asking for a 224 can???

WTB left handed MDT HNT 26 folder r700 SA

Custom built 7mm PRC Built by Rio Precision Gunworks
Caliber : 7mm

Action : Zermatt Origin SA 20 MOA Rail

Bolt Knob : Factory Sprial Extended

Barrel : Proof 20" Carbon

Twist : 1:8

Contour : Carbon Competition

Length : 20"

Muzzle Threading : 5/8x24

Muzzle Brake : TBAC

Stock : Manners Long Range Hunter Elite Tac

Bottom Metal : RPG M5 LA

Magazine : Accurate-Mag LA 5rd

Trigger : Trigger Tech Special Curved Clean Trigger



Gun is a tack driver just don't have the time to shoot it. Has 60 rounds down the barrel. Likes the 175g Hornady's.

$3900 for the gun without the scope
$1600 additional for scope included

For sale is a used but not abused Gen 1 ACC Premier. Has the short stock (12.5”-13.75” LOP), a new Premier Vertical Grip, MDT Aluminum bag rider, and full rubber dampener/“jellies” kit. It was painted and then stripped so there are tiny remnants in hard to see nooks and crannies.

$SOLD TYD via Venmo/PayPal. Ships UPS with tracking.

Looking for. Please call or text 616.291.2899

So I’m venturing into the foray of red dots on handguns.

Picked up an XD-M Elite in 10mm with the OSP plate.

Decided on the Holosun 509T.

Ordered “Plate 3” from Springfield and it arrived in three days.

When I called Springfield (they’ll send you one plate for free) to place the order I was told 6-8 weeks.

Well, I have two new toys in my possession and I’m not about to wait that long. So, I placed an order for one also.

That one showed up today. (Three days door to door. Well worth the $35 to not have to wait up to two months.

I went to put the plate on, and something didn’t look right.
I double checked my order with Springfield. Yep, plate three. Viewed the plate online, yep, looks the same.

Little did I realize, I need to mount the plate that came with the Holosun, to the plate that I ordered from Springfield. (And file the screws to mount the Holosun down because the Springfield plate is so thin the screws would bottom out on the top of the slide.)

Now, I was under the impression that when I ordered the plate from Springfield, it would be dovetailed to fit the Holosun.
Well, that would be too easy.

Cowitness? Not today. The 509 has probably better than 1/4” between the base of it and the top of the slide.

Rant over.
Anyone know where I can get one plate that both screws to the slide of the XD-M and is dovetailed to mount the Holosun?

Staccato XC with approximately 400 rounds through. It includes the following:

Red Dirt/DSC #2 flat trigger

Gen 1 STI grip stippled by McMullen Stippleworks

TTI Carry Magwell

Dawson extended mag release

DPO Holosun plate installed

Holosun 507 Comp Red installed

(2) 17rd Staccato Mags

(1) 21rd Staccato Mags

(3) 21rd Prodigy Magazines

Safariland 6354-RDSO X300 with QLS fork

Want 4000 shipped and insured have a great day! I am in South Carolina and meet for local drop off with in reasonable distance

WTS:

Zermatt origin action
Vision chassis
Proof 6gt comp contour prefit
Timney hit trigger
Vision Vulcan brake

Has 160 rounds in it exactly, rattle canned but originally black. Just looking to make more room in the safe.

Asking 2750 for the rifle.

Text nine 13 nine 61 three 520

It’s been two years since I posted “I don’t see the allure of 6mm ARC”. I see the allure now. My collection is rather small but everything has a specific purpose (other than my 16” carbine gas Colt LE6920 with the MIL/LE restricted markings). I’m not really a fan, but can’t part with it or change it. I want to build another AR and I don’t have anything that is semi automatic AND ACCURATE past 1k yards. I’ve got a 16” 308 barrel for my SCAR 17, but it stays in the 13” configuration. My 14.5” piston AR definitely isn’t coming close to 1k. My MRAD especially in 338 is certainly capable, but a low recoiling AR would be so much fun. I know nothing about the caliber or who makes the best parts. So far I was thinking
Final build:
San Tan tactical receiver set
Geissele 15” MK4 rail
Craddock 18” RTR 6.5 Grendel barrel
Superlative Arms piston kit
POF roller cam pin
Geissele SDE 2 stage trigger
Magpul ACS with BCM MK2 buffer
JP enterprises rifle length spring
Fortis K2 endplate
Radian Raptor SD charging handle
Radian Talon safety
NightForce NX8 2.5-20 in an ADM mount
HUXWRX flash hider
Atlas V8 bipod
I was going to use a HUXWRW flash hider and use my Flow Ti 762 and maybe get the Flow 6mm if I end up really liking it and want to keep a can on it.
It looks like Duramag are the preferred mags? My main concern is that it has to be 100% reliable.. are the mags there yet? I’m not too concerned with weight since it will absolutely be lighter than my MRAD. I get a pretty nice discount on ADM and NightForce products as well as Proof.. so it seem like going with them was a no brainer. The entire setup will run about $4350. Id also REALLY like to find a refurbished PVS30 to use on a couple of these. Anyone see any glaring problems? Suggestions? Could I go 18” barrel and a 15” handgaurd and be good to 1k?

Gents, I have been scouring the forum for info and I'm stuck in a feedback loop in my head. I want to put together a precision gas gun in .308 (because I have access to the ammo). This would be for range use, primarily, but I like to build duty-quality/reliability rifles. I had settled on Seekins builder sets for receivers/forearm because you minimize/eliminate the pressure on the barrel nut when you run the rifle on a bipod. I've discovered that they are very hard to find and expensive as hell when you do find them. My questions are these:

If not Seekins, whose upper/forearm combo is best for elimination of the input into the barrel when using a bipod? I love the direct forearm-receiver attachment but Seekins, Mega/ZEV, etc don't seem to be obtainable any more. I wish Larue had a large-frame builders set.

Am I going to spend as much money building one of these as I am buying something outright from JP (highly recommended) or an SP10 from Seekins?

I've been following @Bigjake83's posts regarding small frame precision rifle building and have used his formula to put a dandy small frame recce rifle together. I'd like to try it with a large frame.

Any input? Am I just spinning my wheels?

Thanks for your time.

Looking for a little help developing accuracy loads for my JP precision LRP-07 in 6.5 creedmoor. It shoots just about everything well I just haven’t found that magical load yet. Trying to find it without destroying to much brass. If you don’t want to publicly post your load PM me.
Thanks, Nick.

I have 1 like new. Only used for testing
Recoil X brake. Works on any suppressor using the dead air end cap threading.
Diligent Defense etc.

$160 shipped
PayPal FF or Venmo

I have a Like New

Thunder Beast CB Series .30 Cal Muzzle Brake 5/8x24​

$80 Shipped

6.5 PRC barreled action built by Pierce Engineering. This package includes Proof Research 20" barrel (approximately 600 rounds fired) This Action is extremely accurate and shoots sub-MOA or better. Custom built in October 2024. Non-timed Thunderbeast muzzle-brake BA included as well. Badger Ordnance Mini Tactical Bolt Knob. Brand New Vision Pro Chassis with folding stock and top rail. weights installed in the stock.

The action weighs 15.5 ounces. Without the trigger, the rifle action plus barrel weighs 3 pounds and 11 ounces. The total weight of the rifle without the scope is 6.84 pounds. Additionally, the weights added to the stock and top forend rail can be removed to further lighten the chassis.

**Still Available for Sale:**


- **Rifle chassis and BA**: $3,580 (without trigger). With the single-stage, flat-faced diamond trigger, the price is $3,780. The rifle comes in a black plastic rifle case and will be bubble-wrapped inside for protection. The bolt will be removed and wrapped separately.


- **600 Rounds of 6.5 PRC 147 gr ELD® Match Ammunition**: $1,280 (shipped) in six new MTM CASE-GARD plastic holders.


In addition, there are next to new Accurate magazines in 6.5 PRC:
- Two extended 7-round magazines: $85
- Two 7-round magazines: $65
- Two 3-round magazines: $55


Please note, shipping will not be available until June, but feel free to reserve any of these items prior to that date.

I bought this rifle new and have shot it less than 40 times. One trip to the range is all I ever used it. There is a small scratch on the barrel from banging around in the safe. $900 shipped to your FFL

So I wanted to build a clone of the M40 USMC sniper rifle for the vintage CMP sniper matches and multi purpose role and have been researching it on here and various forums and have learned a whole lot in a short amount of time. After seeing some reviews here of other members using EBay user Beever156 M40 stock; I ordered one for myself and from the previous users of this stock; I knew I had to modify the forend to match the contour to make it look as orginal as possible. Thanks to @USMCSGT0331 info on the stock and pretty much entire build spec, I was able to make comparisons. These are my measurements (mind you human error/accuracy of calipers/measurements at the exact right point) compared to the real deal. Not sure if this helps anyone but I’d figure I’d post it. There are some measurements I left out because I couldn’t get a exact point on measure on my stock.

Now to begin the sanding phase of the build.

Link to builder guide to the M40:

A. Length from the front of the recoil lug to the tip of the forend
Orginal average-10.080 Beever156-10 3/4

H. Width of the stock at the tip of the forend (right before it starts to taper off)
OA-1.369. B156-1.514

I. Width of the stock at the front sling swivel
OA-1.512 B156-1.641

J. Width of the stock midway on the forend (4 inches from the front of the recoil lug)
OA-1.727 B156-1.721

K. Width of the stock at the front of the recoil lug
OA-1.851 B156-1.780

L. Width of the barrel channel at the tip of the forend (right before it starts to taper off)
OA-0.974 B156-0.975

M. Width of the barrel channel at the front sling swivel
OA-0.985 B156-0.985

N. Width of the barrel channel midway on the forend (4 inches from the front of the recoil lug)
OA-1.011 B156-0.999

O. Width of the barrel channel at the front of the recoil lug
OA-1.336 B156-1.293

X. Height of butt
OA-5.076 B156-5.070

Y. Width of butt
OA-1.630 B156-1.633

OAL – Stock overall length (without buttplate)
OA-30.0 B156-30 1/4

Yes this 2 years ago but it just popped up for some reason.

Login to view embedded media

Selling my Preferred barrel blank 6 Creedmoor Barrel 24 inch with less than 200 rounds fired through it.

Comes with silencer co ASR muzzle brake.

Asking $400

Or maybe its me

OK
RimX action
Spuhr mount with level (lol)
Razor 6x36 G3
MDT send it
Light in objective
Plumb line and shadow on wall

I leveled Spuhr mount with its bubble. Then flashlight in objective to plumb line shadow on wall. Nothing else levels out.
Put level on scope, mount, or gun everything is canted. I am going with plumb line and gravity.

I do some fine tuning trying to get scope, mount or gun level with bubble and MDT send it stays solid green saying its good () the whole time even as plumb line shadow shows me how crooked the scope is.

I have 2 stocks for sale, both for Rem 700 SA.

1st is a Manners CS with mini chassis with Badger NV bridge installed for the short LPVO scopes and thermal clipons. Works great with the iRay and POT Vudoo S. Selling because I don't use it and enjoy the lighter XLR Mag chassis with NV bridges.

The top of the rail is in line with the scope rail of my TL3 so no height offset unlike my other chassis with bridges

$1200 shipped and insured.


Guns not included, just the stock/chassis. Pictures are to show them installed and can provide any other pictures you want.

Thanks

So I've got a Sandman S already and when I put it on my 12.5, it starts feeling more and more like my 14.5.

My thought is to either buy a 556 specific can (Dead Air is supposed to have one at some point) or get a K can.

Has anyone done a direct thread K can on an 11.5 or 12.5 and regretted it? I shoot with earpro 99% of the time but I don't like a fireball at night. Thoughts?