Here at Cameo, Ultimate Hunter Challenge, I sponsored the Shitters

Selling a Busse combat grade NMSFNO Garth edition. This was a limited run done in 2014. Excellent/like new condition with just a couple very small imperfections. Has never been used or cut anything. This model is extremely rare and highly sought after by collectors.

$800 shipped. Payment via Zelle or Venmo.

Will trade for 44 mag ammo. Either Hornady 240gr XTP or quality brass cased 240gr range/target ammo.

Selling a Hawkins Tank Brake ST 7mm. Works on anything 7mm or less obviously. It’s in like new condition, rode on my Seekins Element 7PRC for about 100 rounds and I sold the rifle and buyer didn’t want the brake.

These brakes are awesome, they have excellent recoil reduction but aren’t concussive to the shooter at all. It’ll still blast the fuck out of the guy next to you though.

$125 $110 shipped. Zelle or Venmo.

Ones fired cleaned and sized
Comes with mom ammo box
$75 shipped

What one is the go to ?

Dark distressed
Cut for M5 Bottom Metal
Inlet for Impact 737 SA
360 Precision Steel Arca Rail

No BM included or interior weights

Has some wear from matches. Has some grip tape for finger placement.
Some scuffs in the interior from removing the weights that were in it, cannot see them with your action installed.
Been a great stock for me, moving up to the Samson Stocks.

$950 shipped with steel Arca rail
$850 shipped without Arca rail
PayPal FF or Venmo

Might be willing to trade for Manners Pro Hunter or LRH with mini chassis.

Have several of these guys from M18 that i've since sold. This one is FDE with the BUIS in the dovetail slot. Used on my carry gun for ~3yrs.
Works fine. Have box and books. May not have mounting screws.

$250- shipped

SOLD

I am selling my black Foundation MG2 only b/c I have a Samson for that rifle now.

It's in good shape and includes OTM M5 bottom metal w/flare mag well and ARCA rail.
It's got velcro on the right for a SAP two round holder and some non-slip rubber on the buttstock for tripod rear support use (doesn't slide as much etc)

pp/ven 1200 shipped

Brand new. Bergara Premier Action. SA 308 bolt face. $750 shipped to your FFL

Tim Walz claimed that his “ masculinity” intimidates MAGA during a podcast with Gavin Newscum.

Former WWE wrestler and current Tennessee mayor Cain challenged Timmy to a wrestling match.


I would love to see Timmy get wrecked & humiliated by Cain, or anyone else for that matter

Scumbag Dems!

Login to view embedded media

Krg bravo short action rem 700

Painted in rattle can by me. Includes all original spacers, parts, hook cover, etc. Has qd sockets installed. May ship disassembled for shipping efficiency.

Asking $325 shipped

I won a contest where the winner gets a Blueprinted Remington 700 in Short Action caliber of choice, with a Kreiger or Bartlein Barrel, Bedded in a MDT XRS Chassis (or equivalent pricepoint)… or…$1500 cash.

I could have him build me a gun that I’d be happy with for life… Or I could take the money, buy a tikka, Bergara etc, put it in a decent stock/chassis and still have money for a bunch of ammo

We discussed 243, 6arc and 6gt for the most part. If I go with 6arc or 6gt, he would do load testing and give me the data. I’m a factory ammo shooter but I would have friends load the oddballs for me. We Briefly discussed 220swift and 224Valk as well.

This will be a pure coyote hunting gun and max distance of 300 yards. All tripod shooting. I don’t like to blow big holes in the animal either, I keep the nice pelts. I’m a bit torn on what to do, and would appreciate input.

Too many lying around. Buy it before it turns into a rifle.

Exc condition lrh with mini chassis for m5 Bottom metal.

Used in excellent shape. Has biood stud, qd sockets. Some fretting around the biood stud from Harris.

Neoprene pad in cheek piece will come right off.

1075 SHIPPED.

Since I am starting my longer range shooting adventure, I decided it was time to qualify for the 600yd range at the club I am a member at. It has 10" round steel at 150yds and 250yds. 12" round steel at 350yds, 450yds, and 550yds. At 600yds it there is a 18"x24" steel rectangle and various round steel. At the back of the range, 655yds - 660yds, there is a variety of steel target.

Went back out today to enjoy my new privilege...lol. I REALLY enjoyed it and am very glad to have access to it. Since I was the only one out there I decided to run my drone down the range (yes, I made sure they were cool with it) to send to some buddies. Thought I would share it here.

I am sure many here have access to better, but I think this is a pretty cool setup. Wish it went out to 1k...lol

Login to view embedded media

All prices include shipping. Unless requested otherwise, Ill ship USPS Priority. I can accept Venmo and PP FF. If these dont work for you, we can dicsuss options.

Warhorse Comanche (standard fill) Ranger Green: $100 SOLD
Few years of use, only a few matches, still in very good shape, no frays or tears.

Warhorse Traveler (standard fill) Ranger Green: $30
Same as the Comanche.


Precision Underground Recon Mini (lightweight fill) Tigerstripe: $75
Only used it for about year as my primary bag for "deployments" (weekly use on the range).

Wiebad Berry Bag Multicam: $30
About 4 years of ownership, weekly use on the range up until I got the Recon Mini. Still in good shape, the loop is starting to become fuzzy.

Redtac Halfpint Ranger Green: $15 SPF
Used it a few times, still in good shape.



Hill People Gear Original Kit Bag: $75 SOLD
Owned for 5 years, used it for backcountry hikes, (about 200 miles). Still in very good shape.



Triad Tactical Leupold Mk4 12-40 Spotting Scope Cover Black $50
Second owner, still in very good shape, just a little dusty from the last match I used it in.

RRS Leupold Spotter Plate: $40
Second owner, very little wear on the mounting surfaces.

Bought some stuff off a guy that needed money, now passing it along.

Not real sure what these are worth. It’s in great shape, one little rub mark on the bottom of the objective bell.

$OLD

I built my dad a 243 AR out and he had some issues firing it today. He’s running an adjustable gas block. During firing some of his round were not ejecting and staying in the chamber and then trying to double load the next round. The problem is he lives very far so I’m unable to troubleshot it. I thought maybe he needed to open his gas block more but with the rounds not extracting at all it sounds more like an extractor problem? Some guesses would be greatly appreciated

Bought with an AXMC on here not long ago.
Won’t be using 308 anytime soon.
Not 100% sure on round count, but it is low. I’ve not shot it. Perfect shape.

$525 shipped.

PP F&F. Pm me or text me 815-878-8255

Ive had my CDG since pretty much day one. I really like the straight handle. However, it seems that a swept handle would be a little bit more ergonomic. I took the liberty to reverse engineer the OE and design a swept/bent version. I'm looking into having these 3D printed out of 17-4 Stainless. Here is a quick rendering of the part.

Going to try to gauge interest off of this post to see if its worth it to make.

Thank you for your time.
May God Bless you.
-Austin

sold

Must be 190grainers.

Will only work with established members here. Will request Facetime walk through, scammers get fukt.

Meme for your time.

Less than a year old and shot one hog with it. Awesome scope

$600 Shipped or best offer

No box because I wasn't expecting to sell it

What a fun interview this was!

Login to view embedded media

Selling my mint Beretta 694 12ga O/U. Comes with 20 gauge Briley tubes. These allow you to shot both 12 and 20 gauge out of the same shotgun. Really makes this a versatile setup.
Barrel length is 32”. Right handed

Bought this and fired 120 12 gauge rounds and 80 20gauge rounds using the Briley tubes. 200 rounds total. Practically brand new.

The wood grain on this shotgun is A+++++

Comes with hardcase and original accessories.

$4000 shipped

This is an excellent price as the Briley tubes were $400 alone.