Character supreme less than a year old. $330 shipped

MDT grip made by 5x5 precision. New not used. Installed and wasn’t for me. $50 shipped

Will the 20 MOA 1.375” Uni-Mount with a 2.5-20x50 NX8 clear the rail of an AR?

I’m actually running a JP handguard without a rail on top on this rifle so I assume it would but you never know.

If I move it to a rifle with a full rail will it still fit.

Would the 1.125” fit this rifle? I assume the 1.125” will not clear a traditional handguard and rail?

Pay no attention to the cheap Brownells Mount. It was free. Just acting as a stand in

I am in need of an Origin .308 Bolt Head. If anyone has one they’d like to get rid of please PM me your price. Thanks… Will only deal with established members. Thanks again…

Login to view embedded media
Stumbled across this doing some digging into the federal investigation into the DUI for profit arrests happening specifically in Florida, but in several states right now .

Asshole local cop - one of the ones being investigated- pulls over an undercover FBI agent who’s driving like an asshole .

Florida cop comes on heavy - makes drug dealing and drunk driving accusations and places fed in handcuffs for carrying a gun- which is completely legal in FL.
Finds feds credentials and accuses him of impersonating a federal agent .
Refuses to call his supervisor as fed requests .
A failure to signal traffic stop goes to accusations to drunk driving and drug dealing to handcuffs in less than one minute.
Gotta love it when assholes collide

$825 TYD

I have for sale every part to build a Secret Service “JAR” clone.

Remington 700 long action

Remington M24 trigger

Remington BDL bottom metal w/box, spring and follower.

Badger Ordnance Steel 20 moa scope base

Hart SS 7mm 1-9 twist MTU contour barrel

McMillan A5 stock as ordered by the secret Service.

Leupold 3.5-14 MK4 with Badger rings and SIMRAD cap

All pins, springs, and screws.


The action has yet to be blueprinted and obviously the barrel is new.

I am switching gears and getting out of the clone game. This is my last one. It’s taken me several years to acquire all the right parts. The early SS JAR rifles were but in 7mm REM Mag in case you are wondering why the 7mm barrel.

I am asking $2450.00 shipped for the kit.

Venmo or USPS money order only.

Pm me with any questions

Thanks

For sale is new never used Die Set from L.E Wilson

Dies include:
- Case Gauge
- Bushing Neck die
- Stainless Steel Micrometer Top Inline Seater Die
- Bushing Type Length Size Sizing Die

MSRP on these is $350

Asking $275 Shipped OBO

To get impacts beyond 600 yards, I’m having to change my bc from .292 to .280 AND change MV from a twice verified (two garmins running side by side) 2770 to 2750. On the Hornady app, this equates to 2750 and a AFF of 1.10. If I don’t change the muzzle velocity, there is no allowable AFF large enough to give me true results. To clarify, if I put in the largest allowable AFF and start lowering MV, 2750 is the first speed at which the calculated dope matches reality after conventional rounding. The curve predicted by AB matches at .280/2750. If I put the verified MV (2770) in to AB, i have to go to a BC of .272 to get hits.

This is verified at both 1800 ft and 70* and 7000 ft and 40* on small enough targets that I’m confident it’s not just bad shooting/spotting.

Berger 109 LRHT, 7.5 twist. 1000 rounds on the barrel/brake combo. 30 rounds over the garmin shows an SD of 8 and an ES of 34 and the barrel shot two back to back cloverleaf groups (sub 1/2”).

Anyone have any ideas why I’m seeing such incredible inefficiency downrange. Something about the bullets? A barrel problem causing a change to external ballistics? I’ve never seen such a huge truing solution required.

Bkings billet receiver set
Ballistic advantage 18in heavy barrel 308win rifle length gas with .750 superlative adjustable gas block.
Palmetto state bolt carrier with JP high pressure bolt
15in centurion 7.62 handguard
Geissele sde curved trigger
Magpul stock.
Bipod scope and suppressor and mount not included.
$950 obo
Have a 18in BA heavy barrel in 6.5 creedmoor I can though in for $100

$350 each shipped

XL Defender 5 MOA
Compdot 5 MOA
Compdot 8 MOA

New, factory replacement. Love the scopes, but switched to Burris. No Trades or offers, please ZELLE or USPS MO only-$1120 shipped insured USPS.

Selling a used but in great conduction Matrix Pro in ODG. All the accessory goodies. Bag rider is the only thing that has the scrapes (concrete benches suck)
REM 700 S/A
Full internal weight kit

$1200 shipped Venmo preferred

I need to sell this fast to fund a machine, so priced it at $7500+shipping.

The unit is in great condition. Was never used, just tested.
The only possible trade I’d entertain is for a Leupold 2-10 + $6000 + shipping.

Let me know if you have questions. Thanks.

Several mounts available. I'm consolidating quite a bit so these are no longer needed.

Like new Reptilia AUS 34mm fde with Acro Rof-90 top ring.... 325.00 shipped

Excellent condition Reptilia AUS 34mm fde... 240.00 shipped

Black reptilia AUS 30mm mount with Acro Rof-90 top ring like new.... 325.00 shipped

Badger condition one 30mm tan 1.54 20 moa like new. 260.00 shipped

Razor Gen III for sale. 6-36 power. MRAD. It’s been lightly used. I would describe it as very good condition. Comes in the original box, with original booklets, throw lever, and sun shade.

$2200 shipped in the continental U.S. PayPal F&F or buyer pays 3% for G&S.

360 rounds, would prefer a face to face, but will ship if a local deal cannot be reached.

I’m located in coastal South Carolina, but travel between Charleston & Wilmington NC weekly.

$525 shipped
$475 face to face
Zelle for payment

Below are SG Ammo prices, these were the lowest I could find, if you find it for less let me know & we can discuss it.

Posting this as a copy from my post on the Long Range Hunting Forum here: https://www.longrangehunting.com/threads/left-hand-custom-308-win.368747/

Tentatively putting this custom build up for sale. Custom parts listed below:

- 24 inch Proof 1 in 10 twist .308 Win Chambering (Will post exact round count later) with integral radial muzzle brake
- XLR Magnesium Chassis (small wear point where the bolt can contact the cheek rest)
- Triggertech diamond single stage flat trigger
- Terminus Apollot Lite/Ti left hand short action with 20 MOA rails
- Put together by The Gunsmith in Mesa, AZ
- 7.4-7.6 lbs on the scale without magazine.


Accessories that I can include:
- Hellfire Match 30 cal muzzle brake (5/8-24)
- 308 PMAG
- 308 Ammo & Brass:
134 Pieces of Norma Brass
39 Pieces of Federal Brass
10 Pieces of XTAC PMC Brass
20 (20 round) boxes of Norma Large Game Ammo - Swift A-Frame 180 grain
1 (20 round) box of Norma Whitetail Ammo - 150 grain
2 (20 round) boxes of XTAC PMC Ammo - 168 grain
6 (10 round) boxes of Norma Bondstrike 180 grain Medium Game Ammo

Will purchase a rifle case to ship the rifle in if desired.

Price: $2800 shipped - Paypal F&F

RifleKraft & Sniper's Hide are going back to Cameo Colorado !
Login to view embedded media
We will be conducting a 3 Day class in Cameo Colorado

When: June 18th to 20th 2025
Where: Cameo (Palisades) Colorado Shooting Facility
Who: 6 -12 Shooters
What: Mountain Hunter Course in Cameo to include use of the Western Hunter Course
Cost: $1200 per student



Don't miss this unique opportunity!

Have a pair of Danner Mountain Light II gortex boots. Size 10
Selling for my FIL, he wore them twice. Indoors I think. Cleaned them up and there is a light scuff on the right boot up front. And each boot has a light scuff on the back. They are alitte dry from the factory and could use a good conditioner. No doubt they will clean up with some leather conditioner.

Still have the fuzzies on the tread. Basically brand new. Looking for $375 PRICE DROP $275 PRICE DROP $225, $175, $150Now. These are $440 everywhere else. PayPal, venmo and zelle accepted. Thanks for looking.

Hello mates,
Has anyone got experience with the Calypso ultrasonic wind meters?


Keen to hear actual reports on:
- 'Bluetooth 30 meters' is this true, connecting to an iphone.
- Actual measurement resolution for direction & speed measurements?
- Any app connectivity?

There is reference to a new 'MINI AB' on their site however the link is broken... I like the idea of being able to keep this on a small tripod off to the side somewhere 5-10 meters away, and keep an actual eye on this data.... Compared to the Kestrel and actual observations.

They are quite expensive so don't want to throw money at random gear without some good reports.

Thanks,
Jim

We are heading to Cameo Colorado !


RifleKraft and Sniper's Hide are Heading back to Cameo Colorado for May 15th !

Those wishing to attend can sign up for the 3 Day Course here: Payment Portal

We have a great time in Cameo, you can check out the Videos we have done there recently. The Staff is always very generous to in terms of access to the entire facility.

Login to view embedded media
Login to view embedded media

Looking to sell my Vortex Impact 4000, I am the original owner. It is wrapped in a multicam black rangerwrap. Comes with original box and hardware. Works perfectly, just moving and will not be able to use how I'd like. Not looking for any trades.

Price: $1350 shipped
Payments: Zelle, venmo, paypal

I can't count the number of ways we are winning.

1. Throwing that utter POS Al Green out for being disrespectful was just awesome. I would have taken that gold headed cane and stuck it up his ass after beating him to a bloody pulp
2. Watching Pelosi not knowing what to do.
3. Watching the Democrats with their little protest signs. I bet David Hogg thought that up
4. DOGE!

List your favorites