But did nothing to go against the narrative that old Potato was fit and mentally sound commander in chief.

Why have none of the enablers of the rape of the Republic been brought to justice- we all know who they are .

I have a custom 43x package I’d like to sell but prefer to trade for a prodigy 4.25 package or OA defense 2011 compact.

43x
TTS customs slide
True precision threaded barrel
Suarez street comp
Holosun hs407k
Recover tactical rail
Rangerproof trigger
Ghost connector
Polished trigger bar
DPM soft recoil spring system
Vickers slide release
Shield arms mag catch
Empire katana magwell
Custom stippling, double under cuts done by generational guns in Iowa.

Possibly more I’m forgetting. In the interest of transparency and honesty, this thing shoots lights out accurate and the trigger is amazing compared to any Glock I’ve ever handled. But, two of the magazines seem to have issues that are common on some generations of the S15. You can send them into shield arms and have them replaced for free, I just haven’t gotten to do that. I’ll also include all the original springs, followers and base plates.


MIE productions level 2 holster on qls (belt not included)

MIE productions chimera holster
Tuxton tactical IWB holster
Olight PL-2 and two chargers
2 15 round s15 mags
6 20 round s15 mags

1250 to your ffl

Like new set of ARC M-Brace 30mm low height rings with box. $135 shipped.

Scope is NIB, still has the plastic on the box. It’s the mil version with the PR2 reticle. Asking $1700 shipped to the lower 48

The Gen2 arca/picatinny mount for the Garmin Xero chrono is compact, durable and affordable. compatible with both arca and picatinny, its a great addition to an excellent chronograph. $30 shipped available in black, od green and orange. We also have the NV bridge mount for the Garmin Xero, $25shipped available in black.

Brand new

$335 shipped

Surplus mount, 30mm

$65 shipped

4 new boxes of 50
1 box with 23 in them
1 redding full length bushing die and 1 body die.

Dies $100
Brass $100 per box so $400 total and I will throw in the 23 brass.
I also have a go and no go guages $ 75 for both.

I would like to sale as package deal.

Would like to move this stuff fast

custom made in the U.S.A the 14.5” arca rail aluminum and is perfect for any application is especially well suited for 15” handguards. it is slotted so you can add grip tape for a superior grip to any surface or bag
i currently have black, od green, fde and dark blue available. asking $90shipped

Another Democrap Darling

Looking to sell my manners prs1 with mini chassis, wiebad cheek pad, area 419 arca rail, and 2 round holder. Not sure which color it is, but it is in good condition.

Looking for $1000 shipped, payments via paypal f&f
Sold!

Looking to sell my Leica Prs 5-30x56 with prb mrad reticle. Comes in mdt elite rings, and with a tenebraex objective flip cap. Comes in original box. Scope is in mint condition, used in 3 matches then kept in the safe.

Looking for $1900 shipped, payments via paypal f&f.

I have a new in box 0MOA LA Mars rail that I’m looking to swap for the 20MOA version. 8-40 screws on both. Let me know if you have one and want to trade.

Is this legit?

Apr 1st seems suss... also, I think I put my name down almost a decade ago.

green338XFirst Sergeant
Rating: 3.1/5 this site
1034 posts this site
308 AR/AR10 Build Info/Picture Thread
10/13/2014 Last edited 10/13/2014 by green338
(2 votes)

---

Let's see your gassers!



Here's one of my ex's

Mega Maten Monolithic receiver sets

GA Precision GAP-10 barrel 20" w/ BO Brake

Magpul PRS stock w/ JP SCS

Geissele SDE Trigger

Spuhr Mount

Schmidt & Bender 5-25 MRAD DT CCW XR



[IMG2=JSON]{"alt":" photo DSC03524_zps477a6cdd.jpg","data-align":"none","data-size":"full","src":"http:\/\/i892.photobucket.com\/albums\/ac129\/green122\/DSC03524_zps477a6cdd.jpg"}[/IMG2]

Rate now:
wareagle700

XFirst Sergeant
Rating: 3.7/5 this site
1317 posts this site
Re: 308 AR/AR10 Build Info/Picture Thread
10/14/2014 Last edited 10/29/2014 by wareagle700
(2 votes)

---

Very nice sir.

My .308:

MEGA MA-10 Receivers
JP 15" Handguard
Badger Brake
Syrac Adjustable Gas Block
Lilja barrel cut to 17.5" from 20" (rifle length gas)
JP LMOS bolt carrier group
JP SCS recoil system
Geissele SSA-E Trigger
Magpul ACS stock
Nightforce 3.5-15x50 in a Nightforce Unimount

This is the smoothest shooting .308 I have ever shot. Accuracy is as good as I can ask for.

This floor plate allows the use of removable magazines. This doesn't come with a magazine. This is for the Howa Mini Action. Distance between action screws is 6.75". $60 $50 shipped.

Show off your AR15"s here

Having an issue with feeding from two Rem 700's both in 6.5 Creed. They were perfect before getting pillar bedded. So now they both shoot fantastic, but dont feed worth a dam. They aways pass the hand feeding dummies test, but on the range is ALWAYS a whole other story; must be the recoil that does something.
The only thing I could find was that after they were bedded, the blind magazine box kinda had some vertical play in it. Noticed that when I took the action out of the stock and bolted the bottom metal back up to it to see how it looked assembled. Noticed the action screws were now too long and would interfere with the bolt. I asked myself how could this be? If this is mated perfectly without the stock, how are the screws too long?
Now I see - the assembled (in the stock) rifle is longer (taller) inside the stock than it is without. So then after it was all back together again and with the floor plate open, I could stick my hand in there and slide the mag box up and down about four millimeters. This to me didnt seem right but I was told by someone there was indeed supposed to be that play in there.
While looking at the mag box, spring and follower design, I noticed the blued steel mag box was different than the stainless model I have. And they're both different than the ones you see on Ebay that have the little tab or eye on back of the box, where I think you can screw this box down to the action.
1. This box that can be screwed down to the action; it seems older. Is it? Was this discontinued? What was it for originally?
2. My stainless mag box has what appear to be laser cuts in it, and the folds to act like feed lips are more aggressive (closer) Why did the design change? Or was one meant for the 308 and the other a 6.5 creed? I dont know. Was it just a product improvement/change proposal over the years?

Looking to sell my BAT TR barreled action, black nitrided, .308 bf, short action, with a 26” hawkhill heavy varmint contour, chambered by blue mountain precision in 6gt .120 freebore 1:7.5, with a apa gen2 lil bastard. Comes with a geissele super 700 2 stage trigger. Barrel has 500 rounds on it.

532pc of alpha brass
100pc brand new
222pc once fired loaded with berger 109’s
200pc once fired not loaded
I could pull the bullets if needed

665 berger 109lrht bullets

3 accurate 308 mags 1 with binder, 2 without, and 2 have area 419 mag extensions. kydex mag holder

Rcbs match master full length bushing sizing die and seating die

Also have a leica prs 5-30x56 with prb mrad reticle, tenebraex objective cap, in mdt elite scope rings.


Looking to sell everything for $5000 shipped, payment via paypal f&f.

Barreled action for $2100
Leica for $1900
Brass for $500
Bullets $300
Mags $250

Sticky this for 10mm Auto load data



I'm doing load development for my Gen4 Glock 40 MOS with RMR RM07 Gen2 with 200gr hard cast bullets from Montana Bullet Works... goal is bear loads.

I purchased .401 WFN-GC from them for bear loads and their WFN-PB practice bullet. Both are hard cast.

Had a lengthy conversation with their bullet guy and he said their WFN-GC has killed many bears and he would take it over a BB or Underwood any day. I'm not going to pretend I know what I'm talking about or exactly what he said because I don't remember 100% but he talked about their mixture vs high antimony. Either way, MBW comes highly recommended.

Today was my first day playing with loads. I loaded up 5ea 6.0-7.2gr in 0.2gr increments n350 with the 200gr Montana Bullet Works HC WFN practice bullet they sell. HiTek coated. Sig nickel brass and CCI LP. Stupid accurate at 10yd out of my factory Gen4 Glock 40 MOS with RMR RM07 Gen2. Don't have any speeds but I will tomorrow. They shot soft and the higher charges were probably in the 1025-1100 range.. zero leading issues. Nice and clean

Guy MBW told me to shoot my same load with the 200gr HC practice bullet and the WFN-GC.. he also said dont worry about trying to get them super fast. He said 1100-1150 is fine they will penetrate great at that speed. waiting for some longshot to arrive to load a good 1200fps bear load with those.

I did chrono the underwood 200gr HC round out of my gun and avg was 1200.. they also started leading the last 2" of my barrel

Also have a Bar-Sto match barrel being made for this Glock 40. Once it's ready they are gonna call me to send my pistol in to have the barrel custom fit. Mostly doing this for better case support over factory glock barrel.with hotter bear loads but I'll take the increased accuracy as well.

Here the Montana Bullet Works hardcast 200gr WFN-PB HiTek coated practice bullet

Login to view embedded media
Login to view embedded media
Login to view embedded media

Here the Montana Bullet Works hardcast dangerous game 200gr WFN-GC bullet I'll be loading to carry in the woods



Login to view embedded media
Login to view embedded media



Here my targets from yesterday with VV N350 and the 200gr WFN-PB @ 10YD



6.2GR


Login to view embedded media



6.4GR


Login to view embedded media



6.6GR


Login to view embedded media


And here is factory Underwood 200gr hardcast @ 10yd 1200fps on labradar




Login to view embedded media

This brake is from J&A outdoors there new line of xl brakes. 5 port 1.25 with a 1 inch nut. I shot it 15 times brand new they cost $250 they are stainless steel.

I'm not sure what to price it at.......

Foundation Centurion like new. Zermatt Origin short action inlet. Foundation arca rail and lead weights. 2 LOP spacers.
I am the original owner and purchased everything new.

$1050 shipped and insured
.
PayPal FF.

Pics in comments.

I have 3 8 pounders that I don't use I have switched over to n568 in my 300 norma improved. No shipping

Going rate seems to be $380 to $400

Fremont county area

I would trade for n568.

7-300 win mag shoulder barrel. 50 rds on barrel. Criterion 1-8 twist muzzle threads 5/8-24 light palma 26 inch long.

$400 shipped

Like to really get this gone

I have 959 of the 197 smk 7mm bullets.

$430 shipped

Open to offers