Sold

Was wanting some feedback from anyone using the L3I w-way cutter head for the Lyman Trim Express. I have heard good things but want more opinions.

I have been getting double charged for my membership for months. Who do I need to speak with about this issue?

Surgeon SA 591 action with a 17.5" .308 barrel. The round count is about 450 rounds on the barrel.

Feel free to message me with any questions you may have. I'm asking $1100 OBO shipped to your FFL via 2nd Day UPS insured. PayPal FF, Venmo, CashApp, or Zelle. I can meet in the Fort Benning, GA, area.

zeiss lrp s5 525-56 zf-mri for sale.

Bought it used, never shot it. Comes with the zeiss rings and everything else i assume these come with, wrenches, manual, sticker and lense cloths.

No marks on tube that I can see. Glass is clean no scratches. Turrets are clean.

$2400 shipped.

I have some bulk bullets for sale.
243 Speer 70gr TNT 750 Count never opened.
$125 shipped

308 Sierra 169gr SMK never opened
$160 shipped

I recent did a build with a criterion pencil 16" mid gas 223w chrome lined. Initial impressions were good, a quick borescope through the bore reviled no obvious defects. It has been shooting factory ammo noticeably better than some of my BA barrels.

The second range day out, I ended up popping several primers causing the FCG to get jammed up. Upon recovering the brass, I found 5 pieces without the primer (out of ~200 rounds), and almost all had ejector swipes. This was winchester/lake city m193. I also tried some pmc x-tac m193 and still got aggressive ejector swipes, but no popped primers (out of 50 rounds). Historically I have found the pmc x-tac to be on the lighter side (chrono 2950 out of a 16", 3120 out of a 20"). I tried this factory ammo in several other know good guns and zero issues with ejector swipes or pressure signs.

I had some really light reloads with virgin starline 556 brass that I used for the first shots in order to start burnishing out the reamer marks in the throat/lands area before making any accuracy assessments. No pressure signs using that ammo. "break in" process and zero pressure signs with that stuff. By "break in" I just mean getting a few hundred round down the barrel before making any accuracy assessments or starting load development.

other info about the new criterion build:
SOLGW BCG
adjustable gas
a5 buffer system w/A5H2, new sprinco green buffer spring

I'm wondering what to do at this point... The only obvious things I can think of is contact criterion or try a larger variety of factory ammo.

Lightly used with ARCA mount

SOLD

Like new Leupold 5-25 Mark 5 HD PR-2 Mil scope in a MPA mount. Bubble level not included. 1.250” scope ring height.

No scratches, mounted and never used.

SOLD shipped with mount.

Hi All,

I'm putting together another large frame AR platform firearm and want to set it up to be semi accurate for long range.

Long story short, I used to shoot F-Class with a bolt action and enjoyed it but it just got to be to much prep/time for me to really enjoy it anymore. (kids, wife, life, etc)

I sold my F-Class stuff and got out of it. I'm putting together another one in 6.5 CM to go out and shoot with the guys but i don't want nor plan to be 'competitive' like i was before.

I have two extra sets of receivers that are not built yet and I already have one AR-10 in 308 that's my 'play' rifle if you will.

I have a new Ballistics Advantage 24" Stainless Heavy Barrel in 6.5 Creedmoor that I will use. (i understand this is not the level of a Brux or Kreiger and not expecting that level of accuracy wither)

Currently i have the following:
BA 24" Barrel
CMC 2.5# Match trigger
Toolcraft High Pressure 6.5 Double Ejector BCG
CMMG Ambi LPK

My first question that i have is which receiver set to use.

Currently i have two, i have an Aero M5 Enhanced set and a Stag-10 receiver set.

I like the looks of the Stag more but if the Aero lends itself to being more accurate I will use that.

I intend on shimming/bedding either receiver.

Thank you

This popped up in YT. I am not sure I fully agree that it is surrendering of the 4th Amendment, per se.

The 4th Amendment is protection against unreasonable searches and seizures. But it is not a shield against all searches and seizures. For example, a warrant with cause or evidence is seen as lawful search. For example, a pedo is suspected of having materials and others have testified or stated that he has such things. So, the cops apply for and secure a warrant. They serve the warrant and find incriminating evidence and are able to arrest the suspect on charges based on the evidence found in the search and was seized by the police.

So, of you a case that is obviously to most a gun case, especially with stickers on it from your favorite suppliers and brands, it is easy to infer that it is a firearm. People put guns in guitar cases but not often the converse.

Police may seize and search a container that seems to very much be a gun case, if looking for a certain firearm. Why they are looking for the gun us not explained here.

And one case he quotes tells of a guy who has a sawed off shot gun but it was in a container that was not readily seen as a gun case. The cop said it was and the cop was wrong and the search was thrown out.

So, reasonable and unreasonable would be the point of the debate. I included the example of the pedo because we want those guys caught and you have to do it be seizing evidence.

Login to view embedded media

ROUND 1 - Target / Bench Rifle

After 10-12 years of shooting aluminum chassis and stocks made with some sort of composite, I felt it was time to get back to wood.

Maintaining the form, fit, function of more modern stocks was important, but I wanted to gain the warmth, feel and beauty of wood.

I looked around and didn't see what I wanted, so I decided to make it myself.

The Process:
- Source curly maple blank
- Carve (rough pass) with router
- Contour and smooth (fine pass) with router
- Cut the inletting (action, bottom metal & barrel channel)

- Sand... there was a lot of sanding!

- Fit recoil pad with belt sander
- Add picatinney rail for bipod (drill and counter sink t-nuts)
- Drop in pillars (checking action/bm fit, alignment & feeding from magazine)
- Epoxy bed action & bottom metal


- Apply tung oil finish (2 coats cut 1:1 with mineral spirits for deeper penetration, 4 full coats)

The Results:

RPR 2nd Gen 6.5 CM Seekins Precision Ruger SP3R V3 Rail System, Magpul PRS, LRI bolt shroud,
Original hand guard and bolt shroud included
About 800-1000 rounds. Optic not included. Muzzle device is Griffin Arms taper mount.
$1000 or reasonable offer

Precision Reflex hand guard, WOA 16” SPR barrel 1/7 , Allen Engineering muzzle device,
BCM receiver .
Optic and sling not included.
Built it has maybe 200 rounds + -

$1000. Shipped to lower 48
PayPal FF, USPS MO.
Login to view embedded media Login to view embedded media

Selling a limited run Safariland 6354RDSO holster. Fits Staccato (XC, P, P w/ comp) + x300 (or similar) light + any size red dot (ACRO/RMR HD sized dots included). Like new condition. Comes with locking fork.

SOLD

No trades please.

Need an Impact Action wrench!

Willing to spend $! Just let me know how much you want for it.

Breaking just now Daniel Penny the marine who put that crazy Jordan Neely in the subway in a chokehold is going to be charged with 2nd degree manslaughter for his death, However if Neely would have pushed some poor mom onto the tracks he would be free by now.

***SOLD***Nightforce ATACR FDE 7-35 Mil-XT with some minor scratches on outside and the top of the throw lever as seen in pictures (mostly from PRS barricades). Glass is great. Comes with an extended throw lever, box and all the other goodies. $2500 shipped.

Athlon helos BTR gen2 6-24x56 mil reticle. 34mm main tube. Comes with athlon rings and is mint. Have box.
316-393-549four text
450$ paypal

Picked this up used a month or two ago and I love everything but the reticle, it’s just not agreeing with my small brain. Has use marks but is in good condition, no glass flaws that I can see. Can upload more pictures tonight if wanted. Has the Gen 3 XR reticle. Currently sitting in a 1.5” Hawkins mount. Looking to trade for a ZCO also in a mount or the other two with/without a mount

Trades: same 525 with a Gen3 XR FINE or JTAC
527 ZCO with MPCT1X or 2X Reticle NLE
March FX 5-42 with a MIL reticle.

Huge end of the year sale on Tactical 22 Cal Bullets - lowest prices anywhere

Nosler 22 Cal 64gr Bonded Solid Base (AccuBond), FBI HRT Bullet - Bonded Core, Solid Base = Excellent Penetration and Weight Retention (Free load data on the Nosler Website) - Starting at 25.1 Cents Each
https://ravenrocksprecision.com/nosler-22-cal-64gr-bonded-solid-base-bullets/

20% off 55gr HPBT GameKing - $71.96 / 500 ct - These are the bullets used in Federal TRU (Tactical Rifle Urban), they're a proprietary SMK with a smaller hollow point opening - Not many of these left (coupon code SIERRA20)https://ravenrocksprecision.com/22-cal-224-55gr-hpbt-gameking-bullets-updating/

Login to view embedded media
Looks like it’ll be before SHOT Show so definitely will check it out there.

Toying with an idea, anyone have an LMT’d Proof 16” .308 barrel?

UNITY FAST MRO Mount



Designed for Trijicon. Features a fully adjustable integrated rear back-up iron sight

Fits Trijicon MRO and MRO-HD

2.26” to Optical Center line

Fully Adjustable Rear Sight


Shipped. PP+4%, Check, USPS Money Order. No Trades.