EC Tuner Brake V2, black nitride, 6mm, 5/8x24.
In in excellent condition, no marks to speak of and a perfect stocking stuffer!

$165

Purchased a rt1500 to eventually trim about 30k of LC military 5.56 brass. I have a giraud but thought this would be quite a bit quicker. I’ll be reloading on my rl1100 but planning to do the case prep on my xl650.
Anyways, set it up properly and all the brass comes out really rough and not consistent. Switched the blade around and same problem. I live 20min from Dillon so I stopped by a few times and had them check it out. They said everything looks good and gave me a new blade. Tried it again and everything was still a rough cut. Finally took it in today and set it up in front of them. The only way to get a clean, square cut was to run it through the trimmer twice. After the second time, everything looks great. Dillon didn’t have a solution.
Are the stock blades too weak? Seems strange that guys use these for 300blk conversion but I can’t take a few thousandths off of 5.56 brass.

Hi,

New member here, anyone have real world experience with a howa 24" 1:10 twist shooting berger 87gr VLD hunter out to 600m? I will be working up a load using H4350, i know the 87gr Vmax shoots great but i want the bergers to work and im reading conflicting posts about them so i need some info please. If you are shooting them, at what speeds are you running? The berger twist rate calculater gives me GS of 1.38 to 1.4 in my conditions, is it worth working up the load. It will be for hunting/varminting out to 500 600 yards. Thanks

(WTS) 2 Vets Recon 2 LS Tripod, Anvil 30 conversion bowl with RRS Anvil 30

Recon V2 LS Inverted W/ Leg Stopper, Anvil 30 conversion Bowl with Really right stuff SOAR Anvil 30- accepts both arca and picatinny.

Tripod and mount are fantastic condition. Have never even been shot with. I paid over 1.1k for everything included here.

Willing to let it go for $900

Looking to throw a lpvo on my MWS and pretty sure I have it narrowed down to these 2.

Sr5 reticle on the Vudu and the DMX on the nx8.

Anyone used both of these and have a comparison? Both are same price point and you can get the vudu for significantly less right now. Glass, illumination, actual useable magnification max?

Do they both suck enough it might be worth saving a bit more and getting a used atacr 1-8?

All prices include shipping. Unless requested otherwise, Ill ship USPS Priority. I can accept Venmo and PP FF. If these dont work for you, we can dicsuss options.

Warhorse Comanche (standard fill) Ranger Green: $100 SOLD
Few years of use, only a few matches, still in very good shape, no frays or tears.

Warhorse Traveler (standard fill) Ranger Green: $30
Same as the Comanche.


Precision Underground Recon Mini (lightweight fill) Tigerstripe: $75
Only used it for about year as my primary bag for "deployments" (weekly use on the range).

Wiebad Berry Bag Multicam: $30
About 4 years of ownership, weekly use on the range up until I got the Recon Mini. Still in good shape, the loop is starting to become fuzzy.

Redtac Halfpint Ranger Green: $15 SPF
Used it a few times, still in good shape.



Hill People Gear Original Kit Bag: $75
Owned for 5 years, used it for backcountry hikes, (about 200 miles). Still in very good shape.



Triad Tactical Leupold Mk4 12-40 Spotting Scope Cover Black $50
Second owner, still in very good shape, just a little dusty from the last match I used it in.

RRS Leupold Spotter Plate: $40
Second owner, very little wear on the mounting surfaces.

Sent it off about a month ago and already got it back...Not sure how it got expedited by Ironsight, but I am not complaining

-Cleaned/resealed/No2 purged
-Crosshair reticle installed
-Target turrets installed
-Parallax set for 50 yards

Still wondering what the 'M' in K4M means...I haven't found a single reference or mention..same thing with the 'tracker finish'. If anyone has any insight on either of those, I'd appreciate it.

This is a purpose 25/50 yard scope for CMP rimfire games.

I have built a new PRS rifle for next season. I am wanting to sell this rifle, reloading dies, loaded ammo, extra brass and extra bullets as a package

Aero Solus 22" 6.5 Creedmoor
Bravo stock base w/ enclosed forend, arca rail, and weights added.
15lbs without scope, well balanced
Little Bastard Muzzle Brake
Hornady Custom Grade Dies
170+ Loaded Rounds (140 eldm over 41.5g H4350, 2660 fps in this rifle)
35+ extra brass Hornady
150+ 140g eldm factory second bullets (shoot just like reg eldm for me)

$2500 shipped

Maven RS3.2 5-30 CFR MIL. Good condition, one scratch as pictured glass is clean. Nice lightweight, high mag optic. Used on one hunt. Just switched back to an LHT. 1175 shipped. Has the slip cover, the flip covers. No factory box

Looking to get a mount for my ai elr 50. Purchased a Schmidt 6-36 with the mt2 turrets and have 39.5 mil to work with. Rifles already has a 45 moa rail. My question is would a 20 moa mount be pushing it to close to the extremes to get a 100 yard zero? Or should I jutst grab a 0 moa mount. Wasn’t sure how optical quality would suffer at the bottom of adjustment. Do plan on mostly shooting this 1500 yards plus so will be dialed up closer to the middle majority of the time. Thank you.

sold

I recently acquired some brass that I have decided to sell, due to the fact that I don't have any rifles chambered in any of these cartridges, and don't really want this brass hanging around tempting me to build new rifles. All of this is "new old stock" condition, unfired, just been sitting in cardboard boxes for who knows how long. I'm having a tough time finding comparable listings to get estimated values. If any of this is way off on price, feel free to let me know. Prices include shipping, will reduce price for shipping costs on multiple items.

99 ct R-P 8mm rem mag - $180
100 ct WW Super .375 H&H mag - sold
100 ct W-W .300 H&H mag - sold
100 ct R-P 7x57mm mauser nickel - $100
100 ct WW super 7mm rem mag - sold

Brand new Bushnell Elite 4500 1-4. Won at a match and have never used and no need to keep. These are discontinued so can't find much for pricing information. Looks like they were about 250 so I'll do 175 shipped.

I only post on one public forum ( here ) and one private forum. The best private forum by far is allthebilge.com .

Nothing illegal but anything else. Probably some softies here that wouldn't make it past week one but check it out . Right wing, God loving, gun toting people that separate the bullshit from the facts of life.

in stock again 495.00 per 1000 mil spec telaimpex , i have NOT found it to be corrosive i bought 3 k of it so far it shoots fine but i have yet to range run it at 100 yards rested

Gauging Interest in a build I did this summer. Money is real tite and trying to free some up. Build consists of:
Howa 6.5 Grendel 22" threaded light barrel
Warne 0 moa base, was bedded on the action.
Bell & Carlson m40 stock in factory desert tan camo.
Oregon gunsmithing metal bottom metal.
Dead air keymo muzzle brake, mounted with red locktite (factory recommended and easier to remove than rocket).
Trigger is still factory OEM.
painted with Brownells aluma Hyde. Barreled action was etched to remove bluing before coating. Other items still have finish under coating. This was intended for a predator rig.
25rds through it suppressed. Got to about 3/4 moa with factory and took out several ground hogs. Looking for $650 obo. Scope and rings posted separately now. Immediate payments only no money orders or checks.

Looking for a 34mm extended mount
1.5" high
Ideally with QD

Brands:
Spuhr
ADM
Geissel
Reptialla
Or similar quality

I’m on the fence to buy or build a 22 creedmoor… that being said I have the chance to buy a fierce 22 creedmoor for a good price. Only problem is it’s BDL. Which I absolutely hate and would prefer a magazine for predator hunting.

Is there any conversion for a fierce rifle to go from BDL to DBM?

I did email fierce and they just tried to up sell on a different model.

I've got a smaller, but beautifully coated bobcat that likes to walk one of our trails here on the ranch this year. I'd really like to save the coat of this one, and won't just be shooting it like I do the others when I happen across it.

I've had good success snaring coyotes in the past, but I really don't do any trapping with every other commitment I have here that eats time. My experience is limited to snares and 330 Conibears...and dogproof coon traps that I do actually use frequently (but that doesn't really count). My experience for bobcats is ZERO.

So if you've caught some cats, I'd love for you to link perhaps a video that shows a successful method...or if there is an idiot who makes a lot of bad videos, I'd love to know whose content to avoid. The stuff is all over YouTube, but I've seen some conflicting methods.

Any insight is appreciated.

Pic for reference, sorry for the shitty photo of a photo.

Just finished putting a second firing on this brass on Saturday. Cleaned in walnut media. Annealed after first firing.

Moving to .25 so no need for this.

Asking $120 shipped

Cash app or PayPal ff only

Brand new Proof Comp Contour 26" prefit 6 Creedmoor for a Defiance Ruckus. $500 CONUS or trade for 6 Dasher **SOLD**

Login to view embedded media
She is a democrat and a commie BUT introducing a package of bills to actually investigate law enforcement officers before hiring/ job swapping . A FIRST of its kind bill in this state - no more Brady officers just going down the road or across state lines and finding employment again - Listen to some of the things they mention in the story- unprovoked violence, assault, narcotics use , drinking on duty , wife beating and perjury. No longer will be able to play the shell game of resigning and moving down the road . Fucking Finally.

Never used Really Right Stuff Cinch Bino Mount
$45 shipped

Colt SP1 for sale

Comes with bayonet and sheath and magazine pouch with 4 magazines

Fewer than 200 rounds fired

$1200 shipped to your FFL
PayPal Only

Selling 3D printed thumb rests for the MDT ACC. Printed out of PETG, which has great chemical and impact resistant properties.

Attachment to Chassis:
- Option 1: Using the provided double sided tape (Preferred method)
- Option 2: Remove plug that provides accommodations for a 10-24 screw (Requires tapping your chassis and recommend using double sided tape as well)

Whats Included:
- Left hand, right hand or both versions of the thumb rest. (Please Specify when messaging me)
- x2 double sided tape
- x1 10-24 screw
- Alcohol prep pad

$25/shipped