It's about time!

Login to view embedded media

Figured i'd get the Tempest thread back up.

I have a Colt 44 mag I love and am looking at a lever action Marlin in the same caliber...partly because ....lever gun...and because I already shoot 44 mag so its not adding another caliber.

I'l looking at some practice rounds bu the same manufacturer one in 200 gr TMJ and the other in 240 gr TMJ.. The manufacturers site gives velocity, 1350 and 1220 respectively. I'm wondering, will the smaller buller at a higher speed do more damage than the larger bullet at a slower speed.

And yes I know if I were carrying it for self defense forget the TMJ and get the HP.

This is a catch and release from a few months ago but I don't make weight for NRL Hunter so had to get an NBK. It's RH 308 AW cut. $1275 **SOLD**

Hoping maybe our resident KAC stud @Jack_L can answer.

I assume there are zero issues, but figure I’d axe anyway…

Any issues running 855A1 through a factory SR-15? (Both CQB and Carbine uppers), with 5.56 QDC. Also running Sandcutters, not that it likely makes any difference.

One of the guns:


More for wrmfzys than anything. Will probably put 2-3K of A1 through the above gun over the course of a week.

Looks like a pretty reasonably priced trigger @ $119

Anyone have feedback?

I was wondering if anyone has used Quickload OBT and compared this with OCW to see how if they result in similar load data. I have shot my most accurate / smallest groups using OBT.

These have been used a good bit, been to some matches like Mammoth and show some wear/scratches. They function perfectly fine.

You can click the link below to see a ton of photos, including a few I took through them on Friday ranging different distances.

The harness and wind meter were never used.

This model has Applied Ballistics built in.

Login to view embedded media
$1,100 shipped. sold pending funds

I have been shooting pistol pretty heavy this year and I am very low on factory 9mm ammunition. I have a load with a heavy bullet that shoots softer and works, so I would like to load up a huge pile of it.
Have any of you used Servicios y Aventuras primers? One guy I asked said he didn't like them, another said they seat in the brass a little rough but all worked. I also see Magtech primers, Ginex, Fiocchis and a few others. I have only loaded CCI, Winchester and Remington before and never had a problem with them.
I am thinking about just getting 100 or 500 of the Servicios y Aventuras to try out, then if they work I'll order up 10,000. That would keep my 9mm fed for 3+ years.
I know 10,000 isn't a lot for some of you guys, but I'm not lucky enough to shoot as much as you.
Thanks in advance.

This is my first competition and I’m trying to get some background info on it. Mike (from Altus) called it outlaw PRS. Anyone have anything to add.

Started off as a CVA Paramount HTR in .40 cal.

Now has a Mark Woodman Smokeless Brux Barrel Conversion in .45cal

-Breech Plug
-Bolt Conversion
-Bigger Recoil Lug
-(39) modules
-Muzzle Brake
-Funnel
-Triggertech Primary Flat
-20ish sized 300gr Fury ST2s

Current load of H4895 is shooting a 300gr Arrowhead NSR @ 2900FPS. Rifle shoots absolutely phenomenal and I've shot easy MOA groups out to 600 yards.

$2,300tyd, conus, for rifle and scope rail. $2,100 for barreled action. Scope, bipod, arca rail and Impact 4000 not included.

New never used. $65 shipped.

Has anyone ran there Impact 4000 on a thermal? If so, did you have any issues and was the screen bright enough?

Brand new in box, rings are 34mm Low .92” diving board is sold. $135 shipped.

Photonis Echo WP PVS-14

-Photonis Echo WP tube

-Milspec housing/lenses

-Purchased in 2021 from Custom Night Vision. Very low hours I used it as a loaner.

-Now selling without Wilcox J arm (on/off version) and Phokus Hoplite focusing cap (sold already, price reduced further accordingly)

-Lost the hard copy of spec sheet but have digital copy.

Specs:

SNR: 30.83

RES: 67

HALO: 0.84

EBI: 1.4 (converted to freedom units. Spec sheet number is .14)



Very light almost transparent peppering not noticeable in use (see white wall image for details)



Paypal or Venmo preferred

*SOLD* $2,000 *SOLD* Shipped and insured

the attacks on trump and his allies continue.


actually surprised they haven't gotten worse. they will as planned. when the traitorous,corrupt congress reconvenes i bet it escalates. violent attacks on the agenda as well.
my concern is that trump has no reliable armed force at his disposal. dc pol,cia,fbi,schutz staffel,irs,all other fed armed bureaus likely be absent or involved in an overthrow. military is very suspect in terms of ability,motivation and willingness. senior command is all beholden to deep state.

Looking for a S&B PMII 4-16x42 Preferably a Single turn turret but open to dual turn as well.

Lightly used Steiner C35 Gen 1. Bought this to hunt coyotes and ended up selling the land after using it once. I have misplaced the manual. Comes with what is shown.

Sales only to US persons in the US. Don't blame me, blame ITAR.

SOLD

I can take PP F&F or a check.

Cross-posted, so first "I'll take it" wins.

New in the package AAC Titan QD muzzle brake. 5/8-24 threads.
$150 shipped. Paypal FF. No trades.

Unfired. Bought this but thinking of going another way, so its for sale. Not desperate, if it doesnt sell I'll keep it, damn nice rifle.

As above, 26" stainless barrel, comes with all that came from factory including sweet little carrying case. Though I havent fired this one, any quality 7mmPRC should reach a mile or more easily. I did it with an inexpensive Bergara. Scope and mount not included.

$1625 TYFFL, save the tax unless your in Oklahoma then FTF. Really looking for cash but possible trades might be:

-Springfield Armory M1A in 6.5 CM +/-$$$
-AR 10 in 6.5 CM +/-$$$
-Smith and Wesson Model 1854 in 44 Magnum With cash on your end.














Description
The Seekins Precision Havak Professional Hunter PH2 is another step forward in the evolution of American made hunting rifles. The Havak action uses 4 locking lugs and allows for a 90° bolt throw. Unlike most actions that place the bottom bolt lug behind the feed ramp, the Havak action places the bolt lugs at the 3 and 9 o’clock positions. This design keeps the feed ramp unencumbered and enhances feeding reliability. The action comes with a pre-installed 20 MOA Picatinny rail with (5) 8-32 action screws allowing for wide variety of scope mounting choices. The barrel of the Havak Professional Hunter is finished with a stainless steel bead blast on the 5R spiral fluted barrel.
The Havak Precision Hunter 2 is hand bedded with aluminum pillars ensuring a perfectly free floated barrel. The newly designed Carbon Composite stock used on the Professional Hunter 2 is designed and manufactured by Seekins to be lightweight but still able to handle even the most extreme natural conditions. The rifle comes with a detachable 5 round PMag or a 3 round carbon fiber magazine based on the selected caliber.

Features of the Havak Professional Hunter PH2 Rifle :​

• Seekins Precision HAVAK Action
• Newly Designed Carbon Composite Stock
• Spiral Fluted Barrel with 5/8x24 Threading
• Detachable magazine system
• 20 MOA Picatinny Rail with (5) 8-32 screws
• MagPul 5 Round PMAG for 6.5 Creedmoor, 6 Creedmoor, and .308 Winchester
• Carbon Fiber 3 Round Magazine for 6.5 PRC, .300 Win Mag, and 28 Nosler
• Bead Blasted finish
• 4 locking lugs with 90 degree bolt throw
• Full diameter bolt body
• Integrated recoil lug as well as a lug for top Picatinny rail
• Helical Extraction Cam
• M16 style extractor

---

Specifications

• Caliber:7mm PRC
• Weight:7.2 lbs
• Action:Bolt Action
• Trigger:TriggerTech Trigger
• Rifle Barrel Length:26"
• Rifle Barrel Twist:1:8"
• Barrel Thread Pitch5/8x24
• Rifle Stock:Carbon Composite
• Scope Mount:20 MOA Picatinny Rail with (5) 8-32 screws
• Magazines Included1) 3 Round
• Iron SightsNo
• Caliber or Gauge:7mm PRC
• HandednessRight Hand
• Item ConditionNew
• Product TypeRifles
• UPC811452025622
• MPN0011710159-F-DS

$40 USD each set shipped in CONUS

$70 for both.

Selling my 29" Bartlien 6.5 MTU contour barrel blank with 1:8 twist.

$425 shipped

For sale is a new in box pure precision skltn action in right hand. Comes with top rail rail mounting pins and screws and trigger pins.
No trades. PayPal or Zelle only.
$950 tyd

I just put together an 8x57 AI, because I'm weird and I like 8mm crap and hate money I guess.. I got the reamer inspection report from 4d, so I have that info, plus the crappy cartridge drawing on their reamer info page, so I have been trying to build it in GRT, so that I can estimate load data on something that really doesn't have any published info at all. Can you please lend me some help with this by verifying that I have the information correct?

Thank you for any help you could lend me. This is my first time with a "wildcat" cartridge.. A whole new learning experience for me for sure.

Bartlein carbon wrapped 6.5mm 7.5tw Rem Varmint 22" Shouldered pre-fit barrel for Apollo in 6.5 Creedmoor [140-144 gr Bergers] .199 fb threaded
5/8-24. Cut for an Apollo by Southern Precision Rifles, cerekoted sniper gray.
$800 tyd. Shoots great and barely broke in.