5/8x24 muzzle threads, .135FB .274NK, chambered by Blue Mountain Precision. Has between 600-700 rounds through it. I didn’t get better than 1.0 moa with it.

Looking to get $300 shipped.

I have a like new less than 50 rounds down the tube 6mm Creed 24" Carbon Zermatt TL3 pre fit. I would like to trade it for a 308 or 6.5 Creed in a 20" or 22" barrel.

I'll post a picture of it in the action as it's all still together. I really don't want to sell it but I will for $800 Shipped net to me. You cover the fees.

** Nephew killed 2 deer with it opening weekend of KY season. I can get you all the pictures you want of the barrel.

Lightly used and in excellent conditions. Glass is crystal clear, no scratches or marring on scope finish, turrets are nice and tight. Comes in original box

Tube is 34mm, reticle is ERB7C MOA

I also have vortex throw lever and tenebraex scope caps that can be negotiated in.

Scope alone is 2100$ shipped
Text 978-844-6896 with serious inquiries only

I bought this rifle new from Eurooptics about 1.5 years ago. The barrel is the original Bartlein barrel and it has 1000 rounds in it but still shoots 0.2 - 0.3 MOA (I'm including target for the last seating depth tests).

The Ace brake is included. With this brake, no blast or recoil is really felt.

Bipod, scope and mount are not included.

$3600 shipped.

L3 lwts shot count 480, extra battery carrier, adm throw lever mount and original thumbscrew mount, clip on eyepiece and shuttered eye cup. Not the original owner, sent it back to l3 to fix a collimation issue and it has been great since.

$5k

I put this together from a builders set years ago and it’s never been fired.

Sp10 builders kit
22” proof 6.5 creedmoor ss barrel (not carbon)
Seekins select gas block
Solgw marked Lmt dual ejector bcg
Raptor ambi charging handle
Seekins ambi safety
TT diamond flat shoe ar10 trigger
Ergo 0 degree grip
Lmt 308 buffer tube and Dmr stock
Tubb flatwire spring
Unsure of buffer
Sawtooth rifles full length R-lock dovetail rail
Has an a419 hellfire adapter that I can take or leave.
$2700
Will entertain offers to part out.

Weibad mini stock pad, off an MPA $30. **SOLD**

ColeTac tripod leg wraps. $45.
**SOLD**

Brand new Aero Pro Ambi AR safety selector $40 **SOLD**

I traded into PWS 6.5 Creedmoor with a 18 inch barrel. I know that they are a long stroke piston rifle. My question is as I no nothing about piston AR platforms is can it be rebarreled as is or changed over to a DI rifle down the road if you shot the barrel out? Are the upper receivers different to a DI upper? Or would you have to send it back to PWS to have a new barrel installed?

Thanks,
Dan

So I just bought another Christensen MPR this one is in 300 WM . Now I have no illusions on making this a true bench gun , ( primary use Elk hunting ) However I would like to add some weight for range use . ( just taming the recoil even further )

I am aware that there are some ways to add weight to other chassis but there does not seem to be a " kit " for this gun . I happen to have a few machines that I own for my shop . Mill lathe ( I build engines for a living) So I can make my own weights if machine work is needed . However I am thinking that a better way would me to mold a few items with tungsten powder . Sure it may not have the race car look of a machined part but the weight factor is much higher .

I could make a long weight under the barrel , The grip being hollow another fine location , and making a insert for the lower butt stock portion as well .

I have used the search function here am aware MPA makes a bag rider for it . I do not want to buy anther chassis for it just a way to easily add weight for a laid back range session and for the one or two hunts a year shed the weight and I am back to the low weight pack rig I like .

I am open to opinions All and any . suggestions from guys that shoot more from the bench as well .. I have not had much time for range shooting but that has changed some and I am now just starting to work with my friend as his spotter and he does shoot in matches . It re lite the spark for me , as well decided to forgo the deer lease this year to open up some more time .

If I am way off base and I am just spinning my wheels again open to suggestions

Thank you for reading

What’s a good rifle case that is big enough to handle & be wide enough to handle a scope I’m wanting a soft case

New Gen 2 Cyke Pod Double Pull

GONE

https://mdttac.com/mdt-ckye-pod-double-pull/

Factory HK45 threaded barrel. 16x1 LH threading. As you can see from the feed ramp, very low miles.

$285 shipped. No trades. Paypal F&F (preferred), venmo check/mo.

Looking for recommendations on powders and bullets for a 24" barrel 25-06 that will hopefully decapitate coyotes. I would prefer good load density and velocity, and not a lot of speed variation from ~55 to 10 degrees or so.

I have a few Reloder powders available 17.19.22,25,26 both 4831's, h4350, and others. Plethora of bullets 85/100/115 grain Nosler Ballistic tips, 117 SST hornadys. I may have a box each of 90 and 100 grain Sierra matchkings.

In the past I used imr4831 and RL19 in a 26" barrel with 85/100 grain fodder.

Definitely NOT interested or concerned about saving hides, but am interested in shock and awe and painting the country side or snow.

If interested, the popular Razor 1-6 Gen 2 HD-E in SPF with a 5.56 BDC reticle used by SOCOM. Comes with a pretty nice Armageddon soft case and an extended Vortex mount. We have been selling the Razor 1-6x with a Geissele SOPMOD mount.

Probably the Geissele mount is nicer, but for our core customers, getting a true SOCOM contract is always nice.

You can DM me if ready to buy. We have a limited number, but have an allocation for 'hide member treats.



https://charliescustomclones.com/vo...com-kit-with-mount-and-case-contract-overrun/

new in box apex rival 4-32, has the 15 mil turret $1600 obo only removed from box for photos selling to pay some debt off make offer



As-is

No returns/no refunds

Pp ff or ven

Pm for payment details

They have a listing on Guns International and their email comes back as EP International LLC which when I dig is an importing company for UK originated firearm transfers/imports. My Gun Import webpage has the same person I am conversing with. The map comes back to a residence. I cannot find anything other than what I listed. Hoping someone has a clue.

I appreciate any help.

Address listed is:

EP International LLC
1315 23rd St S, Arlington, Virginia, 22202, USA

Found this on Gunbroker FFL search

That a bunch of faggots have time to raid a home to kill chickens because eggs from Vietnam are illegal??

But the chickens were born in TX but faggots gonna faggot I guess

Used but in good condition. Works perfectly, some finish wear from use.

$70 TYD via Venmo/PayPal. Ships USPS with tracking.

Trying to sell or trade my Seekins Precision Havak HIT in FDE/6.5CM. I have a Leupold Mark 5HD 5-25x56 with the illuminated Tremor3 reticle, mounted in a Badger Ordnance Condition One mount with CLIF top ring allowing you to run coaxial rangefinders and other accessories. I have some 6.5CM ammo and brass that I can throw in as well. Gun shoots great but I just don't use it as much as I thought I would- less than 200rds through it.

Price: $3500 OBO.

Looking to sell F2F in the DFW area, I am located north of Dallas. May be able to ship FFL to FFL with added cost.

Looking to sell my lightly used vortex razor UHD 10X42 binos to upgrade to NL Pures. Comes with original box and bino harness. Asking $1300 shipped.

Very nice condition and a little rarer color for the canebrake. This model is chambered in 300 Blackout. It has a Triggertech MCX trigger and Radian Raptor installed. It will come with the faux suppressor and Magpul pro irons as well as the SB brace. Does not come with the Eotech but can include a Vortex UH-1 instead. Asking $2500 OBO.

Looking to do F2F local to DFW TX on this one.

Mint condition in the box with all accesories. SOLD

no trades

Turn key set up ready to go. I have a PVS14 in green phosphorous, gen 3 tube, refurbished by Night Vision Network. Does not have spec sheet but is a pretty clean tube. Perfect for an entry into the night vision world. Comes with Norotos rhino mount, 2 j-arms (1 is a Wilcox arm) and adjustable iris eyepiece. It will also come with the surplus bump helmet, with peltor installed on the arc rails. 3M gel ear cups have also been installed on the peltors and the comms wires are not cut.

Looking to get $3000 OBO, prefer F2F local (DFW, TX) but can work something out to ship if needed.