Hello Hide,

I want to do a new build - 338 LM.

I already have the barrel blank - bartlein 5R steel 32 inch blank in 338

I’m asking for help because the barrel shank is 1.35 inch and tapers down to an inch. What action options do I have because of that?

I’m new to builds like this but it looks like some actions need 1.25 and some need 1.35…?? I’m out of my lane on trying to understand these things, but is there any reason why my 1.35 inch diameter barrel can’t fit an ARC CDG or impact? I was also thinking about a defiance action too.

Thank you

So, some time ago I got a great deal from PSA on a new Armalite M-15 Comp AR 18”. It came threaded from the factory.

Bought a RC3 and the requisite Surefire muzzle device. In my case, that was the 4 prong flash hider.

A year later, still waiting for that damn suppressor to get out of jail (contacted my congresswoman to talk to the atf).

So I have had no use for the flash hider as I shoot 100% suppressed. Suppressor works fine; barrel threading seems to be concentric enough to give me zero baffle strikes. Two suppressors shoulder up fine.

Ok, back to my plight. Bored, I go to thread the flash hider on, and it won’t go flush to the shoulder! It’s pretty close, but I see a silver of daylight peaking through. I’ll measure it tomorrow with a feeler guage, but the gap looks like the thickness of 2 pieces of paper.

Confused, I clean off any crud. Still won’t go.

I break out my calipers with the depth gage.

Flash hider: The depth from shoulder to the bottom is ~0.625”

Length of threading on the barrel (muzzle to shoulder). ~0.625” or maybe a hair over.

TBAC has thread specs that state the threading should only be 0.600” long.

Now, maybe this is why PSA was blowing these out? I need to call Armalite tomorrow about the dumb length of threading, but is my info off base?

I am looking at my first AR10 build. Currently I have Aero Lower and getting an Aero upper with a 15" hand guard. I want a 308 gun as I don't have anything in 308 yet and feel its a cartridge I should have in my collection. I want something around 20". I really like the looks of this Faxon Fluted 20" Barrel that's coming out. I dont know for a 500-1000yard gun if that barrel is going to be good enough. I really like the fluted barrels and know they can cause a POI shift. Any insight would be great. I am not looking to plow through and purchase everything today but would like to get high quality parts over time getting some of the bigger purchase items during black friday if possible.

Great shape includes both the Larue QD pic mount and Area 419 Arca clamp mount.

$320 shipped.

Staccato CS...........Let's sell this..........$2500.00

Came from my brothers estate, unfired when I got it, I put 20 rounds thru it............as new..........3 mags, everything that came with it..........$2600.00 to your FFL, if you live in Kansas, we can talk about it.......USPS money order, Cashier's Check, or personal check, will hold shipment until checks clears............
With the extra mag, this is $3200. retail










Quote Reply
Report Edit

As the title suggests, I am searching high and super low for a reasonably priced TT 5-25 (gen3xr preferred but will entertain other reticles) or a s&b 6-36 with the DTII+ turrets (GR2ID or TR2ID). No mounts or rings needed.

Guys,
Now that Williams is closed, where are you finding Post 64 steel bottom metal for your M40A1 builds? I already know to stay away from TMA.
John

Mega arms upper and lower, proof 20” carbon fiber 6.5 creedmore. Magpul PRs stock, superlative gas block. Lantac bc and JP bolt, Geissele trigger
$2100 or trade for a 22 arc have $2000

Nightforce TS-80 Spotting Scope 20-60X80MM
Nightforce Cover
Box

$1300 Shipped

On my AR 15 the brass ejects at about 4:30PM from the ejection port, very consistent. It's where it always has thrown spent brass. No issues.
On my AR10 308 it's throwing them out at about 1PM from the ejection port. I have an SLR adjustable gas block set to function consistently. Is there anything I can look at to get the AR10 to eject like the AR15 (4:30PM). Or does it really make any difference?
AERO Precision upper and lower, AERO mlok handguard, Craddock Precision barrel 18" (Bartlein 1:11.25) with headspaced JP bolt, Triggertech Diamond trigger.

I like the older Remington stainless actions and have found some for sale at a good price. Honestly I prefer the ones I have to the ARC CdG I just sold. Nothing wrong with the CdG but the stainless Remy just appeals to me, seems a bit smoother. YMMV.

I'm looking to build a 7 PRC or maybe a 300 PRC. The actions are either Long Action/Magnum or 30-06. The LA is back ordered but the 3006 is in stock. would either, or both work?

For sale:

Used TBAC SR brake, 5/8x24

$110 shipped. SPF

PMs only, no posts please

Zermatt Arms RimX build.

-Harrell's Tuner.
-22" 1:16T Shilen Ratchet barrel spun up by Elemental Industries. (Barrel does have a slight taper towards the muzzle).
-Foundation Stock with forend weights perfectly balanced in current set up.
-Foundation Arca Rail System.
-Single stage Trigger Tech Diamond curve.
-Wiebad cheek cover.
-Tract Toric ELR 4.5-30x56(MRAD).
-Vortex Pro Rings.
-3 RimX Mags(two with extensions from factory and Hoz&Shield).

Parts-
I have a new bolt face and firing pin assembly installed on the rifle. I have the old parts which are pictured below as well as extra parts such as springs and extractors.

Sale-$4,000(W/Scope) $2,800(Rifle Only W/ mags and parts)

Rifle shoots great especially when tuned for that specific lot. Groups below are with Sk Rifle Match @ 50yds. Previous owner stated that Lapua Center X is what this rifle really loves.

Rifle has been used in monthly matches as well as NRLX matches. Barrel does show some scuff marks as well as the foundation stock,

I'm in N. GA and will do Face to Face meets. Also will ship FFL-FFL but trader pays for shipping their own rifle and I will pay for mine. Paypal G&S(buyer pays fees) or Venmo

Built this to launch subs at a stupid distance with N110 (mission accomplished). It only has 100 rounds through it and I don't have time to continue the project with the new baby.

Had no issues shooting sub MOA groups at 50yds and 100yds.

Noveske 300Blk 12.5" Crusader Barrel 1:7T
BCM thermo fit upper
BCM QRF 10" rail
Midwest BCG
BCM Ambi gunfighter charging handle
Arisaka hand stop

Scope, Kiji, and muzzle brake not included.

SOLD

WTS Vortex Razor Gen II 4.5-27 MRAD Scope. Illuminated EBR-7C MRAD Reticle. Has a few scratches here and there but glass is clean. Comes with sunshade, box, and athlon rings.

Reduced- $1,475
$1500 shipped insured. Thanks

I have a brand new Warne Skyline Pro Bipod with precision legs for sale. I decided to sell cause I need a double pull with more height. Asking $350 shipped

I am looking to purchase a couple more suppressors and I am considering the purchase of the 1.375” hub mount versions. If given the option, which hub/muzzle brake interface do you recommend. I will be using them on a large frame AR, small frame AR and potentially a bolt action.

I see the silencerco, griffin and deadair systems but I am not sure what else is out there.

Any recommendations?

So perhaps the biggest problem with the FART Lite is it's REALLY bad with low volumes of cases, they'll just roll around on the bottom motionless.

So I made a template for you guys to make your own agitators. Just cut it out and it fits perfectly, did all the hard work for ya

Simply open the "FART Lite Agitator.pdf" in Google Chrome > Set Print Scale (100% or Fit to Paper) > Print. Then check your dimensions match what they're supposed to be. Next cut the paper along the lines, tape it down to a cheap 1/8" thick plastic cutting board or plastic cafeteria tray, use a sharpie to leave the "shadow" from the paper on the plastic, remove paper, cut plastic with saw, file if necessary. Heat middle of the H with hair dryer so it can fit in the drum, then it should snap into the diagonals of the hexagonal drum. JB Weld Marine Epoxy not necessary, but you could add it.

I used high tech 3D mapping (playdough) to map the inside of the drum and make the little roller grooves a "perfect" fit. I am going to continue refining the template and try to get it actually perfect though.

I hope this helps some of you, and many more of you who stumble upon this thread from a google search

Video w/ 30 cases .223 REM:
Login to view embedded media

I uploaded a picture of the target I shot for a OCW test. I'm having a bit of an issue deciding on where my ideal charge weight would be. I'm shooting 165 Game Kings, IMR 4895, Hornady Sorted brass, federal match primers, Remington LTR 308 rifle. What charge weight would you guys go with?

Hello all!
Moving some scopes around...
-Swarovski z6i with the BTR reticle and reptilia mount, no box
1300 shipped CONUS
-Delta Stryker hd 3.5-21x44 with the DPRC-1 MRAD reticle, with box- 1300 shipped CONUS
-Burris xtr3 3.8-18 with the SCR 2- MIL reticle, with box -850 shipped CONUS
All in good to great shape, everything works.
Check/M.O., PP F&F or G&S, you pay the fee.
DM me any questions, happy
to chat, send more pics, whatever!

Qty. 1 SG Timer 2 - $250 shipped
Qty. 2 SG Timer Go with quick release and pocket clip - $135 shipped each

These are all NIB.

Used Glock 22. Good condition, no visible wear, etc. Includes original case, 3 mags, Bladetech paddle holster, and Fobus mag carrier.

$350 shipped from my FFL to yours. Normal shipping exclusions apply for 2A-unfriendly states/areas. No trades.

PM if interested, no posts due to scammers.

SOLD Vortex Cert 30% off at EuroOptic. Expires 2/28/25. Asking $85.

Up for sale is a trigger cam used for 1 project. Great condition in original box.

$475 shipped obo

Chris

Hello from the Colorado Springs area! I've been a longtime lurker here and finally got an account setup, with my brother getting my into long range! I finally pulled the reloading gear back out after it sat boxed up for way too many years.

Current setups for longer range shooting:
Bergara HMR Carbon Wilderness in 6.5cm
Steiner T6Xi 5-30x56
APF 30cal Ti Suppressor
bipod - looking (was using one of my brothers ckye-pods)

6x45 AR - self built
18" barrel w/SA adjustable gas block
Vortex Venom 3-15x44

Remington Model 7 in 300 SAUM
Nikon scope
sub 7lbs - elk gun

I got my 6.5 setup this past weekend and with a good spotter/tools we had it shooting 1200 yards in the first dozen shots - always fun to get some distance! Looking forward to the rattlesnake butte shoot in April 2025!