selling a ZCO 36mm Block Mount 20MOA, barely used. Comes with box and leveling tool. $225 shipped.

I have a like new vortex razor gen2 4.5-27 ebr7-c like new I barely used it. Comes with original box and all accessories. Asking 1300 includes shipping. I will accept PayPal and Venmo.

Just got some and want to start using. After seating the bullet do you just wipe the case off with a rag?

First post.
Just purchased a new LMT MARS-H 7.62 PISTON, MLKMWS16PS-MARS. Will be scoping within a couple weeks. No need for a can (for now).
I'll be shooting out to 400 yards (max); coyotes, large racoons, & the like. I'll try different ammo manufactures/ grain weights, but I'm learning that 168 grain may be the rifle's preference. Looks like 175 gr. may be an option too.
I would appreciate feedback from someone that has this exact rifle and can comment on ammo preference.

Thank you.

Nightforce ATACR 4-16x42mm F1 Riflescope ZeroHold
.1 Mil-Radian Capped Windage DigIllum 12 Mil PTL Mil-XT C615
Excellent+ condition
Retail $2500
Sale price $1800



Also available
Nightforce X-Treme Duty 34mm 1.54" 20 MOA
Dark Earth Ultramount A683
Retail $325
Sale price $225

I bought this ADM upper in June, 2024, have payment receipt for $1700 from Copper Custom Armament. Added a Noveske KX-5 . Not going to use it now so offering at a great price. $985 shipped. This upper fits SR-25 pattern lowers and pictured below shows it on a Gen3 Noveske lower. ADM uses stainless steel Criterion barrels on their uppers. Condition is like new/unused. PP F&F

Trijicon RMR HRS Type 2 Reflex Red Dot Sight
Adjustable LED 3.25 MOA Red Dot Hard Anodized Coyote Brown
Excellent+ condition
Retail $549
Sale price $400

Sold the rifle this was on. ZCO 5-27 15mil, locking turret, Impact 3 reticle .
Spuhr 6602.
It has few imperfections around the objective, but the glass looks good. No box.
Scope and mount $3000 shipped. Firm on price, no trades

I am heading to Kodiak Island the end of the month to hunt with my son who lives there. I'm flying with a rifle/scope combo worth 2500+, my 10mm pistol, ammo, and knives in a Pelican case. I would like to put a GPS tracker inside the case but am not sure which if any will be usable being inside the Pelican. Anyone here have any knowledge about these things? I don't want it on the outside of the case where a thief could just rip it off and toss it.

Looking for a lightweight action for my next build, I think I’ve got it narrowed down between the Nanook and anTiX. I’ve never shot either of those exact actions but I’ve liked Defiance and Kelbly actions in the past. Will be in a MDT HNT26 long action, 7prc build. I’d love to hear yalls personal experiences with those actions or any that I might be overlooking.

Just to clarify this will primarily be my pack hunting rifle. I’m sure I’ll try to ring some long steel with it at some point but I have other heavier rifles more suited to that purpose.

Login to view embedded media
Just got the BCA-10 in. They offer lots of different models, including side chargers, but I went with the standard charging handle setup in order to use a Bootleg adjustable carrier (more on that in a minute). This is my first AR-10, so I won’t pretend to be an expert.

The furniture is very basic: M4 waffle stock, A2 grip, and a simple clamp-on free-float mlok rail. Mine has a 16” barrel, and uses the shorty AR-10 buffers for carbine stocks. In stock configuration it’s overgassed without adding a can, so we’ll test a few rounds as-is with the can before going to the Bootleg carrier. I also have a Kyntec buffer on the way, so I’m interested to see how that does as well.

The bolt catch was very hard to get working, as the BCG didn’t want to go back far enough—last round bolt hold open also wasn’t happening. It seems to have broken in a little bit, so I’ll update as I go. Accuracy is also TBD; I’d be happy with sub 2 MOA. The Venezuelan 144gr surplus was like 4-5 MOA, but I obviously won’t hold that against the rifle. I’ve got it setup in a DMR type configuration currently, with a PST 1-4 and SCRS on top. The jury is still out, obviously, but hopefully this thing runs okay and can be a decent budget option for $530 or so.

Vortex Strike Eagle 3-18x44 with the EBR-7C reticle. Scope is in like new condition.
$500 shipped

PLEASE NO TRADES OR OFFERS, I WILL DROP THE PRICE OR KEEP THE ACTION IF IT HAS NOT SOLD WITHIN A FEW WEEKS.

unfired, may have marks from handling/storage. 308 bolt face and creedmoor length bolt stop. $600 shipped usps insured from private party to your FFL.

I’m sure this has been asked a million times but I’m going at the question from a different angle. I just competed in my first prs match this weekend and it was a blast and now I got the itch for a specific use rifle. The rifle I used is my main hunting rifle which is a 6.5prc tikka chopped to 22”, silencerco scythe, 3-12 lrhs , and a stockys vg stock. I shot middle of the pack which I was fairly proud of have never done anything like this but I could definitely tell the recoil was not helping me.
I also don’t want to roast the barrel out of my hunting rifle.

Seems like the default recommendation most make is to get a 6.5 creedmoor when beginning PRS and I’ve got a tikka 24” ctr sitting in my shopping cart ready to check out. My question is will 6.5 creedmoor be enough of a step down in recoil to justify a whole other rifle or should I just got full out and have a 6 dasher or gt spun up?

I should also add I’m in northwestern Montana so the rifle most likely will have to fight decent amount of wind and the shoot I went to this weekend ranged for 200yds to 1430yds.

Have 115 brass cases of once fired 6mm arc. All fired from my seekins dmr rifle. Most of it is Hornady, a few starline from the hsm ammo. $35 shipped

Want to move a Thunderbeast 50% suppressor certificate

The Harris campaign and allied groups burned more than $2.185 billion trying to prevent former President Donald Trump from completing the greatest comeback in American political history, according to Open Secrets.


The Democrats’ losing effort comes even though the Harris campaign outraised the Trump campaign. From January 2023 to Oct. 16, 2024, the Harris campaign raised $997.2 million, while the Trump campaign raised $388 million.
The vast sum of spending does not include millions of dollars invested in smaller amounts by Democrat-allied organizations. The top organizations that spent $2.185 billion include:

• Harris for President: $875 million
• Future Forward: $621 million
• DNC: $368 million
• Harris Victory Fund: $321 million

Forbes outlined the Democrats’ spending:

The Harris campaign raised $97.2 million in the first half of October alone, while the Trump campaign raised only $16.2 million, after Harris shook up what was previously a more evenly matched cash race (Biden and Trump had raised $284.1 million and $217.2 million in total as of the end of June, respectively).
The Harris Victory Fund—which raises money for both Harris’ campaign and Democratic groups—raised $1.2 billion this election cycle, according to a FEC filing released on Oct. 24.

Click to expand...

In the end, the Harris campaign and allied groups spent more than $2.185 billion trying to prevent former President Donald Trump from completing the greatest comeback in American political history, Bloomberg reported using Open Secrets data.

As close to NIB as it gets. Got them partially to try out and partially for my dad to use on a 1st season CO hunt. Hunt was a big bust lol, so these saw almost no field use. Really great bino's, but my needs are really more competition based so moving on to try either the sigs or the Vectronix ones.

Comes with everything included new from Gunwerks and the Kuiu Pro Bino Harness in Ash.

F2F in Denver area is always my preference, but will do venmo F&F and ship insured.

$2,000

FS is an excellent condition HS precision Remington 700 LA stock black w/ green web (5r take off). Will come with stainless bottom metal and internal box as well as hardware . The barrel channel has been shaped to accept up to proof sendero/ m24 MTU contour barrels. 260$ tyd

I know I am not the only one but man I got the itch to build another upper. WOA 20" varmint barrel is calling my name. I know I should learn my 16" WOA spr upper but man those velocities are calling to me lol. Anyone own one other the TR Mlok handgaurds that use there special barrel nut wrench thats 50$. I know you can you a strap wrench for but it almost seems a Geissele wrench might work with some mods to it. Maybe after a few neat pours of eagle rare . will say the hell with it and complete the purchase.

Sold the rifle. Trigger has zero rounds on it.

$60 shipped

Of course, its even better when its a one of a kind TK Custom S&W.

Its unbelieveable how much work Eli put into this revolver. There are no MIM parts left inside it.

Its a 3.5" magnaported 1978 Hwy Patrolman barrel.

The cylinder is from a S&W 327

The action....sweet baby potatoes.....the action is unreal. Its impossible to express how nice it is.

He built this off one of the Pro Series 627s.

Deep state POS needs a neck stretching.

Unconfirmed reports indicate FBI Director Christopher Wray will retire ahead of President Donald Trump’s inauguration. Many have speculated in recent days that he would be fired once Trump is back in the Oval Office. Wray was involved in multiple incidents that hampered the first Trump administration as well as efforts to assist the Democrats’ campaigns over the past four years.

Click to expand...

https://thelibertydaily.com/rats-retreat-rumors-say-fbi-director-christopher-wray/

I’m confused right now. Mounting a couple scopes using the Badger dead level, everything is level as it should be. Then mount it to a rifle and double check it with the flashlight/ plumb bob method and the reticle slightly canted. Checked a couple other scopes that were mounted the same way and they’re the exact same as the others, slightly canted to the right. Any ideas?

Leupold Mk5’s and Nightforce NXS if that matters.

Both the Hawk Hill and DRS data card are in fine shape.

Asking $199 shipped
* will not separate