For sale, Swarovski SLC 15x56 Binos
With Outdoorsman’s stud and tripod/arca adapter
Used but in great shape
$1,650 shipped

Thank you

For Sale

Rock Chucker Supreme Press​

New in box
$200 shipped

Barrel is chambered in 6cm 1-7-5 twist match chamber 24" threaded. Barrel has less than a 100 rounds on it. Will need a barrel nut. Asking $285 shipped pp ff ,venmo,zelle.

Geissele Superduty 5.56 14.5 DDC, Huxwrx flash hider. Factory built, but i swapped safeties to radian talon, Grip to Magpul K2, Stock to Magpul SL and added a JP ambi safety. Approx 40 rounds fired with Hornady Black 223 75gr and i was getting 1/2”-3/4” group with that ammo. Not sure what they do with these barrels, but it’s super accurate for what it is.

$1500 shipped to your FFL

Nightforce NX8 4-32x50, F1 with MOAR reticle and factory tenebraex caps; Glass is in perfect condition. Scope will be shipped as seen, no box or sunshade included.

Warne Maxima Scope Rings also included.

Asking 1650 shipped/insured ppff

34mm, 1.335” height, and 15 moa. Comes with a Griffin ceramic ball level.
$165tyd

Very limited run of these rifles. Sniper Country PX Remington 700P stainless 5R chambered in 308. 20” barrel threaded 5/8x24. Comes with 40x trigger, Badger scope base, and M24 trigger guard. Will also include original box tag. Round count is under 100 rounds. Barrel with come with original thread protector and not the suppressor adapter. A write up on the rifle here https://snipercountrypx.wordpress.c...-700-police-5r-stainless-exclusive-sku-86594/

$1400 shipped

I shot both these sessions using the same ammo on the same day but 40 mins apart. They are split because the Xero went to standby. Is there a way to combine them in the Xero app or device itself?

Thanks!

Looking to buy a Tubb trigger for rem 700.
Lh or RH.

Model RX1200i w/TBR
Used a half dozen times. Excellent condition, just never used after getting lrf binos. $Sold shipped conus. Not looking for any trades. Thanks.

have 2 of these for sale. one with the black bolt knob and one with the silver. not looking for any trades at the moment just looking for cash to fund another project.

accurized remington 700 short action
the receiver face has been turned true
threads have been cut concentric with the center of the raceway
lug abudtments have been turned true
bolt has been threaded for tactical bolt knob
egw 20moa rail installed
bolt handle was blended and refinished

$700 each shipped FFL to FFL. I CAN ONLY ACCEPT ZELLE, CASH APP, USPS MO, CERT CHECK

Login to view embedded media
And this guy knows how to deal with him .

But because of technicality he got his job back at arbitration after 3rd firing for drinking on duty . This is fucking unbelievable even by pig standards.

3rs firing for coming to crime scene drunk was just months ago . This same channel covered the incident.

I wasn't able to find anything, so thought I'd ask.

I'm a big fan of the AR platform and have a few. On one of my rigs, I run a 1-8x NX8. This is a short scope, with a relatively short eye relief. For me, I do not require my mount to be cantilevered to put the scope where I need it to be, so I went with some American Rifle Company rings mounted directly to the upper receiver.

With scopes that I have mounted in one piece mounts, I just swap optics among my rigs as the need arises. Is this a smart thing to do with the rings set up? That is, just loosening the rings from the receiver with the scope still attached and moving the setup to another rifle without repeating the mounting process.

For that matter, since I'm asking, is it a smart thing to do with a one piece mount?

Due to popular request from folks that missed out or just wanted even more, we're making our most popular bundle available again:

500 New pieces of primed 357 Mag brass (made by Starline, Norma HS)

500 New MFS 38 cal 158gr JHP bullets

We are all out of cans so we dropped the price on this one to $125 + free shipping.

We still have a few other really great priced bundles in stock here

Don't miss the best price going on new 30 cal 220gr Subs @ 19.9 cpp: https://ravenrocksprecision.com/30-...ith-cannelure-300-blackout-subsonic-updating/

Our 9mm 94gr MIL/LE Frangible bullets are still $47 / 1,000. These are extremely popular, getting lots of 5 star reviews and are the best priced new 9mm bullet on the internet:

"This is my second order of 2k. Loaded up about 2k and have shot around 500 rds. A lite recoiling very fun bullet to use. Relatively immune to rough handling. Easily to load on a progressive press. Leaves very little bore fouling (unlike other frangible bullets I've used). Will be buying more as needed."

"I have ordered 14,000 of these so far. Need I say more? For those of you using bullet feeders they work just great."

https://ravenrocksprecision.com/9mm-94gr-mil-le-frangible-bullets-1000-ct-updating/

Vortex Razor LHT 4.5-22x50 with the XLR-2 illuminated reticle (MRAD). Scope is in new condition, glass is perfect, and all accessories are included in the factory packaging. SOLD

Cleanout for hopefully a move.

French Military Wine Container, 1955 & 1956 Vintage
1955 & 1956 dated vintage French Military Wine Container. The container is steel not aluminum, inside is lined with some type of coating. The can is stamped SM and VIN (wine) and a guess it is about 2-2.5 gallon capacity (THIS IS A GUESS ONLY, not measured). The can has some type of spout or aerator(??) not sure what it is but was inside the can on a thin cloth strap. The tube unscrews from the end and has small holes in the tube part. This is a great item for your Viet Nam collection. These came from the estate of a RAVEN. Yes there is some surface rusting but nothing that looks to be through the container.
$30 each + SHI. They weigh 7 pounds each w/o packing.

Wondering how it compares to the Super Yoter C

For sale is a Hawkins M5 DBM. Has a little bit of finish wear in the magwell, but no issues with it. Includes the long mag release and the short mag release. No action screws.

$140 shipped, Paypal F&F preferred.

I've been having a issue with my Aero Solus bolt dragging on my Magpul Pro700 chassis. The issue is that as I'm running my bolt the firing pin will rotate into the "fire" position protruding my firing pin and preventing a round to chamber. So far this has caused me a minimum of 4 stages between my last two matches. I am then forced to pull my bolt out on the clock and physically rotate my firing pin back into the proper position. I can never recreate the malfunction though and it only happens in the middle of a stage which is driving me nuts. Tried calling Aero but they only have the "chat with customer service" option which is another headache lol. Just seeing if anyone else is experiencing similar issues?

I need a HUX muzzle device for an HK91/G3 in M15x1 7.62.

I have cash and/or some HUX hiders and brakes for 5/8x24 I’d happily trade.

Ping me with what you gots?

Had this guy message me trying to sell me something that someone else had. Account even had feedback. Be careful and verify who your are speaking with. Reported them to the admins

Looking to move my Bartlein carbon 7mm blank. This is a standard SS blank (NOT Mod400 material). M24 profile, 27" length (made for 26" finish). RH twist, 5R rifling, slight gain to 1:8.25 twist.
$750 $650 tyd

Swarovski el range 10x42. Glass and body in excellent condition. Manufactured in 2023. Never taken in to the field. $2800 shipped conus. PayPal f&f only

I'm looking to build a lightweight 6.5 Creedmoor in an 18 inch barrel maximum size for a lightweight thermal hunting rig. After doing some research, there's not a lot out there. Seems like only thing I can find in stock is a Faxon, Rainier arms ultramatch mod 2 or a carbon fiber BSF. Was actually even considering the Faxon in a 16 inch. Gun is going to be used as a thermal hunting gun so I'd say the maximum distance is 400 yards and even that is unlikely. Just seems like my options are very limited. The Faxon reviews seemed to be mixed, not a lot on the Rainier and not a big fan of the BSF carbon fiber. I purchased a 6 mm Creedmoor BSF barrel and it gave me nothing but problems. Not really trying to do it on a budget either. If Proof had an 18 inch, I wouldn't even consider buying something else.

Anyone have any suggestions or can offer up some advice? I'll be hand loading for it and looking for something that just shoots. Don't know much about some of the barrel builder out there but I really prefer not to wait 6 months to a year for a barrel. Would even consider something used if it's a proven shooter.

LH Impact 737 Barreled Action 6 Dasher with 500 rounds on the barrel. 28 inch 1.25 straight taper with Kuhuna 3 port brake chamber by Alamo Precision with an Alpha Dasher reamer. Bartlein 5R 1/7.5 twist .154 freebore. Bix and Andy TacSport Pro trigger.

$1850 obo shipped to your FFL.