Posts

Overwatch260 · Aug 29, 2024

Up for grabs, like new Hoptic USA keymod 2 round quiver in FDE finish for .338 Lapua Magnum cartridges. Used a couple of range trips on my old AXMC as pictured, been sitting in the parts box for the last several years.

$50 shipped via USPS... PayPal, CashApp, Venmo accepted

KitShickers · Aug 31, 2024

I have 600 pieces of Hornady 6.5 Creedmoor range brass for sale. SOLD Shipped CONUS. Paypal FF or add 3.5%.

chadwickz71 · Apr 28, 2024

First build here so ignorant to some of this stuff so bare with me. rifle is for thermal hog hunting, already us some heavy 308s and want to try a ultralight 6.5 grendel. If all works well i'll basically give this to my 69yr old dad and build a second for myself as we would like to transition out of the heavy 308s.

6.5 grendel 12.5" 100% suppressed. Keep light/compact as possible

I'd like to stay as "top of the line" as possible, but some of these choices like the billet matched set are purely because they are in stock local for me in Dallas where i can also file my tax stamp for it being a SBR.

Noveske gen 4 matched set "in stock at Riflegear in dallas" but would entertain other options that are in stock i can get
JP lower parts kit
JP Full mass bolt carrier
What 6.5 grendel Bolt should i get ????????????
charge handle Noveske or radian both in stock at riflegear
Triggertech Trigger
JP JPSCS2-15H2 buffer system
Smoke composites buttstock (looking at short pull vs Rifle length) need some opinions here...
Smoke handguard "Need some help with what length im thinking 10" ????
smoke pistol grip "not sure if that saves much weight, maybe more for matching furniture than actual weight help"
Forward assist / dust cover "do i need this, looks like the Noveske comes with it ???
precision firearms barrel 12.5 bartlein/kreiger "can i get a way with a pencil profile here on the 12.5" figure i would talk to these people for advice
SLR adjustable block and gas tube, titanium Block
Should i go a ASR brake or direct mount to save weight?
I have omega 30s, and 36m suppressors with ASR brakes on my heavy guns and i like them but not a necessity.

Does this look pretty solid?
Need some opinions on this.... Can i save weight anywhere else that would mean a lot?
Durability of the Smoke furniture? ya'll have good luck with it,,,

Hoping LRRPF52 will circle by and check my parts, as i've been reading lots of his work with a 12.5" grendel, and lots why i wanted to go this route.

MacBSG · Aug 31, 2024

I’ve got a like new Send-it Level with vertical mount, works flawlessly.

$130 shipped PayPal FF

MacBSG · Aug 23, 2024

Hardly used SubSecond Operator 3.0 Belt. Size 34 in Ranger Green. Comes with pictures Shaw Concepts pouches and Safariland Holster Plate.

$130 shipped PayPal FF

Slate264 · Aug 31, 2024

Nightforce 40% off any product
Expires 03/23/2025
$350

PayPal f&f
Venmo

MtnGhost · Sep 20, 2023

Here's a size comparison of the two. I had always thought the Texan LSS was a broomstick length rifle, and I had similar reservations about the 700mm Panthera, but neither are bad at all!!

Turbwhistle · Aug 4, 2024

Looking to sell my ithica model 100 made by SKB, had 26” barrels one modified one improved. Has had a pachmayr recoil pad installed and a new green fiber optic front sight. Gun was used as a field gun so it has some scuffs and scratches, but has low round count and is tight. Made in Japan

Looking for $800 shipped sold!!

my ffl to yours. Payment via pp f&f

Scott Vandiver · Aug 19, 2024

I have a location were we can shoot at night. And we are planning a night shoot. I have done a few stages at night., but could use more, all targets are steel and will be inside 750 yards
I have shooting off jeep lights
Back lit targets
Front lit targets
Yellow strobe light
Road flares red light
Candle light
Any other ideas please chime in.

tomanyguns · Jul 11, 2024

This is a like new C570 ATACR 7-35 MIL-R F1. It has the box, sunshade and all the box bling. Asking $2500 (edited and changed here) shipped insured to your door.

Brushout · Aug 13, 2024

Looking for a PRI Mk12 MOD H upper or build kit. Prefer the kit….i have the rest of the parts. Black or FDE either one. Let me know what you have. PM me.

Thanks.

Olen_4504 · Aug 30, 2024

I have two scopes for sale:

Mark 5HD 5-25x56
Pr2 Reticle (mil)
Scope chap included
Hawkins rings included
(Slight rash on objective bell edge)
$1500 shipped SOLD

VX-5HD 3-15x44
CDS-ZL2 w/ HTMR reticle (mil)
Leupold rings included
$800 shipped. SOLD

PayPal FF or Venmo preferred

Can text more pics upon request.

Gunfighter14e2 · Aug 30, 2024

Login to view embedded media

Albrecht 65! · Aug 31, 2024

Used eberlestock g3 phantom .. great shape looks great

$350 shipped
Also have used eberlestock fac trac 285 shipped

Send pics on request

Malfieri · Aug 9, 2024

Manners short action pro hunter with mini chassis in high plains camo. Stock is brand new. Has only had an action mounted in it but never fired. Arca and picatinny rails have been professionally cerakoted in OD Green.
$1050 shipped

I also have a Hawkins M5 bottom metal that was cerakoted at the same time in OD Green available or a Hawkins M5 BDL bottom metal with extended Wyatt’s box and follower for saum based cartridges. This one is the Hawkins factory coating. $200 each

Albrecht 65! · Aug 31, 2024

Brand new up ranger tan color

$260 shipped

usafa77 · Aug 24, 2024

Great condition. Only used on a .22. Comes with box , factory throw lever, optional sunshade. Two flaws-small scratch on tube, silver sharpie mark on diopter. Glass is perfect. $1500 shipped, paypal or venmo.

9245 · Aug 28, 2024

I’m looking for a low cost chassis for a Howa 1500 build, I was looking at a short action, but now I am considering a long action and the one I was looking at (KRG Bravo) is not available for long actions, at least not according to the drop down menu on their website. Plus, it appears that the Bravo might have an issue holding zero if the back end is removed and reinstalled, which was the main selling point for me.

So what I am looking for is a chassis system similar in price to the KRG Bravo+the KRG tooless LOP, so $700ish or under, but preferably a lot less, this is intended for a budget build so $300-$500 is probably the sweet spot.

The only requirement is that it has a tooless LOP adjustment and tooless cheek riser (sorry I just don’t see stock spacers as valid in the 21st century, plus adjusting them on the fly is obviously not going to happen), or it is compatible with adding one later like the Bravo.

But ideally it should also be either removable/detachable without loss of zero or folding.

I’m aware of the MDT LSS, and that was my original plan, but by the time I add a pistol grip, folding stock adaptor, buffer tube, and stock it will be pushing $1,000, which is too much. I would prefer an all in one solution.

I also considered the Howa TSPX, but the lack of a tooless LOP or the ability to add one (at least not that I could see) turned me off.

Any suggestions?

If I must I will stick with the Bravo but it will make storage and transport an issue.

BuildingConceptsllc · Aug 29, 2024

This is a catch and release for me. I'd be happy to have a skmr3 with a center dot. I thought this would be fine on my AR but I need my center dot. I'd trade for a kahles with a skmr3 reticle or sell it.

Has box, Allen wrench, bikini cover as it comes.

Good shape, great scope. The sunshade stays with me though. Let me know if you want any detailed pics. There's a few very small little discoloration type marks on the bell on one side that are pictured. Glass is perfect and no other marks I know of. Overall really good shape.

$1600.00 shipped conus ( firm this is a good price I won't sell for less) I could add money for a zco or something that would be a good AR precision scope with a reticle similar to skmr3 or mpct3 too

DRWilson · Aug 12, 2024

I am selling a short action chassis from gorilla with a MDT skeleton Folder stock. I shot 20 rounds with this indoors on an 8.6blk setup that I am changing up. It’s OD Green Cerekote Finish. It looks brand new. Selling for $700. Thank you!

JBSTRD · Aug 31, 2024

I have two low round count (less than 100 rounds) Sig P365 barrels. One is the 3.1" and the other is the 3.7". Both are factory Sig barrels and they are in excellent condition. Come as pictured with no packaging.

Asking $85 each shipped or $160 shipped for both

Only trade I'm interested in is towards a P365X slide.

PayPal FF, Venmo, or Zelle preferred for payment

1791PrecisionArmory · Aug 31, 2024

Selling this builders set with a total of 50 rounds on it. Was used as a show piece for my Cerakote work at a gun show. Parting out the build.

Pictures show the whole rifle but what I am selling includes the following.

Aero precision M4A1 upper, lower, handguard 15" all parts and pins cerakoted in glock FDE, Magpul FDE pistol grip and charging handle. Also selling barrel and PRS Lite stock separately.

The barrel is a White Oak Armament Fluted 18" SPR barrel with a 223 CLE chamber if anyone is interested. Can Cerakote it a different color if wanted.

Please PM for any questions.

$300 shipped or make offer, would take trades for?

Thanks!

ironman56 · Aug 30, 2024

I had put together a cheap truck gun last week that I wouldn't lose too much sleep over if it turned up missing for whatever reason, PSA 11.5 upper in 5.56 ,so it's a pistol , already had a lower pistol in 300blkout so just robbed that lower for now . So went to the range yesterday to test it for function , no problems , probably 60rds down range , used a Vortex spark red dot , New out of the box ,zeroed no adjustment at 25yrds ,that never happens for me , so we back up to 100 yds and I can't believe how hard it is to focus on the red site- in target , but squeeze off 5 rounds and had to walk down range to ck target because I forgot my spotting scope ,damn 6 inch group 4 inch high and 3 inch right , now I can see why Crooks missed his kill shot , all those other bodies behind Trump would have been a big problem for him to focus on Trump , I ended up sticking a black shoot n see 6 inch target on the red site in target and adjusted the optic and was able to shrink the group to 3 inch at 100 after some practice , of course this is with a 11 .5 inch pistol and not a quality barrel , but it does have a jewel trigger. I doubt I would ever need to engage anyone at 100yrds with the gun , if I'm that far away I'll just get away but it's nice to know you can if you have to .

jzerfoss · Aug 29, 2024

Otter Creek Labs finally put out their OCM/AEM HUB Reflex adapter. Let's you use most if not all HUB mount suppressors on rifles setup for OCM5/AEM5 suppressors. If you want one you might wanna hurry up there's only 28 left. Here's the link https://ottercreeklabs.com/product/ops-ae-oc-hub-reflex-adapter/

abn_surfer · Aug 31, 2024

Has anyone done the AI AT thumbhole stock swap to the Accuracy International AT Rifle AX Buttstock Conversion? What do I need to know, and what tools are a must have prior to taking on this project? Or, would it be best to send it off to be done professionally.

Thanks, y’all for your time.

Having trouble using the site?

Posts

Posts

Filter

SOLD Hoptic .338 LM quiver FDE

Attachments

SOLD Hornady 6.5 Creedmoor Brass

Attachments

SOLD MDT Send-it Level

SOLD SubSecond Operator 3.0 Belt Ranger Green $100 Shipped

SOLD Nightforce 40% Certificate

Attachments

SOLD Ithica SBK model 100 12ga sxs 26” barrels

Optics Nightforce C570 7-35 Mil-R ATACR F1

Attachments

Accessories WTB: PRI Mk12 build kit

SOLD VX-5HD 3-15x44 CDs-ZL2 HTMR with rings

Attachments

Accessories G3 phantom

SOLD Manners SA pro hunter mini chassis $950 shipped

Attachments

SOLD Eberlestock upranger

Optics WTS Zeiss LRP S3 4-25x50 MRAD sold

Attachments

Optics WTS: Kahles 624i - skmr2

Attachments

SOLD Gorilla 700 REM Short Action Chassis with MDT Folder

Attachments

SOLD ***Sold***P365 Barrels (3.1” and 3.7”)

SOLD AERO M4A1 BUILDERS SET MULTICAM

SOLD SoldP365 Barrels (3.1” and 3.7”)