Brake is barely used. 20 rounds through it. 5/8x24, 6.5. Set screws are unused in sealed package.

$125 now $115 shipped.

Iran targeting Bibi’s house was grave mistake!

Watch for mullahs to be turned into Doner Kebab next.

More likely stir fry. Very small parts!

No pissant little pager RDX charges this time…

Mullah butter on the menu!!

Just ‘sayin!!!

Probably a stretch , but I’d like to trade my scar 17 308 for a Accuracy International axsa in 308 or 6.5 creed. Preferably 6.5

Details scar 17,RCH, Belgium made. 13.7 barrel p/w dead air by dwilson, 1.45 jet, Geissele trigger, razor 1-10 mrad, cloud defensive light, bcm grip, pws rail.

Not really looking to sell it unless sold it as is. Has less than 800 rds through it.

Looking for some info on the CMMG Dissent 308 rifle with a 16" bbl. with the side charging handle.
Anyone have one? I'm thinking about picking one up and hoping I can gather more info good or bad before I do.
Thanks
kenner

So do Pablo hang himself?

Article is pretty vague…

Sirhr

PVA 26” MTU contour Osprey 6.5x47 prefit. Has 706 rounds fired, just going with a lighter build and don’t need this anymore. $325 shipped conus only no trades. Venmo or PayPal FF, add 3% for non FF.

Zero press with shell holders lock rings and wrench. $850 shipped in USA PayPal f&f, Venmo, or Zelle

Brand new VCOG 1-8x with the red tree reticle/larue mount. All new/factory with original included material and accesories.

$1900 shipped firm.

Victor Co Green skins are still available.

Skins— $90 $75 shipped

Selling a well loved AICS 1.5 R700 SA chassis.

Got it a while back in this condition.
-AICS 1.5 with Victor Co Skins.
-Evidence of being painted at some point (shown in pics), looks like he had the recoil lug slot opened up, and it was bedded to the Rem700 that I pulled out of it. — $SOLD shipped

Can include a basically new Atlas BT10-NC and the Atlas spigot mount, I think I’ve shot with it like 3 times. — $SOLD shipped

Chassis and bipod — $N/A shipped

No trades please

PP F&F or Zelle preferred, can discuss other methods or local deal in Treasure Valley ID metro area.

Near-new, excellent condition Manners PRS-TCS in Elite Tommy Bahama camo for R700 SA w/ mini-chassis, full arca rail with two forend weights, adjustable buttstock with spacers and one weight, Sikes Rail & Clutch, and adjustable cheek piece.

I added an Hoptic saddle blanket to the cheek piece, which can be removed. Feel free to PM with questions or if you’d like to talk/text over the phone.

$1500 shipped CONUS.

All,

I am working on a build base around the Terminus Zeus action.. I was seriously considering at the AT-XC over building one but have now changed my mind and want to do a ground up build. This rifle will be a "PRS" style rifle but I don't want it to be a full on gamer rifle, which is why I have excluded the MDT Elite.

AT-X - This is the current front runner.. but it doesn't have a good option for a solid thumb rest while maintaining folding capability and It is currently only offered in there annoying keyslot that has limited aftermarket support for PRS related items. The one thing I love about the AT-X is the full length top pic rail that is at the same elevation as action.. Vision appears to be off set.

Vison Pro - Appears to basically be an improved version of the AT-X Chassis. Has everything I mentioned above and currently has success in PRS.. BUT from some pictures I have seen, it looks like the chassis would prevent the quick change barrel feature of the ZEUS.. Kinda a deal breaker. AS mentioned above the action appears to sit low in the chassis which I know is a good thing but that throws off proper alignment when running clip on.

What are everyone's thoughts on these chassis?

Can anyone tell me what mount this is?

Brand new in box, never mounted Swarovski Z8i+ 1-8 with the BRT-I reticle and 34mm main tube. Comes with Ballistic turret.

Will be out of the competition shooting game for a while. Clearing out a few things in the safe I don’t use.

Bought this and only ran it for two nights during a coyote hunt.

Factory JP SCI-20
Proof Research Carbon 16” .223 Wylde Barrel
Full length top rail
Full length arca rail
Around 150-200 rounds through it.

$3200 shipped

If this is true the Labour Party plans to send some of their many shitbags here to campaign for Kackle Snatch & Tampon Tim

NIB, JV Innovations SBR Dovetail Adapter. This works with the InfiRay RH25/PFN640+ thermal to clip into the Wilcox Flip To Side mounts. These are sold out at the moment at the only US distributor. $120 shipped, no trades.

Like new only used 1 time.

$275 shipped ups ground

I am looking to get a pair of NL Pure 12x42 binos and would love to save money. I can get 10% off retail at Sportsman's Warehouse, but I would like to save more than that. If you have a valid Swarovski Certificate for a significant percent savings at a reasonable price please send me a PM and we can discuss. I could really use them for Elk season in November, so time is of the essence. Thanks!


Don't PM me if you don't have buy/sell privileges on SH and good feedback. I have not been scammed on here yet, and I don't intend to start, much appreciated.

Apparently, Badger is out of stock of the EFR if anyone has any, I'd take 10 to 15...

Thank you

Mike R.

Gen 2 vortex razor 4.5x27. It is an MOA reticle. Has some rubs on it from the safe. I tried to capture them in the pics. $1450 shipped

I recently purchased a Zeiss LRP S5 5 X 25 scope. Really happy with the scope, great glass, love the turrets and reticle. However, after sighting the rifle in and setting the zero stop the elevation turret marks did not line up with the delta indicator. I contacted Zeiss and they had me send it in. They sent me a new scope with a turn around time of 8 days including shipping both ways. Excellent response time and communication throughout. I guess you can argue it probably shouldn’t have shipped like that, but they certainly took care of the issue very quickly.

Here is a short one with them running a 308 Win at 1150 but they do a lot of 2000-3000 yards videos as well.

Login to view embedded media

I have a pile of CFE 223 and just got a bunch of the 73's. Been trying them in a new barrel and getting pretty horrible groups. I'm going to try some Hornady factory match and factory 55gr VMax ammo (has traditionally both shot very well for me) and see if it's the barrel or the bullet/powder. I had some leftover 75gr HPBT loads that shot 1.25-1.5" in my old barrel (10.5") @100yd. This barrel threw them around 3-4", so I'm kind of suspecting the barrel. ETA: New barrel is a Seekins Precision 16" 5r 1:8 twist.

In the mean time I'm curious to see if anyone else has had success with this bullet/powder combo. I'm not looking for gnat's ass, but if I could get 10 rounds under 1.25" @ 100yd I'd be very happy. Right now everything has been 1.75-3.5"

Hello to all!

I've some 2nd hand 6,5x47 Lapua brass that I received with my rifle, but I don't know how many reload was passed before I started to use this.

Now these cases show, at .200 line, measures greater that the standard SAAMI and measures obtained resizing the brass with a Forster FL Bushing die.
When, after FL resizing, I insert the brass on the chamber, close the bolt and after open the bolt whe have a click/clickering at the up of the bolt.

I read on the Net that the cause of the increasing of the quote at .200 line are a sign t'ha the brass are at end of is life, lost primers, head separation, bla bla bla...

Now I ask if are some remedy for this problem.
Ring die?
Small base body die?
Recicling bin?
Other?

Thanks, Camillo

Selling this brand new scope. Was going to put on an AR10 but decided to go another route. I removed the shrink wrap to check it out but never mounted on a rifle. Comes with all accessories in the box.

Looking for 400 shipped/insured USPS priority lower 48 states. Venmo/Paypal