Prices include shipping.

SP-4001 - 0 Left - $295 Each (SOLD)
• Tube Diameter: 34mm
• Height: 30mm (1.18”)
• Length: 151 mm/5.94
• Cant: 0 MIL/0 MOA
• Mounting System: Picatinny




SP-4006 - 1 - $295 Each
• Tube Diameter: 34mm
• Height: 34mm (1.35”)
• Length: 121 mm/4.76
• Cant: 0 MIL/0 MOA
• Mounting System: Picatinny





SP-4616 - 0 - $295 Each (SOLD)
• Tube Diameter: 34mm
• Height: 38mm (1.5”)
• Length: 150 mm/5.91”
• Cant: 6 MIL/20.6 MOA
• Mounting System: Picatinny




QDP-4046 - 1 - $350 Each
• Tube Diameter: 34mm
• Height: 34mm (1.35”)
• Length: 151 mm/5.94
• Cant: 0 MIL/0 MOA
• Mounting System: Cantilever Picatinny Throw Lever




These have been through a gun room move, so some of the product boxes might be a little scratch and dent, as shown in the pictures but not the mounts themselves of course.

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

I know this is a long shot, but I am looking to trade my low round count (<100) 14.5" Proof Carbon Fiber AR barrel that was LMT converted by D. Wilson for an 18" Proof Carbon Fiber AR barrel, either new/low round count unconverted or D. Wilson LMT converted. I am only willing to work with well established members with solid feedback.

Selling my backup tripod, Innorel RT90 with a Midwest adapter to take an Anvil 30. Rock solid setup even with a heavy rifle. $335 shipped pp ff

Used DI Precision Mark 5 Competition Wind Dial in Flat Black for $70 shipped

Selling an Eberlestock Bandit pack. Good condition. No issues. Was used for a short time but needed something bigger.

$100 shipped. PayPal FF preferred.

Is anybody using a shot timer when training? I’m thinking not of timed stages but using it more like a time standard for training purposes. I needed to get a shot timer for pistol anyway and was looking for feedback if anyone is using it this way. If so, are you using a specific timer or feature that I should be aware of since I don’t have much experience using a shot timer. TIA

Looking to see if anyone has a Zermatt Action wrench before I buy a third-party one off eBay since they're sold out everywhere, just checking here.

Thanks!

Login to view embedded media
Yep a Quaker pulled over during a storm , decided to read a book. And the police were called , and once they realized the severity of his crimes - reading a book and heading to a religious retreat they went into beast mode and arrested him for public safety. Good work boys .

I totally get the concern that he had “stuff” in his car like a power cord . No telling the shenanigans he could get up to with a book and a power cord on top of being a Quaker

I have a fair bit of experience shooting suppressed, but until recently, I've never felt compelled to own a suppressor. I've always thought that shooting suppressed was more of a pain in the butt than it was worth.

I have, however, reached the point where I'm thinking that it doesn't make sense not to invest in a few. In any case, I have a couple of them coming. The big question that I have bouncing around in my head now is the attachment method.

It was my intention to just go direct thread, but the YHM srx system seems pretty cool. In my research, I've run across comments made by reviewers wherein they noted that the choice of mounting system can affect the sound of the report to the extent that it can make the difference between the report being painful to the ear and not.

Have any of you experienced this?

I've got a new set of boots, never worn. I ordered a 10.5 and got these but didn't notice they were the wrong size until well after the return date expired. I don't have the box anymore. I believe they are the Rivot 400G in coyote, but will confirm when I am home. They run around $400 new unless you have a coupon. Asking $150 shipped.

Moving a SFMB-556-1/2x28 that came off my 18" "SPR". Brake was used for about 800 rounds under a SF Mini but is is great overall condition. Asking $100 obo shipped.

The optic and QD were bought new and put together, mounted and then removed without being shot.
Optic has all original accessories including static mount
$400 tyd lower 48.

Moving a T6Xi 2.5-15x50 MRAD with the SCR Reticle. It was on a rifle for less than 200 rounds. Only removed, because I put a thermal on the rifle that this was on. In very excellent condition with clean lenses. Small stuff on battery cap and the faintest of ring marks from the Vortex Precision Mount it was in. Purchased directly from Steiner. Comes with all accessories and factory box. $1100 Shipped

I also have the Vortex 34mm 20MOA Mount with diving board and original ring cap. $200 Shipped

Please message me if there are any questions or additional photos are needed.

Have a set of the new NL Pure 14x52 binos, used once, in perfect like new condition. Asking $3150 shipped.

The owner of the rifle felt it wasn’t shooting good enough. He thinks the steel isn’t good. So, he decided to make his own bushing and put it on a cleaning rod and push it down the bore to check the barrel. He feels there are tight spots in it. I’ll guarantee you that he scored the tops of the lands. Barrel is guaranteed junk now.
Any lint, dirt, carbon particles etc.... will get forced between the slug and the bore and your going to do damage. Worse yet.... a steel bushing was made and to what spec it was made to and your pushing it down the bore. Nothing but a disaster here.

Nothing in his email about how he’s cleaning it, how many rounds on it… how it’s shooting etc… not to mention what the diameter/spec he made his custom steel bushing to in order to check the bore.

Yes.... No warranty being given.

I'm refraining from using very choice words right now!

Hornady .257 134 ELDM - $180/500 or $350/1000

Berger .257 135 LRHT - $280/500 or $550/1000

RRS SC ARC lever clamp
Has R Loc components removed, but will include the parts and will reinstall before shipping if you want.
Asking $140 shipped

Bix n Andy TacSport Pro X - Movember edition (purple anodize instead of blue)
Single stage, gator shoe, RH safety
Includes bolt release plate (not shown)
Asking $250 shipped - SOLD

2X Triggertech Diamond pro curve shoe with a RH safety Both used for about a season each (~1k-1500 rounds)
Asking $230 shipped CONUS

I am looking for inexpensive but effective camo pants and jacket that are designed to wear over clothes. I am thinking something like a leafy suit or the mesh base to it. I prefer the mesh style vs the leafy style because I have ordered a few inexpensive leafy suits and the materials used in the leaf part has been shiny / reflective. I would like to keep the cost down as this is not going to be my primary hunting clothing. It needs to be light in weight and bulk to pack easily and well vented to stay cool. It will be used year round, so I prefer more grays, tans, & light browns vs deep greens. Thank you in advance.

Vortex Viper HD 3-15x44 mil scope and a qd 1.5” 30mm ADM mount. $650

Ended up with 2 scopes for a AR build. Don’t need both. Pricing is shipped to the lower 48.

Zelle or Venmo f&f only (no comments please.) I don't have PayPal.

Selling an iRay RICO BRAVO 384 35mm Thermal Weapon Sight. It was purchased December 2023, it still has approx 4 years of warranty left. It was used less than 3 hours. It’s in excellent condition and functions perfectly.

$2,400 obo shipped & insured.

The link below has more details of the specs/features.

Located in Cheyenne. Can meet up to the Loveland, CO area for powder/primers.

Powder
Varget 4 - 1# and 1 - 10ish oz $50/lb $220 for all of it
H4350 4 - 1# $50/lb
H1000 4 - 1# $50/lb
Retumbo - 1/2# $20
Hybrid 100V 2 - 1# $40/lb
Staball Match 1 - 1# $50/lb
Ramshot Hunter 3 - 1# $30/lb
Norma MRP 1 - 1# $40/lb
RL19 2 - 1# $60/lb
RL17 1 - 5# $260
RL25 1 - 1# $60/lb
RL10x 1 - 1/2# $25
H4895 8lb jug weighs 6 lbs $250
CFE BLK 1 - 1# and 1 - 14ish oz $80 for all of it
CFE 223 1 - 1# $40/lb
H110 1 - 1# $40/lb
Accurate #9 - 1# $40

Primers
GM210M 2500 - $260
CCI 41 2500 - $250
CCI 450 2900 - $250
Winchester LRP 300 - $15
Winchester WLR 400 - $25

Bullets
.264 143 eldx 300 - $120
.284 139 LRX 50 - $40
.284 145 LRX 50 - $40
.308 165 Trophy Bonded Tip -
.308 175 LRX 100 - $80
.308 130 TTSX 200 - $140
.308 150 TTSX 200 - $35
.308 165 accubond pulled 320 - $150 SPF

Well taken care of Zeiss LRP S5 5-25x56 Mill. Sunshade and throw lever included. Scope caps have a cutout in them for the Sendit level ocular.

$2250 shipped and insured.

Scope rings are not included

Looking for a foundation MG2 or exodus / Hawkins m5 for a Rimx build. (Preferably dark distressed or black)

Would also consider centurion or other models, and opening up the inlet on an impact stock to work with both.

Third option, what cheap stock/chassis options do you have, for a steal, while I wait on a new Foundation build.

Stuart