Satan worshiper in SC ate ears and drank blood per instructions from his alter ego “Robert Baldwin”


Solution:

Magnification: 6.5-20x

Parallax Setting: 50 yards to infinity

Focal plane: Second Focal Plane

Tube Size: 30mm

Reticle: Dead Hold BDC

Objective lens: 44mm

$250

Not sure if true or not.

See the video.

300, Once Fired 6.5 Creedmoor Brass, Large Rifle Primer, cleaned and annealed. $175 to your door.

The barreled action specs are as follows:

- 24 inch Proof 1 in 10 twist .308 Win Chambering (Approximately 300 rounds down the tube) with integral radial muzzle brake that is threaded as 5/8x24
- Terminus Apollot Lite/Ti left hand short action with 20 MOA rail
- Put together by The Gunsmith in Mesa, AZ

Asking: $2000 shipped

Trades: Long Action Terminus Mag Bolt Face, other long action left hand options?

Hi all new to the group.

I am finishing up a LMT MWS 308 build. I haven't really seen anyone doing something like this so figured I would see what the feedback was. I have a TA11 Acog with donut of death reticle, QD mounted and plan on using that for most things with this LMT. However I also have a bolt action Montana X2 and wanted to see if there was a way to share an optic with both my LMT and my Montana. In case I want to shoot further out with the LMT on the range.

I found a killer deal on a S&B Polar 96 2.5-10 with a Zeiss ZM rail mount. These are very common in Europe but never really caught on in the US, which I never understood. Great thing with this setup is no need for scope rings, so using pic rail mounts on my bolt action, I can swap between my LMT and Montana, without needing to change a thing with the scope mount. QD mount lines up perfectly on both platforms. I needed to get a cheek riser for the bolt action but I actually like it better that way anyways so it all worked out.

Only issue will be needed to zero the scope each time but I am curious to see how off it will actually be between the two.

Thoughts? Thanks!

SAC short comparator body and Hornady Anvil with 3 bullet comparators and 3 headspace comparators.

Bullet: 6mm, 6.5mm, and 7mm
Headspace: 6mm/30 degree, 6.5/30 degree, and 7mm/30 degree

$150 shipped for all

First off I would like to thank sniperhide for accepting me into the website
I’m looking forward to the great discussions on different topics and also a bit of craic
Here all the way from west of Ireland

3 unopened boxes, all the same lot. $150 shipped. No trades.

SOLD

Cert is good for a year. $300 PayPal f&f. I can ship it to you or give you the numbers off of it.

There are threads with folks asking, "What optic for 300 yards?" or "what optic do you recommend for under $X?"

I am asking something different.

What optic are you running on your rimfire, and, more importantly, why?

I am hoping for a lot of responses giving a wide variation of scopes for rimfire use and their various features that you find useful. Hopefully, you can add one or two things you do not like about the optic, too.

This can be a good reference for others in the future trying to decide on a rimfire optic.

Selling like new trijicon mro 2.0 moa red dot with full co witness rail mount. Was put on rifle to zero but never used. $380 shipped

Login to view embedded media
A professional seeming cop, takes what he thinks is meth- cause a junkie told him- takes it back to department and smokes it in the fucking bathroom - at work, a police station and the only reason he’s still among the living is they had NarCan. Stupid fuck smoked fentanyl thinking it was his usual daily dose of free meth.

For sale is an Area 419 Sidewinder muzzle brake in stainless. .30 caliber. 5/8x24 adapter included.

SOLD $125 shipped Paypal F&F

I have a dark distressed foundation MG2 cut for an impact action and Hawkins m5 bottom metal. Used in one PRS match. With my hand size, I think the MG2 trigger reach is a little too far, and I’d like to try the centurion.

Would sell for $1075 OBO. Also willing to trade, let me know what you’ve got.

Cleaning out some stuff. All prices are shipped. Combine things and save on shipping.

Willaims FP Peep Sight for Marlin 336 - $60

Ranger Point Precision Marlin 1894 RHINO Scope Mount Rail - $25

Skinner Sights Marlin 1894 "EXPRESS" Sight - $65

35 Remington reloading Dies $40 spf
RCBS 16501 - FL Size & Seat
Lee Crimp
Lee Trim & pilot
Hornady 35 rem modified case

97 pieces of assorted deprimed R.P. stamped 35 Remington Brass (assorted free bullets) $65 spf

Nightforce Rem 700 SA - 0MOA sold

Vortex 34mm Bubble level - sold

Bullets
ELD's -SOLD
170 .264 Hornady ELD 147gr
37 .264 Pulled - Hornady ELD 147gr

Assorted 6.5 bullets $50
100 .264 Hornady InterLock 129gr SP
100 .264 Speer TNT 90gr HP
78 .264 Hornady SST 129gr
28 .264 Berger Hybrid Target 140gr

.

Reposted with all the pictures

I need a LPVO with daylight bright illumination and uncapped turrets... I've kinda narrowed it down to an NX8 or a March shorty.
Anybody played with them both, especially side by side, is the March worth the price difference

Brand new Area 419 master funnel kit!
This includes the standard heads no extras!
Never used it's a extra I don't need.

$100 I can cover PayPal Fees.
I'll take care if shipping CONUS only.
PayPal or Venmo

I will not be able to ship 3/17 thru 3/21 sorry!

This isn’t a which one is better post I truly like both stock/chassis more of some advice on a build I have going on.

I currently have a bergara b14r in a mpa ba comp chassis and it is very nice and very adjustable which is a good thing as my daughter shooting with me and I’m 6’4 and she’s not quiet 5’ so there’s a huge LOP difference lol the new barreled action will be in 6.5 creedmoor that she will also shoot. I recently got to shoot a 6 dasher in a foundation and REALLY liked that stock.

Option 1: Use the MPA chassis for both barreled actions and just swap them out as needed when we shoot. We definitely will shoot the .22lr more probably go threw 1000 rounds a week right now since the weather is nice.

Option 2: Put the 6.5 in the MPA chassis and order a cheaper stock for the .22lr like a krg bravo, mdt xrs etc.

Option 3: Leave the .22lr in the MPA and order a foundation for the 6.5 and have it setup with spacers so she can still shoot it will.

I think I like stocks more than chassis but the chassis just flat out work and work well and not to mention the adjustability, weight tuning etc is all super easy. Any advice is welcome.

Black Matrix Pro ambi for Rem 700 clones. Half a season of PRS. Comes with factory accessories, 5 internal Grey Ops weights and a full set of Grey Ops steel side weights.

$1150 shipped to lower 48. PayPal Friends and Family or you pick up fees.

Like new no box. One tiny mark. Fabulous trigger just dont have a gun to out it in. And trying to keep from buying one. 200 shipped. These are 300 triggers. This is the single stage model. Comes wint the shoe pictured

How can you determine what the FoV of a scope is — at magnifications other than the minimum and maximum values given in the manufacturer's specs?


Besides the obvious, of course :
"Buy the scope, set out a tape measure, record, caluclate — done."


➧ But, before I bite the bullet and type my CC number in the field.... — I'd like to know what FoV I can expect at different magnifications.

Because to me FoV is a big deal. To March it was so much that they developed their Wide Angle scopes.


Just to see what FoV are typical — I did a little survey of manufacturer published FoV (min. and max. magnification). The table below shows the data I found.

Matthias

Are there magnified optics without a fixed eye relief?


Sorry for flaunting my optics ignorance so unabashedly with this question.....


I love my red dots:
No matter where my eye is — sometimes 2 feet away from the optic, sometimes almost touching it — I always have a shot.

However, I'd like something with a little more magnification, even 2x or 3x would be great.

I understand that adding a magnifier will change my eye relief — and my unlimited-eye-relief red dot turns into a regular scope with a fixed eye relief of only a few inches.


➧ Is there anything out there that will do this trick?
➧ Or are we still waiting for that innovation?


Thanks!

Matthias

Hey guys, looking to trade 1,500 Berger 105’s for Berger 109’s. Let me know if you’d be interested in a swap.