I can't count the number of ways we are winning.

1. Throwing that utter POS Al Green out for being disrespectful was just awesome. I would have taken that gold headed cane and stuck it up his ass after beating him to a bloody pulp
2. Watching Pelosi not knowing what to do.
3. Watching the Democrats with their little protest signs. I bet David Hogg thought that up
4. DOGE!

List your favorites

I have been shooting a Bergara for NRL 22 and want to upgrade to a Vudoo eventually but don't want to spend that much at the moment.... So I was thinking I could buy the chassis now and use it for the B14 for now, then get a Vudoo Barreled action later.

Not sure if that's the best plan, but seems logical while sitting here with my 1st drink of the night..

I would like to know what more experienced shooters think and then which chassis... I was looking at MPA and MDT but don't have any experience with either but I really want to look cool, even if I don't hit anything.

Has anyone reloaded using 308 federal gold medal brass? I have access to an absolute ton of it from work (swat sniper team). It doesn’t appear to be crimped either.

Anyone with experience reloading it? Worth it or no? I don’t have a 308 barrel, but I’m debating it just to use this brass.

Gee I guess if it was actually housing migrants it would have been totes worth it

Login to view embedded media

Looking to sell my zero compromise 527 with mpct2 reticle, scope has 15mil locking turrets, comes in hawkins heavy tac rings 1” height, it is wrapped with black multicam ranger wrap, and has objective and ocular tenebraex caps. The scope is in great condition, aside from some scuffs on the windage turret, which is only cosmetic, and does not affect performance. Glass is mint.

Looking for $3500 for everything or $3300 for scope without rings. Price is shipped and insured, payment via paypal f&f


Sold!

Looking to sell my XLR TR-2 buttstock with bag rider, this is basically brand new, length of pull from 12”-15”.

Looking for $250 shipped payment via paypal f&f or zelle.
Sold!

I have a left handed zermatt origin action, proof s.s. pre-fit in 6.5cm, Triggertech special trigger, acc elite chassis. Oss 7.62 hx qd suppressor. Using hornady 140gr match, h4350 (39.8gr) so not a high velocity load (2720s), cci #200, alpha ocd LRP brass about .002" shoulder bump. I will randomly get heavy bolt lift and when I do the neck of the brass extracts dented in. Thats with slow extraction so the denting is happening during initial bolt lift or during chambering but I've sat there and cycled loaded rds a ton and they never have issues so im thinking it's happening during bolt lift or something. I can't figure out what's causing the bolt lift problems with no where near signs of pressure. Ive cleaned the chamber really good and it'll be fine for a bit then it'll start happening randomly again but it'll be like one round then no issues then another random rd with heavy bolt lift. Anyone have an idea what would cause this. I just purchased a borescope and it'll be here in a day but I dont think there's anything in the chamber bc its random rounds then it'll extract fine. Yesterday I took my rifle apart so I could see in the barrel and there's wasn't anything wrong with it. I cleaned it really well and rebuild my rufle and it happened again today with random flyers. It just started and wasn't doing this until yesterday. Itll do it even with a clean barrel and like 10 rds through it. Help would be greatly appreciated.
Thanks.

Steel B14R

Modified stock from previous owner. I added the marine Tex and rattle can. It's green underneath.

Triggertech Special

Bergara scope base

2 mags

Caldwell bipod(I think)

$950 shipped to lower 48

Selling my Vortex AMG in MOA. I would describe it as good condition and the lenses are pristine. It shows signs of typical wear (faint ring marks, etc) but it did just get back from Vortex HQ for a deep cleaning. Comes with everything that came in the original box except for the Objective flip cap. Not a clue where that thing went.

$1500 TYD

Apologies in advance if this is common knowledge, but I can't seem to find it anywhere in the CDG discussions.

As a lifetime reloader, I have always been using bolt lift effort and ejector swipe marks (on the case head) as early pressure indicators when working up new loads.

Does the pivoting handle and mechanical ejector (lesser so) of the CDG action prevent me from using these methods, or are there still other obvious indicators regardless of these novel design changes?

Inquiring purchaser wants to know . . .

Thanks

Schmidt Bender 5-25x56, H2CMR reticle w/illum, DTii MTC locking turrets (Mils), excellent condition glass & function. No idea where the box is, so the ARC 32mm rings, MKM level, BC caps, and sweet ass paint job convey with it. $2200 shipped, PPFF or Zelle preferred.

Partial trades (only):
MCS-PPF LA
Leica 50210

Full trades (only):
Trijicon TARS

Manners Compact Stock in 700 SA. Mini chassis, Salmon River Arca/Pic, tab bedded (for Rem 700), cheek cushion, bloodshot color. Mag with color match base included. $old shipped, PPFF or Zelle preferred.

Great condition going a different route.

CTR bottom metal included. Uses CTR mags ONLY

Price $550 shipped firm

As the title says buying a K1, preferable factory upper.

Been a lurker for a while but made an account specifically for the classifieds.

Looking for an xlr.

Do lots of hunting and uspsa and idpa.

Looking to start rifle compititions this year.

--Cam C

Sold my edge and have no use for the rounds anymore so I pulled them.

99 pcs of once fired adg brass(all annealed)
73 are primed 26 are not

$150 shipped

125 Berger 300gr OTM bullets
48 new & 77pulled with light marks (see pictures

$110 shipped

Have a Blackout Defense Keymo Hybrid Brake and Flash Hider, Raw Heat Treated finish. Both NIB. Bought for a build I never completed. Unopened. 1/2-28 threads. $100 each.

I have 2 used Comp barrels I am not going to be shooting. I shoot more Rimfire than I do Centerfire. Barrels have been in the drawer for almost a year.

1st barrel is a TL3 6mm ARC cut and spun by Desert Precision. I believe it is a Douglass Blank. Barrel is 26” long and Comp Contour. Threaded 5/8-24. EC Tuner Brake, PPC Bolt Head and HLR Recoil lug for Origin Action. Barrel has 500-600 rounds on it.
* Barrel $450 Shipped, Add Bolt Head $100, ADD Recoil Lug $25. SOLD
*** Recoil Lug and bolt head are not available to purchase individually.

2nd Barrel is a Origin 6mm Creed cut and spun by Altus. It is 26” Comp Contour. Threaded 5/8-24. Barrel has less than 400 rounds on it.
* Barrel $400 shipped

3rd Barrel is a NEW Proof Carbon 6mm ARC for TL3. Barrel is 20” long and NEVER BEEN SHOT. Threaded 5/8-24.
*Barrel is $850 shipped. Sold to @Five7guy as well as the recoil lug.


** All shipping will be UPS. All payments can be PayPal, Venmo or Apple Pay. Venmo or PayPal gift only or cover the 4% fees.

I’m willing to get you all the extra pictures you want if needed.

Up for sale is my Leupold Mark 4HD 6-24 with PR2-Mil reticle, was on my 6.5 Creed for one NRL Match. Comes with area 419 Hunt Scope Rings 1.18" Tall. $1150 Plus the ride

So I bought a impulse hog hunter off of gunbroker. I really only want the action. I'm gonna turn it into a 22 creed thermal gun. I found out that the "Hog hunter" version uses some proprietary mag and doesn't use AICS pattern like the impulse predator. Are ya kidding me? What "hog hunter" wants a 4 round mag? Anyway, my question is this: can you get "impulse predator" bottom metal? Or what should I do?

Less than 1000 rounds on it. Shoots 1/2moa. Was painted at one time but is 99.9% stripped and re oiled so it's not chalky.

$600 shipped to CONUS

Will upload pics tonight.

- TT Diamon Flat Shoe New - $240 - SOLD

- Spuhr Hawkhill DOPE card holder

Will work on the MPA mount also. Willing to trade for same Area419 card holder or sell - $75 - SOLD

- Spuhr 90° Sendit Level mount

This will also work on the MPA mount. $45 - SOLD

Will take Zelle, Venmo, PP. If you opt for PP and want GS, please add the 3.5% fee.

Like new action wrench for the 3 lug Curtis Axiom actions. $90 shipped, pp ff, check or m/o. No trades.