WTB Badger SA M5 bottom metal. Must be made by Badger.

Thanks

Cross-posting this from GAFS on Reddit:

Login to view embedded media
The items listed below are for sale, prices are shipped!

H&K MR556 stripped upper receiver, very good condition. - $380

Brownells BRN-4 416 Nitride complete bolt carrier group, unfired. - $290

Geissele SMR 14.5" HK 416 handguard, black. 1 missing thread insert on underside as shown, some scrapes from sliding onto barrel nut. - $100 SOLD

Custom Geissele SMR MLOK 12.25" cut down and cerakoted RAL8000 416 Handguard. - $200

9.25" HKey with rails handguard. - $40

MR556/223 RAL 8000 Stock, Buffer tube and Castle Nut. - $275

MP5SD Faux Suppressor (THIS IS NOT A REGULATED ITEM, IT IS NOT AND CANNOT BE CONVERTED TO A SUPPRESSOR) - $80

Sig Folding Stock - $160

Sharps Bros Heatseeker Ruger American Ranch Chassis Handguards. Take-off qty. 2 - $75 each

HBI CZ Bren 2 picatinny endplate - $80

SilenceroCo VP9 Threaded Barrel 1/2"-28 - $100

Surefire V1 Vampire handheld with z86 tailcap. Used, in good condition. - $250

Dead Air booster housing - $60

Griffin EZ LOK piston - $50

Magpul Plum MOE AK lower handguard and grip (with screw). In excellent condition - $25

Crye JPC 2.0 Medium RG Skeletal Cummerbund with cords, shoulder wraps, and single straps. Unused, took it out of the package and removed these to replace with AXL items. - $75

I will NOT send you a message, you must PM me to transact. PP FF (No Notes) preferred, can do Venmo or Zelle if needed.

Let me know if you have any questions or need any more details.

We kicked around how best to run a GB this spring for folks here and Ben and I decided to try a broader brush.

We're still doing 100 blanks available however we split them up based on the most popularly ordered options in caliber and twist rate this way guys don't have to worry about getting a 6 or a 30 or a 22, it's available.

Here is a link to the post I made in the Commercial Section

Here's a direct link to the Group Buy

We will run it until 3/21(Spring Equinox) or when all the blanks are gone, whichever is first.

have two, no expiration dates.

$375 each.

post I'll take it followed by a PM.
Don't send money to scammers... they're impersonating me daily.

Engineer by birth, repairman by trade, amateur hunter, and refuse to let my home be overrun by dipshit imports that left their shithole to infest my home with what made their previous residence dogshit.

We are announcing our Spring Group Buy 2025. The Hide loved it last year for 6mm's and we're trying something a little different this year to accomodate the requests for different calibers. Since we can't really do a GB each month we decided to run a bunch of calibers in different bore sizes with a set quantity of each. 22, 6, 6.5, 7 and 30 cals

There are 100 barrels available total, when the SKU is gone it's gone. For example if someone wants a 6mm 7.5tw and there are only 6mm 7tw options left in the drop down then the 7.5's are already sold and the remaining option is to use 7tw or skip the GB.

A little side story: I've been running faster twist options in my personal barrels (22-7, 6mm-7, 6.5mm-7.5) for a lot of years now and I've never had anything but exceptional results with them. Especially the 6mm's with a 7tw, they've been fantastic for me since 2014 when I switched into a faster twist.

Here's the GROUP BUY LINK

Have an Apex Optics 40% off certificate I won off of a prize table. Was going to get the new RivalX after looking through one as I was throughly impressed.

Will send pic with code as well as mail certificate. Price reflects what I believe is a good value. $200

Not happy about this story but here it is.

Live in Ohio and have to cut grass around a large dying cherry tree that is covered in poison ivy or sumac vines. On most of these I just cut the vines at the base and let the tree be. This one had holes at 3' and about 15' and was a literally hive of activity. Wasn't sure if they were hornets, yellow jackets, honey bees or whatever, but they didn't like my 72" Hustler whenever I went near it.

Being March, I was naively hopeful that it was dormant, and I could drop it and eventually burn it without too much prednisone.

The bees weren't having any of that.

I was able to drop it yesterday then they started to swarm. I mixed up a bit of Termidor (Taurus SC) and a pint of water and hit the hollowed out base.

Went back this am to cut it up. Not a soul survived. I was unhappy that it turned out to be a 8-10' column of honey bees with what turned out to be very sweet honey. (yeah, I tried some near the top of the hive). Wish they were something else.

Looking to see if someone has an extra McMaster & Carr spring they would like to sell.

Hey all,

I know this question has been asked a couple times and I've been reading through some recent threads, but hoping for folks with experience on a few of these optics to chime in. In short I have a proven 20" SAMR-ish .223 gun that I love but just haven't shot much in the past few years.

So I pilfered the old school mildot SWFA 3-9 I had on it and ending up selling that along with a .308 bolt gun to a buddy getting into hunting.

Well I'd like to get an optic back on the rifle and I figured there's probably something out there these days for around $1K that'd have some nice updates compared to the old reliable SWFA. And wouldn't you know it there's just as many trade off's now as there was back then.

I'd be curious if anyone had any $.02 on my considerations here or if I'm missing something I'd appreciate it. Use case is primarily a bit of target shooting, coyote hunting, and maybe a gas gun match from time to time.

Things I like (for this gun):

FFP
2-10x-ish magnification
Length around 13" or less
Weight around 25oz or less
Illumination
Zero Stops / Locking Turrets
Not super busy reticles
Adjustable Parallax (nice to have but not required for this gun)

Things I don't like (for this gun):
Unreliable things
Heavy / Long Scopes
Super busy reticles / should be hunter friendly


I have a range for sure but this is what I'm considering:

_________________________________________

Leupold Mark 4HD M5C3 FFP TMR Illuminated
~$1000

My initial replacement thought. Love the size/weight, features, reticle is acceptable for me.
Concerned about tracking and reliability based on Rokslide tests for the money. Conflicting reports on glass quality for the price.

_________________________________________

Steiner H6Xi 2-12x42mm STR-MIL FFP
~$1500

Love the size/weight, features, glass is probably excellent, bit spendy (diminishing returns?)
Reticle is a bit busy for me and feel it might get lost hunting

_________________________________________


Trijicon Credo 2-10x36 FFP w/ Red MRAD
~$1000

Good size/weight if just a touch long, Japanese glass
Reticle a bit busier than I'd like, unsure if better that the Leupy for the same price?

_________________________________________


Athlon Helos BTR GEN2 2-12x42mm AHMR2 FFP IR MIL
~$400

Like the size/weight, features, generally like the reticle, ranging capability is really cool, cheap means more money rolled into scope on a different rifle faster, or less buyer's remorse if someone ever comes out with a banger MPVO.
Don't love a 1 MOA dot, biggest concerns is on quality and reliability, glass is said to be OK, seems like a dice roll.

_________________________________________

Vortex PST Gen 2 2-10x FFP Mil
~$750

Like the size/weight, generally like the reticle, cheaper than other options, Vortex warranty
Discontinued/Somewhat Hard To Find, glass said to be OK

_________________________________________

Bushnell LRTSi 3-12 FFP
~$800?

Like the weight, a touch long, G3 tree is ok, said to have great Japanese glass, should have bought one years ago during the blow out.
Discontinued/ Very Hard To Find, read a few horror stories about Bushnell warranties on these and replacing them with worse options

_________________________________________

Maven RS1.2 - 2.5-15x44 FFP
$~1100

Excellent performance in Rokslide tests, Good glass, good hunting reticle, great magnification range
Definitely a long boy, a touch on the heavy side, temptation to slap on a bolt-gun hunting rifle instead

Edit: To be clear, I expected to see zero shift between barrels, just trying to determine what would be considered excessive.

I just started using an AXSR after getting set up with one with several barrels of different calibers. Had a question after my first range trip and thought I'd post this since I don't have any experience with this platform and according to most threads I've found this doesn't seem like the norm.

The gun came with the .300 Norma barrel and I also got a 20" .308 AI barrel, A 27" .338 Lapua AI barrel and a 24" Stainless Proof 6.5 Creedmoor barrel.
What is considered a typical zero shift when swapping between calibers or is there even a typical outcome?
I zeroed the gun with the .308 barrel (175 FGMM) and when I switched to the .300 Norma barrel (215 Berger OTM ammo) it was less than .2 mil off the .308 zero which is fantastic.

When I switched to the AI .338 Lapua barrel (Hornady 285 ELDM) it was 9.5” low and 4.5” left. Would this be considered within acceptable limits or does this sound unusual for this rifle?
I actually thought I did something wrong installing the .338 barrel so I loosened the locking bolt and barrel and re tightened everything and the shots went back into the same group. I understand not to expect it to hold the same zero between barrels and calibers, just wondering if this is typical.

Foundation Centurion cut for Defiance short actions. Color is dark distressed and is cut for Hawkins DBM M5 bottom metal. Package includes: stock, Hawkins DMB M5 bottom metal, Gray Ops bag stop, 22 piece brass weight set, 22 piece lead weight set, L3I DINA weight (installed), spare arca and anschutz rail with hardware. Cross posted on ARFCOM and Tacswap. Can send more detailed photos.

Boxed up and ready to ship. Making room for a new setup. 160 each shipped if you donate 25 bucks to the hide with my name on it, or 300 for both and 50 to the hide. PayPal FF works good.
thanks

I have a barrel i bought and probably not going to use for a while. 24" carbon fiber wrapped proof Rem varmint profile, spun by Straight jacket armory in 6.5 Creed. Barrel has 150 rounds or less. $600 shipped
Will post pics later.

5/8-24, .94” muzzle, 8T. 885 round count. 1/2 MOA with 147 eld/H4350.
Price is $300 shipped, USPS insured. Payment via Zelle or USPS MO, Please-NO OFFERS OR TRADES.

Trijicon MRO HD 1x25 Red Dot Sight with 3x Magnifier on QD mount. Includes a Tennebraex kill flash, original box and accessories that came with it. Never used in comps, very minimal salt.

Reticle modes:
-2.0 MOA dot with 68 MOA + 2.0 MOA
- Seamlessly transition between center dot only or full reticle options

Includes:
- Full Co-Witness Mount AC32068
- 3x Magnifier and Quick Release Flip-to-Side Mount
- Trijicon Logo Sticker
- Lens Cloth
- MRO and MRO HD Magnifer Manual
- Warranty Card
- Mounting Tools

SKU: MRO-C-2200057

SOLD for the set TYD CONUS

All items include shipping CONUS. What you see is what you're getting. I only accept Zelle or cash, so please do not ask if I'll take any other form of payment. Trades/partial trades I'm interested in are certain Aimpoints; Surefire pistol lights; Volquartsen 4.5" Black Mamba or Scorpion; HK VP9 threaded barrel; PMM Comp for P365, P365XL, G19 Gen 4; Custom Glocks; Glock 17 MOS.

XLR Industries Element 4.0 Magnesium Chassis - SOLD
JAE 700 G4; 700SA, RH. Used in a couple matches. - $1050

MDT Dampers SRS-X Green - $50
Seekins ProComp 10X stock, Black - $90
MDT takeoff pistol grip carbon - $100

(see other listing for mounts & rings)

American Precision Arms Gen 3 Little Bastard - 5/8x24 - 6.5mm - SOLD
Heller Arms Muzzle Brake - 5/8x24 - 6.5mm - $50
PWS 5.56 Flash Hider - $20
Elite Iron 5.56 OP COMP Brake - $85
CMT 5.56 Combat Recoil Compensator - $50
Elite Iron CQC Brake and Cover Cap - $125

Mcmillan 7" Rail w QD mount - $25

MDT MLOK weights - SOLD

Tier 1 Concealed Axis Elite for Sig P365 - $100

All items include shipping CONUS. I only accept Zelle or cash, so please do not ask if I'll take any other form of payment. Trades/partial trades I'm interested in are certain Aimpoints; Surefire pistol lights; Volquartsen 4.5" Black Mamba or Scorpion; HK VP9 threaded barrel; PMM Comp for P365, P365XL, G19 Gen 4.

MDT 35mm High One-Piece Mount - $200;
MDT 34mm Med One-Piece Mount - SOLD
ZCO 36mm 1.1" (APA made) scope rings - SOLD
American Precision Arms Gen 2 Tru-loc 35mm 1.100" Scope Rings - $80;
American Precision Arms 30mm 1.031" - SOLD
ZCO 0MIL 36mm Cantilever Mount - $250;
Spuhr SP-6601 6MIL/20MOA 36mm Mount - $250;
Seekins 30mm 0MOA Cantilever Mount - SOLD
Vortex 34mm Cantilever Mount - $150;
Vortex Spitfire HD Gen 2 5x and Viper Red Dot combo - SOLD

I put this together a while back to keep in my range bag as a cheat sheet but I made a couple of changes to it so I thought I'd share it with you all, some may find it useful. The theory is that it can help a shooter with a basic carbine make accurate sight corrections, set up a fairly accurate ballistic profile if you don't know the exact velocity, help analyze shot groups, help estimate and compensate for wind, range estimate, and do a little bit of maintenance if something comes loose or you're moving stuff around. I taped mine up with packing tape, folded in to 1/4's and slipped it into a pocket on my range bag.

"Front"

"Back"




Cheers folks!

Looking for a scope for my b14r and fairly narrowed to these 2 anyone have time behind both the one 7-35 and ares etr 4.5-30 with aprs6 reticle? Right now closeouts on the ares is 800 and the one is 600. Is the ares worth 200 more? I’ve got a couple helos I’ve been very happy with and trust Athlon will be around where dnt is the new kid on the block.

I am looking for the RRS BRACS Arca rail.

Please send me a PM if you have one for sale.


Thanks,
Rhett

Arken EP5 7-35 Mil 34mm tube-Brand new, just pulled out of box to look through. $620 shipped
Will post pics later.

223 rem

Headspace modular comparator insert $30 shipped

Straight Bullet
Modular Comparator insert
$30 shipped

$50 shipped for both

6.5 30 degree shoulder
Headspace modular comparator insert $30 shipped

6.5 bullet
Modular Comparator insert
$30 shipped

$50 shipped for both

6mm prc barreled action. Mac bros evo II action, proof 20 inch 7.5 twist barrel 2 mags muzzle brake. 200 rounds of lapua brass. Hornady bushing dies. 450 rounds through it.$1800

For sale is a like new unfired Glock 19x with ATEI work.

Comes with factory box and mags
Comes with grip plug
comes with Great Lakes Customs chopped beavertail

ATEI milled for holosun 509t
ATEI cerakote to match the 19x frame
ATEI (great lakes customs) hybrid stippling (he also eliminated the front lip on the grip/magwell)
Trigger Guard undercut
Suppressor height sites installed by ATEI
I can sell the Holosun 509t that was on it as well if buyer wants the turnkey package

Asking $900 $800 shipped OBO shipped from me (individual) to your FFL. If your FFL requires from FFL add $50 to the price