Like brand new, never used in a match

7-35X56 mil XT NF ATACR sitting in a Gray Ops 1.25” Tall 1 piece mount. Still have original box that it will ship in

Pictures will be posted later tonight.

Looking for $2850

Ready for competition Vudoo V22s single shot, just add your scope and tuner of choice. This vudoo has a Mullerworks 8 grove barrel. This barrel was selected from batch of barrels that where air gauged and slugged. This barrel tested the best and was cut with a Winchester 52 chamber. This barrel is very ammo tolerate. It shoots Eley and Lapua ammo very well. I have won matches with both Eley and Lapua ammo. The trigger is a Bix and Andy, and the stock is from Randy Owens with a custom butt plate. This rifle will also come with a second barrel, it’s a Shilen Select Match Ratchet 4 grove cut by David Lott at Di Precision in Texas. I will include a bore guide, additional springs that the rifle came with an action wrench and Lowey bolt protector. If your local to Florida or coming to Florida, I will make available for sale a case of Eley Tenex Lot 1077. This lot is no longer available as I bought it all since it shot so well in this rifle and my other rifles, it’s my main match ammo. This ammo was purchased from Whidden Gunworks after lot testing in theirt Tunnel. This ammo has produced match wins and shoot very well in this rifle. Rifle will come in Pelican hard case.

Total cost of this rifle setup comes in at about 5K.

$3700 shipped including both barrels to your FFL in the lower 48 states

$3200 for Vudoo with the MullerWorks 8 grove barrel already installed.

No more pedo parades in Hungary

Selling my 40-xb tactical repeater .308 win, rifle has a few upgrades like a badger bolt knob, triggertech special, and a threaded muzzle. Scope and rings are not included however the nightforce rail is. Will also come with the factory hard case. Rifle has ~500 rounds through it. Looking for 1400.
PP F&F shipped to your ffl.
***SOLD***

Rico RS75 1280 Thermal for sale.
This unit was purchased back in October 2023 and still has 3 years and 8 months of warranty remaining. Includes original hard case, 3 - batteries, external rangefinder, battery charger, and cables.

$9000.00 Shipped

Eotech exps2-0. $450 shipped.

I have a vortex gen 2 pst 3-15x44 mrad ill get pics and the type of reticle later today comes with rings and a throw lever can't recall exactly on the brand of rings. Asking sold

Also have a kahles 525i skmr3 reticle comes in original box with throw lever, Aadmount scope caps, parallax throw lever and spur 1 piece rings. In the pics it looks like theres scratches on the lens but theres not its just the reflection of the light there is a small paint chip on the right side of the forward bell housing which is visible in the pictures. Asking 2500 price drop now asking 2300.

BLUF- They/Them tranny or whatever goes nuts (no pun intended) and has road rage at a guy & his grandkids. Guy shoots They/Them/It

Magpul Pro 700 Folder Chassis
Black
Arca Rail
Inletted to accept actions with trigger hangers
600
Will meet is local to San Antonio area.
Uvalde, TX

FS: Manners PRS-TCS in ALTUS Badlands.
M5 Mini Chassis
Full Weight Kit
R700 Right Hand Inlet
1300
Will meet if local to San Antonio Area.

Will sell as package deal or separated.

Impact 737 short action, 90* bolt throw and a 20” Proof Research 22 Creedmoor Sendero Light Carbon barrel with around 500 rounds through it. Threaded 5/8-24 and 8 twist. Barrel was chambered by Mark Robles, Radix Precision in Omaha. Shoots really well with 75-85.5 gr bullets, I just don’t hunt a whole lot anymore.

Asking
Action only: $1150
Action with barrel: $1700

A little off subject for the Hide, but I know there is a depth of knowledge here.

I need to build a battery pack for a headlamp. Here are the specific battery requirements: 18.5v li-ion 4300mah
I know where to source the connector for the headlamp & I can wire and solder very well. I do a lot of DC automotive work but haven’t done much with small lithium ion batteries and AC chargers. I know / think there are regulators for both charging and discharging that probably will be needed.

I guess really what I am asking for is if anyone know of a quality reputable brand / source for the prebuilt battery pack.

Anyone have any real world experience with buying this stuff?

Multicam sling with HK hooks, works well but no longer needed for me.

Asking $45 shipped CONUS

Looking for the 16" forend for an accuracy international aics ax chassis. Preferably in peanut butter but not picky.

I got these MBX mags when I purchased a used MPA DS9.
I have five (5) of them. They are non-lock back magazines, and I don't have any use for them. They are like new.

I'd do $100/each shipped
If you buy all five, I'd do $475 shipped for all of them.
I prefer Zelle, would accept PayPal F&F or USPS money order.
Cross posted and for sale locally (Pittsburgh PA area)

No trades at this time.
Not shipping to any state with magazine restrictions.

Thanks
R

New unmounted 4-20x50 Atacr
Selling to move to a different optic.
$ SPF shipped
NO TRADES
Paypal F&F or G&S (Buyer pays the fee)

Razor LHT 4.5-22 mil comes with mk scope caps, mk throw lever, and Talley med rings

1075 tyd

Tract Toric 4.5-30 UHD ELR for sale. Selling because I upgraded.

Will come with sunshade, throw lever, and applied turret tape.

The elevation turret has been filed down internally so it doesn’t have to be unlocked to rotate.

Asking $1000/shipped

PM for more info or pictures and can provide number as needed.

180$ per brick shipped…. Will sell in 4 brick chunks if you don’t want all of it

Lot 35559/502911 GONE

Lot 34559/503271 GONE….

Let me know…

Pretty much new. Stuck it on a rifle but never actually left the house. Changed directions with that setup and now no longer needed.

Will come with everything as new, rings pictures are NOT included

SOLD shipped

KRG Bravo. Rem 700 SA RH Tan with KRG adjustable height butt pad and arca rail.

$425 to me shipped to you.

So I pretty much only shoot at night with either thermal or NV clip on's. I've seen the Stiener M7Xi IFS 2.9-20x50 pop up several times over the past few years. I keep coming back to looking at them and wondered why are these not more popular for nighttime shooters running a clip on? Obviously, folks who run a dedicated thermal scope wouldn't have a need, but I shoot out to 1k on deer each summer and being able to dial and have the HUD once I have a range and seems like it would be awesome.

What is the downside (cost aside) I am missing?

I am pretty flexible on payment methods, electronic or otherwise. This will be cross-posted, so items will go by timestamp. If you want something, call dibs on the post and send me a DM, I will not send you one. Dibs beats haggling.

Feel free to make me an offer, cash or trade (potential items listed below). Worst I can say is no!
-6.5cm brass & bullets
-223 brass & bullets
-World's Finest Trimmer 223 Trim Chamber

• Hornady Lock-N-Load Classic Press - $175 shipped - Like-new condition. Used to load maybe 50 rounds + decap ~100 more.
  • Inline Fabrication Ultramount
  • 4x Lock-N-Load Die Bushings
  • Lg/Sm Primer Feeder Arm
• World's Finest Trimmer 1/2" Carbide Cutter - $30 shipped - New & unused
• Lot of Dies - $90 $70 shipped (individual prices below)
  • Lee Easy Adjust Dead Length Seating Die - 6.5 CM - $15 shipped - Open but unused
  • Lee Powder Through Expander Die - 45 ACP - $13 shipped - Used, in good shape
  • Lee Powder Through Expander Die - 44 SPL - $13 shipped - Used, in good shape
  • Lee Seating Die - 44 SPL - $13 shipped - Used, in good shape. No case
  • Lee 223 Collet Neck Die Set - $30 shipped - Catch & release from this forum. Has been used but is still in great shape. Has collet neck die & seating die
  • SPF Hornady 45 Cal Expander Die - $25 shipped - New & unopened SPF

Got my new build out to the range today. Put 80 rounds through it. Ran perfectly, no malfunctions of any kind. A little overgassed with SA gas block wide opened, vented it 7 clicks and got a nice ejection pattern and softened a bit. Goups seemed to tighten up a bit through the session. Last 2 groups on paper were around the 45-55rnd mark and just at 1moa @100yds. After that I started banging the steel at the back of the range at ~225yrds. No problem consistantly hitting the 8" plate 4 or 5 out of 5 shots. Next time I'll get some groups at 200yds on paper. Also first time getting behind the Zeiss LRP S3 6-36x56 and it is awesome. Rifle shoots very soft, no problem seeing splash even at high mag. Reticle barely leaves target. The rifle has more in it. I'm not in love with the Timney Calvine Elite. Had it on the shelf from another build I didn't like it in and thought I would try it again. Swapping a TriggerTech in it. I was shooting Hornady 108gr Match. I'm hoping to eventually stretch it's legs.

Mega upper/lower
FCD small parts
Satern 18" barrel and matching bolt in Toolcraft BCG
Zeiss LRP S3 6-36
Nomad

295pcs of Alpha 22gt Brass 180 2x and 115 1x. $275 Shipped

1170 95smks $400 FF Shipped