I have a 20” 75-100 rounds on it, I didn’t even shoot it myself…

440$ shipped

Going through some stuff and I’m no longer reloading. There is 258 ELD 178’s and 145 155’s. Also included will be a box of 165 spitzers. Will take $150 for all of it

$750.00 shipped CONUS. This is new and unopened. Brownells Exclusive version. All you need is a BCG, Muzzle Device and a Charging handle. These are $899 Plus tax and shipping from Brownells https://www.brownells.com/gun-parts...s/m4a1-fsp-5.56x45mm-stripped-upper-receiver/ Even with a 15% coupon these would be $764 plus tax and shipping - which would bring you to about $830-850 (depending on your state)

First two photos is of actual sealed box and the rest are stock images.

$180 Shipped CONUS

Great stock zero issues cut for M5 dbm. Weighs 5lbs with full arca. Cut for Lone Peak Fusion SA. M24 barrel contour

$875 OBO

Interested in trade for manners LRH or CF Fusion profit barrel.

Pm with questions or offers thanks

Compass Lake built upper with an 18" Douglas barrel. Barrel is stainless but was painted black by previous owner (it should come off fairly easily). Includes BCG and charging handle as well.

-CLE Upper and Rail
-18" Douglas Barrel (1/7 twist) chambered by CLE
-Superlative Arms AGB
-CLE BCG
-Mil-spec charging handle

I got this upper on trade and don't really need it. Previous owner wasn't sure about the round count, but it was definitely under 1000.

Asking $650 shipped.

Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

Trades (+/- Cash):
-M300 Series Body (Surefire, Arisaka, etc.)
-DD MK18 RISII FDE Rail (9.55")
-KAC Free Float RAS (Long)
-Stripped Upper in FDE
-A.R.M.S. #22M Rings

Triggertech special
REM 700
Lh
Without bolt release
Flat shoe
Pull adj 1-3.5#

This came on a mpa build I purchased and I have since switched all my vertical grips to the bottom safety triggertech. Fired appox 175 rounds

$125 shipped

I have a brand new in box Chaves 229 Redencion Kickstop Tanto with Black PVD Ti lockside and Green Micarta show side. Comes in box with second plain clip. Factory Skull clip is installed. Never used to cut and never carried. M390 blade is factory sharp. Smooth action on bearings. Kickstop flipper is nice and tucks away when opened. This model is now discontinued.

Asking $210 shipped

PayPal FF, Venmo or Zelle for payment.

Excellent condition savage model 11 in 223. Has the Savage.AccuStock with a chassis bedding block


$325 shipped

I built my dad a 243 AR out and he had some issues firing it today. He’s running an adjustable gas block. During firing some of his round were not ejecting and staying in the chamber and then trying to double load the next round. The problem is he lives very far so I’m unable to troubleshot it. I thought maybe he needed to open his gas block more but with the rounds not extracting at all it sounds more like an extractor problem? Some guesses would be greatly appreciated

asking 350 shipped or best offer, new in box. 2 3/4-3", 30" Full Choke

Great shooting rig I’m going to let go. Action is nice and slick with about 3k rounds through it.

Barreled action only
Vudoo 360 action 30moa base
25” Mullerworks barrel, 1.25” straight, 13tw
Threaded for EC v2 tuner
Comes with EC v2 tuner

Asking $2500 shipped

Looking to buy accuracy international 338 LM

Used Surefire x300 Ultra. Has the U adapter installed. Was on my G19 for 250rds or so. Has some carbon build up on top from muzzle. But it’s bright and functions just fine. $190 shipped.

Hi everyone,



So I really hate the colors of my Savage Axis II. The color scheme doesn't match anything around me. Instead of Grey and Black we have more Green, Brown and Dark Green being in Tennessee.

So I decided to paint it. This was my first time painting anything like this. Let me know what you think.

For sale is a pre-64 (1950) Winchester model 70 National Match .30-06. It has the correct Lyman sights, 48WH rear and 77R front. It's a very nice rifle with a bright bore. The stock has been varnished and there are two small screw holes in the tip of the forend that have been filled, probably for a nameplate. Other than that a very nice looking and complete pre-64 National Match rifle.

$3750

May consider full or partial trades for interesting stuff I don't already have like:
S&W 952
Sig P210 target or P240
Quality optics
Vudoo or Rim-X
A new MOPAR big block TCI 727 trans and converter
Obermeyer barrel blanks
Fast twist .338 barrel
Manners stock
AI chassis

Latest gen - purchased early 2024. Scope has maybe 200 rounds on it. It's in near LNIB condition, except for a few small areas of ring ghosting which is barely visible only in some lighting and if you really look hard. It looks and presents like brand new in box. All original box and accessories are included. Prefer Paypal. If you want buyer protection please add 3%. I'm new to Sniperhide so happy to provide any additional verifications. Happy to FaceTime or otherwise video call.

$1,100 Shipped CONUS.

Very early Charlie Ochs black auto folder.
This is from a batch that were referred to as “sterile “ . The knife has no markings or serial number. I believe it’s from 1987, it’s in excellent condition. Not many of these floating around.
$400 shipped.

Like new condition, includes trigger guard and hardware.

SOLD

Purchased from another member, went a different route.

-10.5” BA barrel, not pinned. Barrel is unfired.
-H&R muzzle device
-PSA A2 upper
-PSA charging handle
-Pelican light
-Carry handle picatinny rail (not pictured)

*NO BCG*

SOLD

***Barrel is sold pending funds***

Hey Guys,

Selling off a 22" Proof Ruckus Prefit. I would guess it has 200-250 rounds through it. I grabbed it for a switch barrel setup, but I have swapped that out for a short action and don't have any use for this guy anymore. Looking to get $$$ shipped to the continental US.

I have a teslong, so I'd be happy to hop on a video chat, share screen and scope it for anyone interested. Thanks for looking, let me know if you have any questions.

Brand new never used. Will include Modified case for OAL gauge also brand new. Full length bushing dies. Sold

In like new condition. Has been attached to my RRS arca head a few times but mostly sat in the box. Will ship as shown in original box.sold

Up for sale is a Dometic CFX3 75DZ Dual Zone Cooler (Refrigerator and Freezer) with protective cover. It is in "like new" condition and was never used. This was because I was posted abroad for a couple of years and did not have access to it. I'm only selling this one because I no longer need it; the new trailer I bought has a cooler installed.

These coolers retail for over $1100 and the covers for them cost $179. I'm selling everything for: $700. It would be ideal for anyone who is involved in overlanding and/or going on extended self-supporting road trips for PRS/NRL matches, camping, hunting, etc.

I reside in Chapel Hill, North Carolina and would prefer to handle this sale in person. I have no problem driving a reasonable distance to drop it off. If a buyer wants the cooler shipped, all costs will be their responsibility.

Feel free to PM me with any questions/requests for additional photos.

Thanks for checking out my listing and have a good one! S/F!

Sold! Thanks everyone!

Gents - Big Dog Steel mount for a Zero press. Used little and this thing is a hoss.

Xxx tyd lower 48 or buyer picks up shipping difference. Happy to do any form of reasonable verification and send more pics via DM. Please know it may take me a couple days to drop off at PO or UPS. Pp/ff, venmo, or MO please.