Hornady once fired brass. 118 pieces.

$50 shipped

168gr Hornady ELD-M
100 yards
65ish *F
30% humidity

$44 a box/20

CZ 600 Range
Vortex 5-25x56
Vortex pro rings
Ultradyne appolo muzzle brake

Hilariously this was probably my best shooting far as focus and trigger pull…

Will ship fully assembled with 2 sets of external weights, DIY One piece internal weight, and buttstock dampeners

Near new, only marks are from assembly of buttstock and internal weight. Took it out today and just not my cup of tea.

Looking for a Samson cut for an impact with a centurion grip, will entertain other offers for rifle components as well.

I have a 16.5” proof barrel I’m looking to sell. 450 rounds down it. $720.

Leupold VX5HD 2-10x42 Firedot Duplex reticle

Great condition, perfect glass, everything functions as it should. Includes factory box, bikini covers, unused CDS certificate.

$850 shipped

Selling a Hawkins precision updraft 30 cal muzzle brake. This is the 1 inch diameter version. Only shot about 50 rounds through it. Asking $125 shipped. I only accept Venmo.

Selling an area419 hellfire ti in 30 cal. This is the brake ONLY. Has no rounds through it and comes in original box. Asking $140 shipped. I only accept Venmo.

I have decided to go a different route, so for sale is a Nightforce 2.5-10x42 C461 scope. It has the green and red illumination as well as Zerolock.
NF Scope shipped to your door bare-$1450

gone

Good morning, Members!

Below is an updated list of the remaining firearms I have for sale.

I've again added more firearms to the list. A nice Barrett MRAD 338LM/300WM build, a Leas Baer Custom and a few others.

Please reach out to me for photos and further information regarding any of the items.


UPPERS

Daniel Defense DD5V1 7.62
Complete Upper
16 Inch Barrel
Keymod
$1000


BOLT ACTION/LEVER ACTION

Barrett MRAD 338LM and 300WM Conversion Kit
338LM and 300WM
26” barrel
SPUHR SP-4003B Mount
Schmidt Bender 12-50x56mm PMII FFP .25 MOA P4F-MOA Reticle
Honeycomb sunshade
Atlas bipod w/ claw feet
B&T Accushot monopod
US Optics rail mounted swivel bubble level BBL-300
Includes both 338LM and 300WM barrels and bolt kits
Monolithic upper receiver machined from 7000-series aluminum
Full-length M1913 picatinny top rail with built-in taper
User-changeable barrel system
Fully adjustable match-grade trigger
Folding stock
Tool-less length of pull and cheek piece height adjustment
Ambidextrous paddle-style magazine release
Direct thread suppressor ready
Rare dark bronze finish
Retail: $12,000 build w/ conversion kit
$9000

LRK Mechanical Custom Benchrest .308
24” Stainless bull barrel
Remington 700 SA action
Timmy match trigger
McMillan competition stock w/ adjustable LOP, shoulder position and cheek rest
Python dipped print
Retail: $3500
$2500

Cooper Firearms Model 54 Jackson Game .22-250
.22-250
1/2 MOA accuracy guarantee for centerfire cartridges
AAA Claro Walnut stock, roll over cheek piece, semi-beavertail forearm
VE hand checkered grip in a cross-over multi point pattern
Hand rubbed oil finish
Pachmayr recoil pad and steel grip cap
24" stainless steel barrel
Matte metal finish
Detachable magazine, M51 Four (4) round magazine, M54 & M52 Three (3) round magazine
Fully adjustable, single stage trigger
Weighs approx. 6.3-7.75lbs
Retail: $3395
$2750

Ed Brown Custom
300 WM
26” Barrel
Sub MOA guarantee
Retail: $4000
$2000


TACTICAL

HK MR762 A1 w/ LRP Upgrades
.308/7.62
Leupold Mark 6 3-18x44MM 34MM Tube M5B2 FFB Tremor2 Reticle
SPUHR SP-4024 0MIL/0MOA 34MM Cantilever Mount
Atlas B10 V8 Bipod w/ Larue LT271 Picatinny Mount
HK G28 Adjustable Cheekpiece Buttstock
Advanced Armament Suppressor Adapter
(THIS IS A MUCH NICER BUILD THAN THE FACTORY MR762 LPR BUILD)
Retail: $8000 Build
$6000

HK MR556 A1
.223/5.56
Leupold Mark 6 1-6x20MM 34MM Tubę M6C1 CMR-W Illuminated Reticle
Larue Tactical LT104 SPR-1.5 34MM Cantilever Mount
Magpul RUG Vertical Grip
Steiner DBAL-I2 Dual Beam Laser
Surefire Scout KE2-A Weapon Light w/ Surefire Picatinny Mount
Advanced Armament Suppressor Adapter
Retail: $7000 Build
$5000

LMT Defense MWS
Multi Caliber Semi Auto
SilencerCo ASR suppressor adapter
Upgraded trigger pin set
6.5 Creedmoor 1/9 SS, 20 inch barrel
243 WIN 1/9 SS, 20 inch barrel
338 Federal 1/10 SS, 20 inch barrel
260 REM 1/9 SS, 20 inch barrel
308/7.62 NATO 1/10 CB, 16.5 inch barrel
Retail: $6100
$3750

Precision Firearms Model PF-15B
Semi Auto
6.5 Grendel
24 inch barrel
Upgraded grip, trigger, bolt release and safety lever
SilencerCo ASR suppressor adapter
Tango Down bipod
Retail: $3075
$2250


HANDGUN

Les Baer Custom 1911
Ultimate Tactical Carry 5” Match Model
45 ACP
Baer steel NM frame
Baer steel NM slide w/ front and rear serrations
Baer NM barrel w/ stainless match bushing
LBC deluxe fixed combat front/rear tritium sights
Lowered and flared ejection port
Baer Checkered slide stop
Baer extended ejector
Baer extended safety
Baer aluminum match trigger, crisp 4 lb pull
Baer deluxe commander hammer and sear
Baer tuned extractor
Beaver tail grip safety w/ pad
High checkered front strap
Flat checkered mainspring housing
Beveled mag well
Polished feed ramp and throated barrel
Custom ivory grips
Blued finish
Retail: $3200
$2500

HK Mark 23 .45 Auto
.45 ACP
5.87” threaded barrel
Picatinny combat rail
Custom built match grade accuracy combat handgun
Operationally deployed by U.S. Special Operations Command
Polygonal rifling
Retail: $2500
$1800

HK 45 Tactical
.45 ACP
Threaded barrel
Molded finger grooves
Light/accessory picatinny rail
Internal mechanical recoil reduction system
HK lock-out system
Ambidextrous magazine release
Retail: $820
$600

Ed Brown Custom Executive Elite 1911
.45 ACP
5" Government model slide, single stack Government frame
25 LPI checkering on forestrap and mainspring housing
Matte finished slide for low glare
Traditional "square cut" cocking serrations on rear of slide
Fixed black rear sight, gold bead front sight
Serrated rear of slide
Retail: $3299
$2500

Ed Brown Custom Kobra Carry 1911
.45 ACP
4.25" Commander model slide
Single stack Commander Bobtail frame
Exclusive Snakeskin treatment on forestrap, Bobtail housing and slide
Single-side, carry profile thumb safety
Fixed black rear sight, orange HDXR front sight
Stainless finish
Retail: $3399
$2600

Smith & Wesson Model 29 Custom Engraved
.44 Magnum
4” barrel
N-Frame series - Large
Double-action
Blued finish
Smith & Wesson custom wood display box
Retail: $1300
$1000

looking to buy a used right handed 6arc/6.5gren rem700 bolt. Pm me

Hornady custom grade 6mm ARC full length die set

$50 shipped

PayPal, Venmo or Zelle

I have two Chargemaster Lite Powder throwers. Asking $350.00 for both shipped CONUS. I purchased one of them new, the 2nd one here on the PX. The one I bought here is missing the little rubber cap that goes on the throw tube (it was missing when I got it). Otherwise both are in like new condition and work as they should. I have not done any modifications to either one. I have the original packaging for the one I bought new, if the buyer wants it, but not the other. If the buyer doesn't care about the original packaging, I will ship them both in one box and knock $20 off the price since the shipping cost will be reduced. I'm in the Denver metro area if anyone local wants them.

I went to an IP Trickler, and I'm not using these anymore so they need a new home. I can take Venmo, Paypal or Zelle. Paypal G&S is fine if you want to pay the fees. Thanks for looking. Please PM me if you have any questions.

New small primer pocket $45

CZ 75 TS Czechmate 9mm

Was sent in to CZ for trigger work by CZ Custom 500 rounds ago.

C-more optic, Alpha-X / Race Master Insert Block

Selling for a friend. Asking $2500 obo

Located in Youngsville, NC

We are an FFL dealer so we can facilitate transfer.

New never used only removed from the box for pictures $125 . Going to keep it.

With Double alpha powder check low powder level sensor mini Mr bullet feeder Dillon 9mm dies and conversion kit Lee case feeder extra parts kit.I’ve loaded only 500 rounds of 9mm like new condition.located in missouri. $800 sold.

Aero Precision EPC-9 builder set - Cerakoted (Done in-house by Aero). Accepts Glock magazines. Maybe 500 rounds through it. Normal wear near magwell and charging handle.

Hiperfire PDI trigger
Aero Precision charging handle
Aero Precision 9mm BCG
Sig Sauer Romeo 5 & Juliet 3 combo
B5 Systems Grip

Hiperfire PDI trigger

• 2 lb Pull
• MIL-Grade Hammer Strike
• H&M BLACKNITRIDE+™ Finish
  • Exceptionally Smooth Feel
  • Enhanced Corrosion Protection
  • Polished Look
• PCC Blowback Tough
  • Hammer Collision Bumper
  • Disconnector Crash Protection
  • Disconnector Spring Crush Protection

Odin Works CQ-B brace
Odin Works 7.5 barrel"

• Caliber: 9mm
• Button 1:10 rifling 416 stainless steel
• For blowback AR builds
• Works with Colt or Glock lowers
• ½-28 muzzle threads Medium profile

Aero Precision charging handle
Aero Precision 9mm BCG
Sig Sauer Romeo 5 & Juliet 3 combo
B5 Systems Grip.


Selling for a friend. Located in Youngsville NC.

Asking $1800 obo

We are an FFL dealer so we can facilitate transfer.

I have a new in box 0MOA LA Mars rail that I’m looking to swap for the 20MOA version. 8-40 screws on both. Let me know if you have one and want to trade.

Also willing to sell for $650

Brand new from Titan Defense LMT MWS SA BCG. $415.00 shipped

Going back and forth between rings and 1 piece also between ARC and 419. With my scope in hand and the receiver I did some math based on Paramount tactical's video about choosing correct height.

Objective diameter w/flip cap installed: 2.5"/2 = 1.25

Picatinny rail height .25"

1.25-.25= 1.00" + .20" = 1.20"

Both ARC and 419 off their rings and 1 piece mounts in 1.26" which should be just about right.

I wanted to run these numbers before spending 200 - 330 $ and having to deal with returns.

The rail is 0 moa and everything will be sitting in a KRG Bravo chassis

Scope is an Ares ETR G2 34mm and 56mm obj for reference.

First time mounting a scope of this size (only experience is with lpvo on AR and prism sights with their own mounts)

Thanks for taking a peek.

Two cases and two spare boxes of 168gr .308 from Black Hills. Still in the cases from BH.

1 box of Black Hills 168 TSX

Preferred trades, no particular order

6 Creedmoor
-108 Hornady ELDM
-109 FGMM

6.5 Creedmoor
-140 Berger Hybrid Targets
-144 Berger Hybrid Targets
-

6.5 PRC
- 143 Normal Golden Target
- 147 Hornady ELDM

7 PRC
- 160 Hornady CX
- 175 Hornady ELDX

Values would need to be close in current market prices. Also open to selling outright.

Looking at more than a few.
Gen 3 razor
Atacr
Nx8
Xtr pro
T6xi
Tract 4.5-30
Mk5HD

I’ve had good luck wjth bushnell but not sure they compete with some of these?

So far, the tract and mk5 are standing out for price. After .mil, the tract coming in under $1500 and the fde 5-25 mk5 coming in under $1700… makes me wonder what the g3 razor is bringing to the table for $1100 more.

Looking to stay around $2000 or under but could do $2500 max if it’s justified

Selling a ZCO 5-27 with the MPCT2 reticle and a Spuhr SP-6002 mount. I have the box from what I recall, I will try to find it for the scope and possibly the mount too. The scope was on my 338L and fired 20 rounds with the scope on it. Have a TT for the rifle now. And this has been collecting dust for a while. It has a safe scuffs on the illumination rotating knob. The rest of the scope is in real good shape. Glass is clean the pic shows what appears to be a scratch, it’s just dust and lint. Scopes is in pristine condition otherwise.

15 mil locking turret
MPCT2 reticle


Asking $3600 shipped & insured

SOLD to @ReneM

PP/FF, Zelle, Venmo

Thanks for looking

This is a brand new take off zero round count trigger that came on a new rifle I purchased, right handed with bolt release. Seems to be around 3.5 lb pull weight.
Pretty sure this is it, feel free to correct me if I’m wrong…

$60 shipped
Zelle for payment