Filter

Accessories Manners t4a

Manners t4a with mini chassis for 700 SA. Stock has a mtu barrel channel and also has an area 419 arca rail with barricade stop installed. Asking 1200 obo bipod not included. venmo, zelle

Attachments

  • IMG_20250418_152319.jpg
    IMG_20250418_152319.jpg
    117.3 KB · Views: 74
  • IMG_20250418_152321.jpg
    IMG_20250418_152321.jpg
    119.8 KB · Views: 71
  • IMG_20250418_152323.jpg
    IMG_20250418_152323.jpg
    125.1 KB · Views: 53
  • IMG_20250418_152324.jpg
    IMG_20250418_152324.jpg
    106.4 KB · Views: 69
  • Like
Reactions: Tjbgooding

Easiest way to chamfer inside of necks

I need to chamfer the inside of thousands of case necks on 25 GT and 6 Dasher virgin brass. The only operation I need to do to the brass is inside chamfer. I have two boys ages 6 and 8 that love to help me reload. Right now my only method is a cordless drill with a VLD chamfer tool chucked in it. The boys have a hard time doing a consistent chamfer with the drill and I can tell it's just a matter of time until their fingers slip off the brass and get cut on the chamfer tool.

What is the absolute easiest way that is fairly child friendly to do this operation?

I'm thinking some kind of case prep tool that aligns the brass in a pilot and goes to the same depth off the shoulder every time.

Accessories McMillan A3 Edge Stock + Badger M5 Enhanced Bottom Metal

Both are in excellent condiition. Carbon fiber stock is inlet for Rem 700, Rem varmint barrel contour, and M5 bottom metal. Sale includes M5 enhanced bottom metal (no mag). I'll also include pillars that came with the bottom metal in case you want to throw it in something else. $800 for both, shipped to your door in the lower 48. Not looking for any trades at this time. Thanks.
20250330_195921.jpg
20250330_195824.jpg
20250330_195759.jpg
20250330_195853.jpg
20250306_164432.jpg
20250306_164419.jpg

WTB WTB Cobalt Kinetics Receiver Set or Rifle

Thought I'd check here before ordering a new set. Looking for a Cobalt Kinetics receiver set (upper, lower and 15.5" handguard) for another build. Will also consider a full rifle for the right price.

Scammers: i'll be asking for photos with username and date in the picture. Mess with someone else.

Attachments

  • A74022053-scaled-1.jpg
    A74022053-scaled-1.jpg
    208.1 KB · Views: 10

Firearms PRI Mk12 Mod H complete upper

**Unfired** PRI Mk12 MOD H
16” 5.56 1-7 twist, Douglas 416 stainless barrel with BCG & gas buster charging handle and flip up irons.This is upper was factory built by PRI.

***This listing is for the complete factory built upper only.***

$1500 shipped to lower 48

Attachments

  • IMG_1322.jpeg
    IMG_1322.jpeg
    2.5 MB · Views: 48
  • IMG_1308.jpeg
    IMG_1308.jpeg
    2.3 MB · Views: 44
  • IMG_1307.jpeg
    IMG_1307.jpeg
    2.1 MB · Views: 38
  • IMG_1306.jpeg
    IMG_1306.jpeg
    2.3 MB · Views: 42

Ammo WTS: 6.5 Creedmoor ammo

All prices are shipped within USA ONLY.

Zelle, check and money order only (no notes or comments and items ship after check/MO clear)

New Defender ammo in 6.5cm with new Starline brass and 142 SMK bullets. I have 3 cases left but just sold a 6.5cm barrel so wont be using it. It did shoot exceptional, actually better than 140 ELDM in that AI barrel.

Pricing:
  • All 60 boxes - $1,350
  • 20 boxes - $475

Message me to buy thanks

Attachments

  • IMG_2003.jpeg
    IMG_2003.jpeg
    1.2 MB · Views: 43
  • IMG_2004.jpeg
    IMG_2004.jpeg
    1.9 MB · Views: 41
  • IMG_2005.jpeg
    IMG_2005.jpeg
    2.2 MB · Views: 33
  • IMG_2006.jpeg
    IMG_2006.jpeg
    972.3 KB · Views: 34

Optics mount issues

I have a 737r and use a area 419 tac mount 34mm tube 39mm hight 20moa. My issue is that the cases hit the Pic rail mounting points and fall strait down sometimes back into the ejection port. I tried moving it in every possible position and still have issues. The action ejects fine when the mount is removed. I am waiting to hear back from area 419 and impact to hear what they say. I don't want to use rings and the mount needs to be tall enough for the scope to clear the mdt elite bridges I'm waiting on. Anyone that has experience with the impact 737r and is using a mount that fits my parameters with no issue please let me know. If it matters I am shooting 6mm dasher with grey ops aw mags. Login to view embedded media Login to view embedded media Login to view embedded media Login to view embedded media

Sidearms & Scatterguns Sig just can't get out of their own way

In the last few years, a thread will pop up on these forums about a Sig P320 that had a ND. It usually goes into a the Sig is a pos with other people talking about how great it is.

On March 7th, Sig decided the best course of action was to make a statement to the entire world here.

It's you, it is not the pistol

The TLDR is that nothing is wrong with the P320. If you criticize the 320, you are either working for Michael Bloomberg trying to strip away our 2A rights or you are a communist. The comments under the post are really funny (worth a read).

After getting completely roasted by the internet, Sig doubles down because they won a court case.

See, we told you it was you and not the P320.

Again the comments are hysterical and worth a read. I am going to jump in here and mention that there are currently almost 100 active cases in court against Sig (Lexus Nexus source). To date, Sig has lost six cases where they have been found at fault.

Then we have this bit of joy show up on the internet. Achilles Heel Tactical is holding a class. The instructor is going over the previous drill and there is a discharge on the range. He walks down the line and before he gets there says something like, "Is that a 320"? He then instructs the student to remove the gun from the range.

The two range officers behind the firing line both have said the student did not have his hand on the pistol. The six people immediately beside him all said he did not have his hand on the pistol and was holstered. Altogether, eight eye witnesses said it was in the holster and was a ND.

Bad angle, but you get the idea.

The training company (Achilles) released the following statement.

Achillese.jpg


This guy has released two videos on what he thinks is the mechanical problem with the pistol, if you are interested in why the pistols may be NDing it is interesting to watch.

Sig go boom

Optics WTS ZCO ZC527 5-27x56 – MPCT3X / 10 Mil NLE

All like new.

ZCO 5-27X56 10-MIL NLE with MPCT3X reticle : $3600 shipped & insured

Excellent condition, crystal-clear glass, tracks perfect. MPCT3X reticle + 10 mil NLE turret – ideal combo. Includes original box and accessories.

$3,600 shipped – no trades
PayPal F&F.


DM to claim

Attachments

  • 1.png
    1.png
    6.6 MB · Views: 64
  • 3.png
    3.png
    2 MB · Views: 50
  • 4.png
    4.png
    4.5 MB · Views: 2
  • 5.png
    5.png
    152.5 KB · Views: 2
  • Like
Reactions: Jperk0278

Optics AGM EVOLVER LRF1280 BRAND NEW

I have a brand new AGM Evolver LRF 1280 that I bought on 3/13/2025. It has been removed from the box and used on the front porch only.
Will come with all the original items plus I printed out the user manual and will send that for all of us with older eyes. I will ship to the lower 48
for $6500.00 PP F&F. I am located in Washington OK if you want to do a face to face transaction. Here are the specs from AGM website.

The AGM Evolver LRF 1280 is now the new apex predator in the field. Providing an unrivaled image quality in compact housing, the Evolver LRF is equipping it with a 65mm Germanium lens and a 1280x1024 resolution thermal sensor. Not only that, but it’s been paired with a fully integrated 1000m laser rangefinder and AGM’s new on-board ballistic calculator. A newly designed eyepiece gives the Evolver a very versatile 2.5X base magnification, which can then be digitally zoomed up to 20X on the high end. This means hog hunters will enjoy a base magnification low enough for close range engagements, while predator hunters can comfortably zoom to 5X while still enjoying a crisp 640 resolution before zooming further. AGM’s powerful new imaging algorithm and new semi-circular display give shooters a feeling of precision and sophistication. Large sturdy buttons were designed to aid gloved fingers in cold winter weather, while the removable rechargeable NE-4400 battery offers current and future AGM customers one of the most robust and easy to install battery systems on the market. And of course, a full firmware package has been incorporated to allow users an astonishing level of customization: on-board pitch scale, 10 brightness and contrast settings, warm & cold viewing modes, multiple color palettes, manual focus, picture in picture, ballistic calculation, on-board video recording with sound, 1000y/m laser range finding, Wi-Fi hotspot, multiple zeroing profiles, shot activated video recording, defective pixel repair, hotspot locator and multiple laser range finding modes. Also included is an American-made ADM mounting system.


  • 12 micron detector with 1280x1024 resolution
  • Sub-18mK thermal sensitivity
  • Built-in 1,000m laser rangefinder
  • Various reticle types and colors
  • Ballistic calculator
  • 1x, 2x, 4x, 8x digital zoom
  • Large OLED display with 2560x2560 resolution
  • On-board video/audio recording and image capture
  • Shot Activated Recording (SAR) function
  • Built-in EMMC storage (64 GB)
  • Wi-Fi data transmission
  • Standby mode
  • More than 4 hours battery life
  • External power supply compatibility
  • Waterproof & shockproof
  • 5-year warranty

Attachments

  • IMG_2815.jpeg
    IMG_2815.jpeg
    2.1 MB · Views: 3
  • IMG_2816.jpeg
    IMG_2816.jpeg
    2.4 MB · Views: 4
  • IMG_2818.jpeg
    IMG_2818.jpeg
    2.8 MB · Views: 3
  • IMG_2819.jpeg
    IMG_2819.jpeg
    2.2 MB · Views: 4
  • IMG_2821.jpeg
    IMG_2821.jpeg
    3.7 MB · Views: 3