Wanting to sell my 18” terminus Zeus build. Build specs are Zeus qc short action, TT diamond, 18” m24 bartlein, bedded in a manners T4A, smithed by Deep South Tactical. Shoots very well with factory hornady eldm and cycles well with AW mags. Asking $3000 shipped to the lower 48.

Text me for pics of reamer and whatever info I have. 4804678090

These are good live pilot finishing reamers with 10-15 uses on each. Plenty of life left. Hell I don’t even like reamers until they’ve cut 10+ chambers.

I bought these at the start of my career about 14 years ago and back then deferred to the tool makers suggestions or just bought a saami reamer. Now all my reamers come from JGS and they mark the shank of each one with critical specs. Having every detail lasered onto the side of your reamer is priceless… but 14 years ago I hadn’t realized that yet.

Reamers should be saami minimum body, and in most cases a saami fb/throat. You can often look at the throat grind and get an idea of how long it is, and 1-30 seems to be the most common lead angle by far, so I can usually look at a reamer and have some idea of its throat dimensions.

300 win mag HSS print #T23217
$60
Looks like a shorter saami throat, should be fine for 300wm factory ammo.

6.5x47 Lapua HSS
$60 shipped
Looks like a typical x47 throat… like .150” fb


7 Rem mag HSS PTG 190982
.090” fb 1-30 lead
.317 neck
$60 shipped
This reamer has its specs printed on it


338 Lapua mag PTG
$60 shipped
box says T23218 from PTG. It built some accurate lapuas 10 years ago but I can’t guess the freebore dimensions by looking at this one. It looks pretty long, like .160” fb or so, which I say is long because of the magazine length restrictions the 338lapua faces. 3.850” just ain’t long enough with the 300gr berger elites unless you have very little freebore. The older 300s and the 250s/285s seemed to easily fit 3.850” with some throat length and still reach lands, but lately with guys shooting the 300gr Berger elites I’ve had to use my shortest throated Lapua reamer(.070”)

Pushing this for a buddy of mine. Title pretty much says it all. Second focal, MOART reticle, with digilum. Sits in 1” high NF ultralight rings with the top bubble level. It’s in great shape!

No trades. $1850 shipped.

Well, gentlemen, it's that time of the year again! We're about a month out from drawing the winner for an epic M40A5 clone build, the rifle raffle ends on May 5th.

I donated this rifle to the Scout Sniper Association (SSA) in order to help raise money for the Marine Scout Sniper community through the SSA. The SSA is a 501(C)(3) charitable organization and 100% of the funds raised from this rifle raffle will be used to fulfill the SSA's mission. This includes supporting active duty and reserve Scout Sniper units, as well as helping out gold star families who have tragically lost their Scout Sniper family member. The SSA is a phenomenal organization and they do incredible things for the Scout Sniper community, and any support for the SSA is greatly appreciated.

This year's raffle rifle is an M40A5 clone build, and it was assembled by 2 amazing Marine 2112 armors - Jake Meyers and Deven Huffman. Both of these Marines donated their time and efforts to build this M40A5 sniper rifle. These 2112 armorers have personally built dozens of sniper rifles for Marine Scout Snipers to use in combat. This first-hand experience ensures that this M40A5 was meticulously built to the original USMC M40A5 specifications, with no detail being overlooked.

This is truly an extraordinary clone rifle, and since it's not a vintage gun, its modern features make it a very versatile rifle. You can take it to the shooting range, take it into the field hunting, shoot competition matches with it, etc. Whomever wins this rifle is getting an amazing gun that isn't just historical, it's also very usable! This isn't a wall hanger, it's a rifle that's built to take on many years of hard use. The M40A5 kit also includes many of the SL3 accessories, so it's a complete package.

You can purchase raffle tickets for this epic M40A5 sniper rifle at this link:

https://rafflecreator.com/pages/90636/2025-m40a5-rifle-raffle

Please let me know if anyone has any questions, and I'll do my best to answer them. Thank you very much for your support and I wish everyone luck with their raffle tickets!

Here is the actual prize M40A5 sniper rifle:




Here is the actual prize M40A5 sniper rifle being test fired by members of the USMC shooting team. They easily achieved sub-MOA performance with standard M118LR ammunition, and they really enjoyed shooting this rifle. It's high praise all-round for this M40A5:

1. Buy a Recon G2 for $2800 and get a second scope at half price
2. Buy a G2 Mini at $1995 and get a second scope at half price
3. Buy 2 scopes and get a free Anvil bipod


Charles Follett
Darn Fine Shot
812-917-5653 (text/ cell)
[email protected]

Looking to sell an unfired Barrett m82a1, comes with vortex viper pst mil 5x25, Barrett rings, bipod, monopod. . Will be shipped to FFL in pelican case. Asking $7000 please let me know if you have questions. Have more pictures but can't get them posted send me a message and I'll get them to you. Thanks

Work at the Forest Circus. Seriously thinking of getting out going into teaching and working part time as a forester. I could make the same or more and actually be home and spend time with my family. Stupid shit was going on under Biden and stupid shit is still going on now. We lost some good people due to Rifs and what not but the same idiots are still around and will be for sometime. Its going to be a while until things are fixed. Not being anti Trump, just burnt out on some of the things I deal with in the FS but would not deal with in the Private sector. Grass isn't always greener. I'm ready to just work on my own, I went through licensing, I have my own equipment, I can write management plans, do tsi, mark timber, NNIS treatments ect on my own with private landowners.

I guess the big question is, if I take the deferred resignation would that screw up any chance of getting another job? I am not sure how to explain that one away during an interview. I'm assuming the right answer is to wait until a new opportunity arrives but I am not sure.

1. Buy a Recon G2 for $2800 and get a second scope at half price
2. Buy a G2 Mini at $1995 and get a second scope at half price
3. Buy 2 scopes and get a free Anvil bipod


Charles Follett
Darn Fine Shot
812-917-5653 (text/ cell)
[email protected]

5/8-24
$50 shipped

Looking to buy a scope for an AR15 that doesn't break the bank. $200-$500 range. Looking for a Arken 1-8

FS is a Maven RS 1.2 2.5-15x44 FFP mil scope with Warne Hyperlite scope rings. $1050 firm shipped.
Only trades would be towards a Seekins DMR 223 18” barrel or similar.
Thanks!

Anyone know of a source for these? I've been googling and no luck. I don't know if the gent that made them has passed on or just went out of business. I bought a set years ago for a Mosin M-38 and would really like to get a couple more.

So I'm looking to upgrade either my scope or suppressor for my 6GT build. Right now I have a Specwar 762, looking at a Scythe Ti that would be shorter, lighter and direct thread instead of using a muzzle device and QD. My current scope is the new Gen 2 Athlon Midas Tac 5-30x, and looking at a Gen 2 Razor 4.5-27x or something similar (that's the max budget). Which would make the biggest difference for someone doing light competition shooting and slapping steel at long range just for fun?

Is there/does anyone know what the Military 300 Blackout ammo is? Specifically the projectile weight.

Cheers

I am worried I might crush my scope from over tightening the TriggerCam. Instructions only say do not over tighten but doesn’t provide a recommended torque force

Any ideas?

Um, so Kash Patel chose Jensen? Is this the guy that said all J6 and Trump supporters were terrorists?

Looking to dip my toes into the bolt gun world, from the world of ARs.

The pragmatist in me knows that the Seekins and MPA turn key guns are the best value(s) under $3k.

The eternal tinkerer in me knows I won’t be happy with a factory gun as configured. With a hard $1250 cap on a chassis, is there anything better than an MDT ACC Premier Gen 2 or an MPA BA ESR?

The intent is to configure the rifle (minus glass and mount) for $3k, so I think that budget for a chassis still allows for a higher end barrel, trigger, and muzzle device.

i'm trying to find out what's required to use a longer cartridge in a long action receiver for 3.850" mags. from some understanding the bolt stop needs to be changed to accommodate for a 4"+ oal. does the port need to be opened up also? then there's the bottom medal and stock fitment for the change or just a chassis or stock that accepts said length(s). so far i'm just looking at bolt faces of .590" and maybe larger diameter wise in .640 or .810" range. not specific on which cartridge will be used for now?

P3 (mildot style) reticle. Great condition, glass is perfect. Used for hunting on occasion, otherwise a safe queen. Includes butler creek caps.

$1000 shipped.

Would consider partial trade +cash from me towards Leica Geovid Pros or Swarovski SLC 15x56.

Greyops large side weights, m lok. I got this for the original Mpa Matrix chassis but can be used on any m lok chassis.

Sold

PM if interested

Would someone from ICE please launch this beaner back to Mexico… then strip her organization of its tax-free status. And confiscate its funds AND its membership list…


So they can throw another 400k k wets who can afford dues in what amounts to to an illegal and possibly terrorist organization… back over the wall?just ‘sayin!!!

They really are making it easy? Wonder how much USAID gave this fat El Dyke-o?

Sirhr

Put together a new .308 gas gun a few weeks ago and I'm having a hell of a time getting the gas system running. Thought I'd see if anyone here has faced a similar issue. The components are as follows:

LaRue 16" Midlength Barrel
Superlative Arms Adjustable Gas Block
Melonited Mid-Length Gas Tube

I've assembled a lot of gas guns over the years and have never had this much trouble with a gas system. I installed everything and test fired only to seemingly get no gas to the bolt. So, I disassembled and the reassembled with the same result. I'm wondering if it is an issue with the gas block or gas tube. I have a new gas tube coming to see if that fixes things. I used the spaghetti trick to make sure the gas hole is lined up with the gas block.

This is the first time I've tried a SA adjustable block, so I'm not sure if there is a defect with the gas block. I set it up per the instructions, but I don't know if I might also be doing something wrong. I guess I can replace the gas block with a standard one as well to make sure it's not a barrel or bolt issue.

Anyone have suggestions or other obvious things I might be missing?

Gents,
Moving sale! We are leaving WA and headed back east to be closer to family. WA has turned into a Liberal Hell Hole, and we are out with retirement.

Little less than a year left on the warranty. Original owner. The unit is spot less and a frigging awesome thermal with the included RF and AB. I have just under $35K into it, It's the Full kit. Yours for $30K + shipping and insurance. ITAR applies and will be followed. So, U.S. Citizens only, and only sold in the U.S.A.
Only three possible trades + cash on your side.
1. PVS-31A or D, but they have to have excellent Specs.
2. One of Jay's PVS-27's in WP. Again with excellent specs.
3. POT Voodoo S with an Envision cable

Pics to serious inquires.

Thaks for looking,
ST42

MPA BA Comp chassis for a 700 short action right hand - $500 OBO

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

Xray 51 chambered in 308.

Purchased this last year and put a box of ammo through it. With the 3 round test group it has 23 rounds on it.

Nothing wrong with the rifle. Only imperfections are from me taking it out of the safe, it sliding over and knocking another rifle over.

I’ll send the test group pics if you PM me. You can get my cell via PM too.

It’ll ship in the case it came in.

$7000.00 USD shipped and insured.