So Defiance magnum bolt face is .550, but the 300 PRC case base is .534.

A .016 tolerance seems high to me on paper, but I obviously could be wrong. Is this ok for a standard bolt face vs. the 300 PRC case? Am I being too precise, or is this normal?

Looking for 16-19” DT barrels. Whatcha got??

Selling a full precision rifle setup, chambered by Butch’s Guns out of Woodward, OK, and built with premium components. Rifle is used but in good shape. Current barrel has ~1300 rounds on it. Prefer to sell complete, but will consider parting out if the action and barrels go first. Stock is listed separately.

---

Build Specs:

• Action: Deviant Defiance
• Barrels:(2x) Bartlein
  • Current barrel: ~1300 rounds
• Trigger: Trigger Tech Diamond
• Stock: Foundation MG2
• Bottom Metal: Hawkins M5
• Weight Kit: Tungsten
• Magazines: 1-AI 5 round, 1-Accurate 5 round
• Scope: Razor Gen II 4.5-27 EBR2C
• Mount: Vortex PMR
• Bipod: Accutac BR-4
• Brass: 350+ Lapua
• Bullets: 750+ Nosler RDF 140s
• Will not come with TBAC brake unless buyer wants to pay for it.

---

$5499 shipped

• FFL to FFL — shipping included (CONUS).

Payment: Venmo, PayPal F&F, USPS MO (buyer covers fees if any)
Location: Central Oklahoma

I am looking to sell My Accuracy international ACMC .308 Winchester barrel. It is 18.5 inches long 1-10 twist 5 groove Proof Research barrel chambered by Win tactical. I purchased this barrel from Mile high and had it coated FDE. it is brand new. The round count is 0! I am asking $750.00 shipped. I would like a 24 inch 308 barrel if anyone would like to trade.

Benchmark Sendero Light 257 Carbon 1-7.5 twist 24” 725$ firm shipped …

I have these new in pack OBI units and will not use. So &135 shipped.
Pm with questions

Absolutely like new, comes with everything from Leica.

Planned on using it for deer hunting, but 5x is too much on the low end for my purposes.







$1625 shipped.

ETA: Would trade for the same scope with PRS reticle, or maybe an Amplus6 2.5-15x56 or Zeiss V4 3-12x56 illuminated + cash.

I have a Bartlein M24 257 blank 8.25-7.25 twist SS 27” long, cost 480$ and 8-10 months, yours shipped (I ordered a few, one too many, my 25-47 likes other great with heavy Bergers)
Yours shipped 425$

Tl;dr: Looking for an alternative go fast reticle/scope to the Athlon 2-12

I was settled on an Athlon helo 2-12 for a dmr scope for gun runs, dmr and a few PRs matches but all the mil versions are out of stock everywhere with estimated replacement of Oct 25.

It looks like a gen 3 razor 1-10 has a similar reticle but at 3x the price and I’m worried about FOV during PRS. There is a Leupy mk 4hd 2-10 in the classifieds with a good price but tmr reticle.

NF nx8 line can be had reasonable, but again lacking that useful reticle at low magnification.

Any thoughts at around $1500 or less?

For sale are 6 HRD BR/BRX/Dasher AW/AX/ATX Magazine Kits

(3) Lightly Used $140 Shipped!

(3) BRAND NEW $160 Shipped!

Or buy ALL 6 for $285 Shipped!

EDC x9 3.25 inch barrel it’s been fired 120 times comes with everything in the picture the box is the original box it came in $2200 obo.price drop $1800.

Super sniper 22 inch barrel comes with everything in the picture it’s been fired 60 times.$3200 obo. Price drop $2800

Not too picky, just needs those specs for my AXMC. Spuhr, Leupold, MDT, or whatever else. Let me know what you have.

My wife gave me the go ahead to build a PRS rifle so I can’t afford to screw this up lol. This is going to be a buy once cry once scenario. I saw the Spuhr SICS in person at Mile High and really liked it so I feel pretty confident about using that for the chassis. The ACC Elite would be the other option I would consider.

The big question I have is what action to use? The three that interest me are the CDG, 737r or Fuzion. I currently reload for 6.5 Creedmor and plan to stick with it or another .308 bolt face cartridge for the foreseeable future. I will definitely be using a trigger tech diamond. Not married to the idea but would like to use AW magazines. I’m also planning to use mostly prefits. All that considered what are your thoughts?

I had a post about this in another thread but I wanted to start a new to not clog that one up.
Link to it is here. https://www.snipershide.com/shootin...ulator-currently.7220249/page-2#post-12096484

So here is my current DOPE setup for the Range. I think it's ready to test. It's a Zero 2W running HTML server so you can pull up web pages (and images such as .jpg and .png) as reference in a browser. I can pull it up on my phone and when at the range I can run it headless (power cord only). I have other programming and advanced custom ideas coming up for this build. Anyone else making their own stuff? Its not really a calculator yet but kind of falls in that line or will eventually. My only regert so far is not using a primer cardboard spacer board as it should fit almost perfectly.

looking for a chad muzzle brake

preferably a black dlc 3/4 thread 6mm

open to others....

Been a long time lurker of the forums. Only recently started getting back into Long range rifles and having fun with them since moving from CA to TX. Spent a majority of my time with handguns. Working at Fowler Industries so primarily messing with the D/S 19/2011 platforms.

I have a Benelli M1 super 90 that is stamped with H&K. I still have the box and I never use it. Originally was purchased for helicopter hog hunts but don't use it anymore. I am asking $1,100 plus shipping.

I have a very lightly used LS-M6TR for sale. This three-in-one laser aiming module has:

Visible green laser
Invisible IR laser
Invisible IR illuminator with adjustable beam width

Output Specifications:
Green Laser (Wavelength) – 520nm
Green Laser (Power – Low/High) – 3mw/10mW
IR Laser (Wavelength) – 830nm
IR Laser (Power – Low/High) – 0.7mW/5mW
IR Illuminator (Wavelength) – 830nm
IR Illuminator (Power – Low/High) – 5mW/30mW

This thing is fantastic for the price. I just don't shoot at night much anymore.

I have 2 different pressure pads, you can pick which one you prefer.

$800 shipped.

I am selling a Thompson Center Pro Hunter in .280 Remington with Vortex 6-24 with a .243 barrel & 22-250 barrel.($1,600) I also have a Ruger Vaquero with a birds head grip stainless in .45 LC ($1000)

LMT MWS H Quad Upper - $800 Shipped
Login to view embedded media

I am about to upgrade my Leica HDB's to a newer unit. The ranging on close targets less than 100 yards can be a bit off depending on how reflective the target it. I will get a few yard difference ranging a Morrell field target bale (big round flat target) or ranging the water-resistant target faces that are pretty shiny. They will be used mostly for ranging 3D targets, which all the Delta/Mckinsey 3D targets seem to have about the same sheen. My sons Sig Kilo 6k's do not do this, they are much more accurate at ranging, glass is just no where near the Leica glass. Having a RFB that is more accurate than the older HDB can mean the difference in catching a 12 or dropping into an 8 or a 10. So I am looking at the Sig Kilo 10k Gen2, Leica Pro 10x42, or the Vetronix 10x42. Does anyone have experience using them for archery ? Or even just playing with them at close range ?

THANKS!

Selling a new never used Ops Core bump helmet. Size medium, ranger green with the vented lux liner. Will come with its original box, user manual. Kind of a spur of the moment purchase and have no need for it.

Asking $425 shipped or best offer

Foundation Stock MG1 Light
Impact RH S/A
KMW Bottom metal included
Arca rail
Brass weight kit 3/4 of them installed 4 extra

Pillar bedded by Joe Walls while at Exodus

$1250 shipped

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.

Rotapoint WGT34 Watch Cap Offset RMR Footprint, Right Hand, Black, 34MM WGT34-BLK - This works on Geissele Super Precision and Reptilia AUS mounts - New - Sold

More info here: