GA Precision .308
Surgeon 591
Obermeyer 1:11 M24
Timney trigger
KMW Sentinel bedded by GAP
KMW bottom metal
Surefire Brake MB762SSAL/RE
AI 5 round mag

Round count is 1929, this thing is a hammer, plenty of barrel life left.

SOLD

Site has a 48 hour bump rule. Do not bump before then again on any of your ads or they will be deleted and you will be banned.

WTS: JAE +6” ARCA Rail, brand new, comes with all factory screws, never used. 100 shipped to your door.

Need some help deciding for my youngest boys first rifle.

Average 9 yo. Looking for a gun he can grow with that isn’t a POS

Narrowed down to two but willing to hear out other suggestions.

Trying to keep it under $750

He will be using it for target shooting, small game hunting.

Choice 1

TacInc 10/22 left hand receiver & bolt, Kidd ULW barrel, Blackhawk axiom stock (have gift card to cover that), trigger group (got to shop around). This gun is super modular and can be upgraded as he grows. Stock should fit him and the entire gun should be light enough for him to shoot.

He likes semiauto - who doesn’t

Choice 2

CZ 457 scout + Acculite/whistlpig 16.5” fluted, threaded barrel, aftermarket boltknob. The barrel channel will need to be sanded out on the stock. Don’t know if the stock fits him though. Should be pretty light.

he can use a bolt action and it will make him choose his shots. Not quite as fun as a semiauto especially when jackrabbit hunting.


The cz would be the easiest and cheapest but is that really the best option?

Bought my oldest a RPRr and it has been accurate but picky on ammo sticking and it was heavy.

Could get a new Ruger carbon but I’m not sold on Rugers accuracy and their triggers have been crap imho.

I've got a Bushnell Elite Tactical 8-40x60mm LMSS2 spotter with the Horus Tremor 4 reticle that I've never used. The box has some scuffs but the optic is immaculate. $1450 shipped.

EOTECH HWS EXPS3-0 and G45 Tan magnifier combo. New in box. Decided I want to go with a Elcan. $1000 OBO shipped for combo. Or $550 OBO for HWS, and $450 OBO for G45. Zelle or USPS MO. Thanks.

I'll probably get flamed to death for using the word "lapping," but here goes.

I was putting some rings on an Athlon scope for a squirrel .22 tonight. Like a lot of rings, these have 4 screws each on top. That means it's possible to have all 4 corners of the caps at different heights, and there is no way to measure their heights accurately.

So if you get in there with your lapping tool and get everything true, and then you take the screws out, put the scope on, and put the screws back in, how is it possible that you will get the caps back on exactly as they were before you lapped them? If you can't, isn't it pretty likely you'll throw off all your lapping work?

This looks like a softball for anti-lappers.

Have this gently used B9R DS gen 2. Has the bull barrel now and improved trigger and rail. Comes with two mags, OEM case x300T, EPS Full Size 6moa and a level 2 retention holster from KT Mech in M81.

Approximately 800 rounds down the barrel, bought it for Limited Optics in USPSA but just not for me. Please let me know if you have any questions.

$950 to me

Selling a Knights Armament SR-15 16" rifle with the MLOK handguard. This deal also includes everything pictured. The rifle is in unfired/new condition.

Asking $3300

Located in Rockwall, TX (DFW area). Would prefer a FTF here in Texas.

Trade interests include SR-16 KAC uppers, KAC parts, MKII marked Schmidt & Bender or Schmidt & Bender with AI caps, Accuracy International rifles, etc.

Anyone make an assortment of lengths of 6-32 torx head rmr screws ?


Ideally long short and everything in between.

Zero Gravity 1.7” FDE Mount (34mm). Excellent condition. $265 shipped.

If you don't know anything about them, look here.

Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

Trades (+/- Cash):
-DD RISIII FDE Rail (10.5")
-Lilja 5.56 AR Barrel
-Audere H25 Scope Link Rail
-A.R.M.S. #18 M1A Mount
-Quality Handguard 10.5”-11.25”

Hi everyone,

I’m currently developing loads for my 300 Norma Magnum using 250gr Hornady A-TIP bullets and Winchester StaBALL HD powder. I’ve attached some data from my recent testing, specifically at 80 grains of StaBALL HD powder, but I’m not achieving the standard deviation (SD) numbers I had hoped for.

Summary of My Data:


• Bullet: Hornady 250gr A-TIP
• Powder: Winchester StaBALL HD
• Charge: 80 grains

• Results: SD higher than desired, inconsistent velocities. Between 12-18.

Given these results, I’m seeking your experiences and recommendations:


1. What powder charges and powders are you finding successful for low SD and consistent velocities with the 300 Norma Magnum, particularly with heavier bullets like the 250gr A-TIP?


2. Has anyone compared StaBALL HD directly with H1000 or N570 in terms of consistency, velocity, and barrel erosion? What were your findings?


3. I’m also concerned about barrel longevity and throat erosion. How has StaBALL HD impacted your barrels compared to known powders like H1000 or N570?

I appreciate your insights, recommendations, and any load specifics you are comfortable sharing.

Thanks in advance!

LMT 16 inch SS
$2650 plus shipping & Insurance

So I’m venturing into the foray of red dots on handguns.

Picked up an XD-M Elite in 10mm with the OSP plate.

Decided on the Holosun 509T.

Ordered “Plate 3” from Springfield and it arrived in three days.

When I called Springfield (they’ll send you one plate for free) to place the order I was told 6-8 weeks.

Well, I have two new toys in my possession and I’m not about to wait that long. So, I placed an order for one also.

That one showed up today. (Three days door to door. Well worth the $35 to not have to wait up to two months.

I went to put the plate on, and something didn’t look right.
I double checked my order with Springfield. Yep, plate three. Viewed the plate online, yep, looks the same.

Little did I realize, I need to mount the plate that came with the Holosun, to the plate that I ordered from Springfield. (And file the screws to mount the Holosun down because the Springfield plate is so thin the screws would bottom out on the top of the slide.)

Now, I was under the impression that when I ordered the plate from Springfield, it would be dovetailed to fit the Holosun.
Well, that would be too easy.

Cowitness? Not today. The 509 has probably better than 1/4” between the base of it and the top of the slide.

Rant over.
Anyone know where I can get one plate that both screws to the slide of the XD-M and is dovetailed to mount the Holosun?

Looking for a

BipodeXt ELR Max​

New brass 200 count
$175 plus shipping

Foundation centurion with vudoo bottom medal and arca rail also includes fore end weights 1200 shipped. Pay pal ff or venmo

Wanting to buy a descent 22, for general plinking and to have a cheap training/fundamentals gun. Currently have a savage 93/17 in it use, not very accurate, but going to pillar bed it to see if it helps. But really want a nice bolt 22, all I have right now is a couple 10/22s.

Option 1
Bergara b14r a little heavy, but I'm a big guy, most expensive out the gate. Lot of stock options if I don't like it, find something on the px

Option 2
Bergara bmr-x a little lighter and cheaper, doesn't have an adjustable cheek riser, I'm sure i could put something on it

Option 3
Tikka t1x i would probably throw it on a krg bravo, so it would end up about same price as b14. Not sure what this setup would weigh, I'm sure some one has this setup could tell me, currently leaning in this direction.

I have a Vortex Fury HD 5000 AB 10x42 NIB and still in plastic wrapper. $1250 shipped.

.

XLR Envy Pro Chassis for REM 700 Long Action AICS (ambi) Black with weight kit. Never used. Comes with box and papers/action screws.
Specs:
C-6 Stock
Bag rider
Carbon grip
Thumb rest x 2
Side weight kit
$1560 new
Asking $1100 shipped

*Will Split Action/barrel if interested* Left Hand Impact 777. Barrel chambered in .300 PRC by Blue Mountain Precision. 26” M24 profile threaded .233 FB. Never fired. Will throw in MDT 5 round .300 PRC mag if you want. Asking $2100 ~~$2000~~ shipped.

1) As several have suggested, I am trying fine media after sizing brass. I went with “fine” 24 grit from Harbor freight and it still gets stuck in my 6x47 L brass flash hole. Not many - maybe 15 out of 300, so not a real big deal, but I still have to check every one of them. Is there a better choice of media or is the Lapua flash hole just so small or is Harbor freight stuff poor quality?
2) My Lyman 1200 tumbler lid doesn’t seal well anymore (It is pretty old) so even with dryer sheets I am getting dust on the floor. Does the Berry QD-500 seal very well?
3) for those using fine grit, I assume you still wipe it off the exterior before proceeding to load?
Thanks!

***SOLD***Selling a NF ATACR 7-35 Mil-C F1. This is a catch and release. Bought from Hide member “1260” and used for one match. Only selling because I have too many scopes! Minor scratches and wear, espically around the eyepiece (pictured). Glass clear. Missing windage cap and objective covers. Selling for PRICE DROP $2100.

Area 419 34mm 1.54” mount with normal height diving board and box - $300

Anyone messed with this type of case? I’m really curious if theses cases can be necked up or fire formed into 223ai?

For sale is a Tikka CTR barrel cut to 16.5” and threaded to 5/8-24. Has about 200 rounds total on it. Bought on here and hunted with it this season, but putting my Tikka back to 7PRC config, so selling my barrel and bolt. $200

Standard Tikka Bolt that has been fluted by LRI, It also has an anarchy outdoors bolt handle as well as badger ordinance bolt knob $375 SOLD

One mag is a metal mountain tactical long action mag for the tikka inlet. $50

One factory medium mag (6.5 creed, 308, etc.) $35 SOLD

All prices are shipped, If you're in Texas, I live North of Austin.