As new. 1030 shipped.

SOLD, Selling a set of 36mm ARC M-Brace (Low 24mm) Scope rings. $$ shipped to the lower 48.
PayPal F&F for the form of payment.

WTS/WTT: Brand new black MDT JAE Gen 5 for Rem700 clones, SA, RH, box, arca rail, 2 grips, dowels and even literature included. Price is 1325 styd, this is basically the factory price but you save Taxes, shipping and most importantly, the 10-12 week lead time. I had ordered this chassis back in late December and just received it but I’ve gone a different path with the specific BA I wanted to use with this chassis.

Also open for trades:
-MPA Matrix Pro II, for SA Rem700, preferably in black, gray or tungsten… depending on accessories and state I could add some cash if we determine it’s needed.

Noveske 16” 308 Barrel with a 1/10 twist and Muzzle brake is a FCD keymo brake, Noveske Gas Block and gas tube that was matched and fit at Noveske. Noveske also matched and headspaced the barrel with the Noveske Dual ejector bolt carrier group when assembled at Noveske. Also included is the Noveske ambi charging handle. I’d like to sell this together. $700 buys it all which is a great deal!

Like the title says. Ideally NIB, but don't mind something gently used either.

If you don't have Positive Trader feedback here will need verification and only pay through a buyer protected method.

Xylo with forward optics mount. Comes with multiple lug clamps. 950 obo shipped. Partial trade for optics (Zeiss s5, kahles, S&B)

EBR2C reticle. In excellent condition. I bought this a little over a year ago on here. Mounted it on a rarely used gun I am moving. Nice scope but won't have a home any more. MKM scope covers and Vortex power lever.
$1025 shipped. SOLD

Selling radian raptor charging handle. Ar15/m16. Brand new never been open. $75 shipped

Selling 164 pcs of 1x fired lapua SRP brass. Sold my last 6.5 I could use these for.

Roughly 150 pcs cleaned and prepped, 14 or less haven't been processed.

$170 shipped

PP or venmo.

Looking to offload my Desert Tech SRS M2


Its in 6.5 CM and has approximately 40 rounds through it, all of it being suppressed. Attached is a surefire flash hider and will come with a soft bag, tools and paper are included as well.

I understand I am a new poster and can verify information if need be.

EDIT: Looking for $4900 OBO. Reason for sale is realized that the bull pup platform as cool as it may be, is not the one for me. Thank you

Black MDT ACC Premier chassis for Rem700SA right hand. Includes rear bag rider. It's in good shape overall, but it is used, so it does show minor signs of wear in the predictable areas like the ARCA rail and other high touch surfaces. $675 shipped to you in the lower 48. PP F&F or Venmo.

Hey guys , I moved a few years ago (to the humid south) and finally am getting around to building a new reloading/ work bench.

I have gotten a butcher block to be the top of my bench, but I'm not sure what I should finish or seal it with ? The block is unfinished so I will sand it and want to seal it with something that will withstand the humid climate.

Any ideas on what works best ?

I am selling a daniel defense dd5 v3 ar10 upper chambered in 308 with bcg and charging handle . It's got the 16 inch barrel and adjustable gas block. I have fired approximately 50 rounds through this upper suppressed with a dead air nomad 30 cal can and it has functioned flawless. I have gotten sub moa groups using sierra match grade ammo. I will include the dead air xeno muzzle break.

$1200shipped.

Parting this rifle — Element 4.0 magnesium carbon fiber grip/ folder /etc. $1200 shipped
Chassis only.


Trades added
Matrix chassis
Actions-
Barrel blanks
Athlon cronus mrad
Burris xtr pro mrad

Shoot me offers

Looking to sell my Bergara BMR X in 22LR. I’m making the switch to left-handed rifles, so I no longer need it. It might have 200 rounds through it. It shoots phenomenally well for the price point.

- Bergara BMR-X Steel 22LR (RH)
- Dependabilt Arca Rail w/ Hardware
- 4 Magazines (3) 10 round & (1) 5 round
- L3i Mag Block

* I have the original box and all paperwork *

* Freshly cleaned up with BoreTech C4 & lubed with CLP *

$700 OBO

Below you will find some items for sale that are broken down into separate lots for ease of organization. All photos are attached to this post! PM me with any questions.

SOLD! Lot 1: Asking Price $125 Shipped
Masterpiece Arms - MPA BA Internal Weights
Gray Ops - MPA BA External Weights (6 Weight Kit) Gray
All hardware is included.

Lot 2: Asking Price $150 Shipped
Misc Brand (Mostly Hornady but some Federal and Lapua) 1x Fired 6.5 Creedmoor Brass - Cleaned and Bagged
Qty of about 275-300 Cases - Unprimed


View attachment IMG_5343.jpg

Sold 250.00 shipped , used

ACCU-TAC FD-4 ARCA SPEC QD BIPOD WITH EXTRA SKI FEET​

This version is quick deploy so no 45 forward available, regular positions of collapsed,vertical and 45 aft.

Great condition with some wear mostly on the bottom of ski feet and inside arca clamp.

Like new Bix'n Andy Trigger:

• TacSport X
• Remington 700
• Top Right Safety
• Single Stage
• Gator Shoe

SPF

Paypal F&F preferred/Check/M.O./Zelle

Bought this a few years back, but never finished the build.
Rem 700 RH SA Fully Trued and Blueprinted by TS Customs, Brux #3 8-Twist 24" barrel, Timney Trigger, finished in black Cerakote. Would make great hunting rifle for a youngster.

$1200 plus shipping to your FFL. Your dealer must take shipment direct from private party.

I purchased this rifle new from Ashbury Ordnance back when they were making the Sniper’s Hide rifle. It started out as a Saber model.

Bought it as a hunting rifle and didn’t like the chassis for hunting. Put it in a Bergara HMR stock and sold the chassis.

I have the original box where the serial number on the box matches the rifle’s serial number.

Rifle shoots great with 130 and 123. Never tried any 140s.

Comes with what you see, and will ship in the original box. It has a Seekins 0 moa pic rail, and a threaded handle insert was installed. Has original factory trigger.

Putting the funds towards a custom build and priced to move at $650 shipped/insured.

Sold my knife. Sheath is $25 plus $10 for the ride. Prefer discreet PP F&F.
Color is off in pics. Its close to color in pic with knife inserted.

this is just a last ditch effort after helping my 20 Y/O look for a summer internship this summer. apparently, 90% of getting one is who you know. I am a long time member on this forum, as well as accurate shooter, ARF, and long Range hunting.

I am 60 y/o retired fire captain, NRA member, native Nevadan and member in good standing at both my local shooting ranges here in Las Vegas, (Boulder rifle and pistol club, and Desert Sportsmans Rifle Club)

my son attends Rensselaer Polytechnic Institute in upstate NY. His specialty is cybersecurity, robotics, and writing code, including AI code. He is just finishing his sophomore year. He is exceptionally smart with a composite 130+ IQ and has done some amazing stuff with computers. he is not a gamer. his social skills are currently under construction.

If anyone is in a position to get his resume into a recruiters hands at ANYPLACE where they have comp sci, comp engineering, robotics, AI, cybersecurity, or IT internship programs, please feel free to pm or even email me at [email protected]

just to be clear,, ANY summer job, ANYWHERE, in his field, whether remote or in office, is fine, apparently, getting a summer internship aka summer job, is very important for these college students these days.

no need to make fun of me, I know this is a long shot and not the typical place to ask. yes, he/we have put in hundreds of applications online.
attached is his resume if anyone can forward it
crossposted in another forum as well.

I have been trying to get in touch with Braden at Custom Gun Coatings. @Short-bus

I have emailed and sent PMs.

Does anyone have a phone number or some other way to get in touch with him?

One is a weighted steel bag rider the other is lighter aluminum.

No idea what they cost so let’s go

$45 the aluminum
$60 for the weighted one

$90 for both

Zelle or cash app