Finished my rifle finally.
Defiance AntiX short action (medium)
Proof prefit 7 SAUM
HNT26 folder
Triggertech Diamond
Muzzle break gets changed around as I haven't found one I absolutely love yet.
Defiance AntiX short action (medium)
Proof prefit 7 SAUM
HNT26 folder
Triggertech Diamond
Muzzle break gets changed around as I haven't found one I absolutely love yet.
Archimedes
1:7 Bartlein 6x47
TT Special
JAE700
Gen 3 Razor (I know, color is gonna mess up the scheme) and MBrace mount to come.
1:7 Bartlein 6x47
TT Special
JAE700
Gen 3 Razor (I know, color is gonna mess up the scheme) and MBrace mount to come.
6.5 PRC
24” Proof CF
Manners LRH
Defiance Ruckus
Triggertech Diamond
Built by RIP Precision
All parts from Sportsman’s Finest
I love the rifle and camo pattern, but what’s up with that butt-plug bolt handle?
Chris
The mind sees what it wants to see I guess *shrug*
I use pink feathers on my crossbow arrows. It's a color that is easily distinguishable in the fall woods. So when it passes though a deer I can find it without much trouble.
I get laughed at when I show up at the archery range until they see how well I can shoot. Carry on.
This years paint Job!
Grayboe Ridgeback
Tuebor Legion
Schmidt & Bender PMII
ARC M10 rings
Huber Concepts 2-stage trigger
Rock Creek Barrel in 6mm Creedmoor
TBAC Ultra 9
TBAC bipod
Grayboe Ridgeback
Tuebor Legion
Schmidt & Bender PMII
ARC M10 rings
Huber Concepts 2-stage trigger
Rock Creek Barrel in 6mm Creedmoor
TBAC Ultra 9
TBAC bipod
4 and i think im done, one even need´s an eye in to it
.
Just a moment ago did some dry fire, and the woman of the house asked, was that a new one, last time i saw and it was black
.
She would kill me, if she would knew where have all my salary gone
.....
.Just a moment ago did some dry fire, and the woman of the house asked, was that a new one, last time i saw and it was black
.She would kill me, if she would knew where have all my salary gone
.....
Last edited:
Proof Research - carbon fiber -20” 6.5 CM
Sandman S
Manners LRH - elite tac back in black
M5 mini chassis- Hawkins M5 dbm
Triggertech - special
Full length Arca rail
Vortex Razor Gen 2 - 4.5-27x56 - for now
(Going to swap to a lighter more compact scope eventually - Leupold Mark 5HD 3.6-18)
Rifle without this scope combo and no suppressor weighs 8 lbs
Haven't been to the range in a month. Took out a new GAP I picked up yesterday.
Gladius SA, TT Special
308, 18 inch #6, 1-11.25, added a Hellfire Match
Manners Folder
200 Yard Sand Pit, Nice day @ 51 degrees
Bore scoped and Warmed her up into the back stop
First 5 on paper!
Gladius SA, TT Special
308, 18 inch #6, 1-11.25, added a Hellfire Match
Manners Folder
200 Yard Sand Pit, Nice day @ 51 degrees
Bore scoped and Warmed her up into the back stop
First 5 on paper!
You got any T1x's that's all that's missing. Still waiting for them to import the lefty's in 22lr here.4 and i think im done, one even need´s an eye in to it
Just a moment ago did some dry fire, and the woman of the house asked, was that a new one, last time i saw and it was black
She would kill me, if she would knew where have all my salary gone
View attachment 7841259
No, i had CZ455 Varmint, but id like to buy the T1X in 17HMR for hunting, maybe one day.
I'm liking the cheekrest you put on the green Bravo stock. Looks like it would be a bit more slender than the cheekrest that comes with the Bravo. Was it difficult to install?
It kinda looks like the cheek rest from the xray/whiskey3, I would imagine the setup for the rods is identical between the two chassis since they're both krg
it is their rubber overmolded cheekrest, same rod spacing and the long action bolt doesnt hit it unlike the stock one.
Ultimatum Deadline
IBI 6.5x47L 1:8
TT Special
AT Folder with RRS Arca plate and Anarchy spigot/thumbrest
Vortex GenII Razor in PMRs
Badger Mini FTE
IBI 6.5x47L 1:8
TT Special
AT Folder with RRS Arca plate and Anarchy spigot/thumbrest
Vortex GenII Razor in PMRs
Badger Mini FTE
Shot the new GAP 308 again today, 3rd time out with it. About 50 rounds down the pipe. Luckily, I'm only shooting 200 yards, as that poor old 308 wouldn't make it past the 800 yard wall!
Not my normal target, ran out of those. This bullseye is about dime sized.
Not my normal target, ran out of those. This bullseye is about dime sized.
Work in progress.
Savage 11 308
XLR 4.0 Magnesium
Carbon fiber titanium bolt knob
Talley rings
Lane Scorpion 458 can for now until I get a dedicated can
Planning on outfitting it with a MDT Ground pod bipod when they get back in stock.
Savage 11 308
XLR 4.0 Magnesium
Carbon fiber titanium bolt knob
Talley rings
Lane Scorpion 458 can for now until I get a dedicated can
Planning on outfitting it with a MDT Ground pod bipod when they get back in stock.
Picked up a new GAP Gladius on Friday.
MCS TCS, 24 Inch #7 (1-8) 223 Rem
Diamond Pro, Added the Hellfire
Took it to the Indoor 100 Yard Tube Range
Tried some old factory Blackhills 68 gr HP, need to load up some custom ammo for it. Didn't like the factory stuff.
My son shot the GAP 308 Too...
MCS TCS, 24 Inch #7 (1-8) 223 Rem
Diamond Pro, Added the Hellfire
Took it to the Indoor 100 Yard Tube Range
Tried some old factory Blackhills 68 gr HP, need to load up some custom ammo for it. Didn't like the factory stuff.
My son shot the GAP 308 Too...
2 Whiskey-3 gen6 chassis Tikka from Finland.
ZCO on top, both rigs.
ZCO on top, both rigs.
For today something a little different..
GAP BAT VR in 6mm GT (my first bat)
Bartlein 28 inch #8 w/6 Flutes, 7.2:7 Gain Twist, Big Dumper Brake
Manners LRH, Dipped in Kuiu
TT Diamond Pro,
Sandpit @ 200 yards, bore sighted and 3 into the dirt. First five on paper.
This gun is going to be a winner, pleasure to shoot, action is smooth as silk.
Shot off of a Harris and crappy bench even!
GAP BAT VR in 6mm GT (my first bat)
Bartlein 28 inch #8 w/6 Flutes, 7.2:7 Gain Twist, Big Dumper Brake
Manners LRH, Dipped in Kuiu
TT Diamond Pro,
Sandpit @ 200 yards, bore sighted and 3 into the dirt. First five on paper.
This gun is going to be a winner, pleasure to shoot, action is smooth as silk.
Shot off of a Harris and crappy bench even!
Last edited:
New 6gt chambered by @TRPrecision , hammer as always. Custom stock I built from walnut and maple. Ammo box in the works.
Attachments
Can't have a new rig without some new ammo boxes.
Attachments
In fairness I did glass the entire exterior to toughen it up a bit for PRS but I think it turned out nice. If I am gonna shoot poorly, might as well look good doing itOh my, some real wood!
Lovely
A woody while shooting!!!!!
In fairness I did glass the entire exterior to toughen it up a bit for PRS but I think it turned out nice. If I am gonna shoot poorly, might as well look good doing it
Loaded up some 69 SMK with 23 grains of Varget for the new GAP 223 and hit the 100 yard range. MUCH Improved! Gun didn't like the red box Black Hills 68 HP.
Looks to be a 1/4 minute winner
Looks to be a 1/4 minute winner
Impact precision 737R in 6.5 creedmoor with a bartlien barrel chambered by stuteville precision. MPA matrix chassis. Vortex Razor HD III scope
Deviant GA Hunter and 1:8 7RM Carbon6 barrel
New toy ... just back from the gun shop ... weather is lousy so I have to wait to start breaking it in.
Masterpiece Arm 300 Norma Mag in Comp chassis (Midnight Bronze with fore and aft weight kit) with Curtis action and a 27" barrel (MTU contour) ... it's a heavy SOB (by design). Load development starts soon. Fun Fun Fun !!!
Masterpiece Arm 300 Norma Mag in Comp chassis (Midnight Bronze with fore and aft weight kit) with Curtis action and a 27" barrel (MTU contour) ... it's a heavy SOB (by design). Load development starts soon. Fun Fun Fun !!!
Sunny day at the range ment I had to try the new tripod.
Also, not the scope intended for that rifle.
Sako TRG22 with KRG folder and a bunch of other nice stuff.
