Sidearms & Scatterguns Handguns...show 'em
- Thread starter Forgetful Coyote
- Start date
I've lusted after one of those pistols ever since I held one over 30 years ago. I couldn't afford one then.
When SIG came out with their US made P210, I jumped on one after it was on sale at the LGS. It's everything they say about it and more but I don't think it will ever hold a candle to the P49.
I'm extremely envious of you sir. Complimenting you on such a gorgeous specimen would almost be like telling a man his wife is very sexy.
So forgive me for drooling over something that you own that rivals only an evening with a beautiful blonde and a bottle of bonded bourbon.
The 9's. LTT Elite, M18, METE Pro. M18 is the latest addition, did a threaded barrel and suppressor-height sights. Bought it used and really like it. Had to pull the FCU to see if it was 100% stock as the trigger's not half bad for a duty trigger.
Last edited:
I like that slide ceracoat, looks real goodThe 9's. LTT Elite, M18, METE Pro. M18 is the latest addition, did a threaded barrel and suppressor-height sights. Bought it used and really like it. Had to pull the FCU to see if it was 100% stock as the trigger's not half bad for a duty trigger.
Not cerakote. That's actually a "test" run to see if I can live with it before fully committing. I plan on replacing the light gray with a slightly darker than OD green. Looks brighter in the photo than it does in person too. But yeah, I think I'm liking it and it's not nearly as expensive to just have the slide done as opposed to the whole gun.I like that slide ceracoat, looks real good
My 2 favorites, the 1 of 600 LW Colt CC in 38 super, i stole for under $500 new in the box, and is now impossible to find, and the H&K P7 M13. New in the box it was $1100 in 1990 when normal big names were half that, and at the time was considered the worlds most expensive off the shelf pistol. If you ever get the chance to own one, you'll find its quality and accuracy to be undeniable. I recently wanted to aquire another and when I went looking I was speachless to find that poor examples are fetching $2500, and for an unfired example with box and materials they bring as much as $6-7000, ultimatley topping at $10-12000 for the rare .40 cal model in Nickel.
The P7 I have to say aside from the quality is truly the safest handgun you could ever carry, as theres not a degenerate on earth that knows how it works. I used to make $100 bets with people hand over the gun (unloaded and checked) and would agree to pay the hundred if I could snatch it from there hand before the could dry fire it, and i'd win 90% of the time. Most amazing is that even my cop friends had no clue. The safety is that if someone gets it from you, your odds of getting shot with your own weapon are pretty close to nil.
The P7 I have to say aside from the quality is truly the safest handgun you could ever carry, as theres not a degenerate on earth that knows how it works. I used to make $100 bets with people hand over the gun (unloaded and checked) and would agree to pay the hundred if I could snatch it from there hand before the could dry fire it, and i'd win 90% of the time. Most amazing is that even my cop friends had no clue. The safety is that if someone gets it from you, your odds of getting shot with your own weapon are pretty close to nil.
Attachments
How is that Whiskey? Obviously the bottles aren't open....
One bottle down! Wish I could get another two bottles. Vary smooth!
Handmade “5.56 AR 15 Pistol Kit - 10.5” Nitride Barrel, 1:7 Twist Rate with 12” Slant M-Lok Handguard” 26” overall length.
Just got in my John Wick comp for my P30L from wicked comp. Just loosely screwed it on without timing it. It goes along with my 2011 Combat Master and my G34 Combat Master.
Stumbled across this Wilson Combat P320 X-Carry with the Gray Guns action tune and a WC OWB holster at the LGS today and the price was too good to pass up. Apparently the orginal owner ordered it, shot it very little, and decided he needed a smaller gun and some cash quick. Took it home for half price and I'm kind of digging it!
Last edited:
Christmas Sig! Been curious about the P322 so I grabbed one and stuck it under the tree! 
I was a good boy this year! Nighthawk Custom TRS Commander with IOS.
Beautiful firearm, sir! I am soooo tempted to pull the trigger on a Sandhawk to add to the collection! As for being a good boy this year... Based on Nighthawks lead times I would say you were a good boy last year too!
Finally got my slide back from CHPWS yesterday. Hopefully get to shoot it and sight in the dot tomorrow (if I can snag some time away from family in town for the holidays). Just need to get my Norsso low cowitness black sights installed, and it’s all set to prove it’s worth as an EDC.
Sig P365xMacro
TLR7A
RMRcc07
Sig P365xMacro
TLR7A
RMRcc07
Jeez another one?!? Mask #2 got out of jail today and I grabbed a new host while I was at it. Threw a few spare parts on it for giggles and think it will make a fine plinker. Gotta say the FN 502 is one substantial 22!
Agency Arms Sage Dynamics Glock 19x
Agency Arms x Sage Dynamics Glock 19X V1 OD Green
Agency Arms has teamed up with Aaron Cowan of Sage Dynamics to design his signature series of pistols. @ The Agency Arms Glock 19X Sage Dynamics V1 pistol is unmatched in visual appeal with a custom design that excels in functionality and performance. Based on a Glock 19X frame, this striker...
Once I saw that they were shipping on social media, I asked my local dealer if he could track one down, had my hands on it three days later. Assuming that the first production run started at SN: X2200000, this particular example is pre 500
Early Swiss SIG P210-2 w/ box, booklet and two sets of grips.
Oh my goodness......looks like a treasure trove of Smith & Wesson goodness.....
Greetings. I thought the rules required respect. The use of the Lord's name is a shock to me. Thank you.
Dredging up a post from 2017 to assert your own Godliness is certainly one way to join the internet for the first time.
I can’t wait until you find out there’s a member named @Bigfatcock
Is that a Ruger MKII with a bunch of gunsmithing or did you get a more modern one? I looks awesome, I was looking at a mark IV because I like the idea of them being easier to disassemble/reassemble, but the ones with rails look so bulky.
It’s a mk IV. I had ADCO cut it down (3.070”) thread it and reattach the front sight. They did a great job.
Highly recommend the mkIV. Much nicer to maintain.
Primary Machine did the slide milling for the SRO with black nitride slide. Took advantage of the Black Friday sale, they got it back to me in 4 weeks!
Gun is a CZ Custom Accushadow 2. LOK Grips, mag release, and magwell.
Gun is a CZ Custom Accushadow 2. LOK Grips, mag release, and magwell.
Similar threads
