• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Spuhr SP-4602 Discontinued

SpeedDrop

Sergeant of the Hide
Minuteman
Jan 23, 2019
112
142
TX
Have spoken to Mile High and EO and it seems this mount is discontinued. Only comparable model seems to be the SP-4602c with a smaller back ring. Four screws compared to six.

Diameter: 34mm
Height: 38mm/1.5”
Cant: 20.6 MOA/6Mil


Has anyone used the 4602c or similar Spuhr mount with the smaller back ring and noticed any issues with larger calibers (e.g. 300 NM, 338 NM, 338 LM, etc.)?
 
Have spoken to Mile High and EO and it seems this mount is discontinued. Only comparable model seems to be the SP-4602c with a smaller back ring. Four screws compared to six.

Diameter: 34mm
Height: 38mm/1.5”
Cant: 20.6 MOA/6Mil


Has anyone used the 4602c or similar Spuhr mount with the smaller back ring and noticed any issues with larger calibers (e.g. 300 NM, 338 NM, 338 LM, etc.)?
I run basic Mark 4 rings with only 4 screws on my 300 WM. No issues. This being a full mount should not have any issues whatsoever. I think this is the new design for the Gen 3 mounts. Its what I see them labeled as with all retailers that carry them.
 
  • Like
Reactions: SpeedDrop
Been running the C versions on a few guns for a while. Don't notice a difference. I turn the smaller cap around so it doesn't extend back on the scope. Just purely a looks thing but these new mounts work just as well.
 

Attachments

  • 20230205_091545.jpg
    20230205_091545.jpg
    339.9 KB · Views: 376
  • Like
Reactions: SpeedDrop
Have spoken to Mile High and EO and it seems this mount is discontinued. Only comparable model seems to be the SP-4602c with a smaller back ring. Four screws compared to six.

Diameter: 34mm
Height: 38mm/1.5”
Cant: 20.6 MOA/6Mil


Has anyone used the 4602c or similar Spuhr mount with the smaller back ring and noticed any issues with larger calibers (e.g. 300 NM, 338 NM, 338 LM, etc.)?
Yes mine had a hairline Crack across the bar from a 300 norma magnum. Ran fine with everything else.
 

Attachments

  • 20230311_143410.jpg
    20230311_143410.jpg
    503.9 KB · Views: 246
  • Like
Reactions: SpeedDrop
You must be at least 18 years of age to use this site
You confirm that you are at least 18 years of age by continuing to use the site.