• Win an RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below! Subscribers get more entries, check out the plans below for a better chance of winning!

    Join the contest Subscribe

SOLD MDT HNT26 chassis

mustang-cars

Private
Full Member
Minuteman
Jul 6, 2017
885
328
SPF to @LC 6.5 Shooter
MDT HNT26(Remington SA inlet)
Non folding
Full Arca rail model
All hardware these normally come with included. Original box included
I did use this in about 6 NRL Hunter matches so there’s some bumps and bruises.
I also ground down the length of the 2 furthest forward screws that hold the forend to the chassis as they were coming in contact with the barrel shank causing POI shifts.
$1,050 shipped
IMG_0180.jpeg

IMG_0181.jpeg

IMG_0182.jpeg

IMG_0183.jpeg

IMG_0184.jpeg

IMG_0185.jpeg

IMG_0186.jpeg

IMG_0187.jpeg

IMG_0188.jpeg

IMG_0189.jpeg
 
Last edited:
What barrel profile did you use with this? Curious how manageable it would be on a bag with a carbon proof sendero when needed.
I actually have 2 of these. One is on my hunting rifle. That rifle wears a Benchmark CF sendero barrel and the whole rifle weighs in at 8lbs. Is in 7SAW caliber which is just a 7mm-08 basically. It’s very manageable. Although I’ll admit I don’t shoot that one positional very often.

This particular chassis was on my NRL Hunter rifle. I have a medium Palma 26” barrel on it in 6.5CM in the open light class. I placed 2nd overall at one of the larger NRL Hunter matches last year with it. That setup is extremely manageable from a bag.
 
  • Like
Reactions: JLP83