.338 lapua Magnum primers
- Thread starter A14
- Start date
Re: .338 lapua Magnum primers
215Ms, but I've used 215s and Winchester LRM primers.
I prefer the 215Ms if for no other reason than I sleep better at nights, using them.
Chris
215Ms, but I've used 215s and Winchester LRM primers.
I prefer the 215Ms if for no other reason than I sleep better at nights, using them.
Chris
Re: .338 lapua Magnum primers
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ChrisGarrett</div><div class="ubbcode-body">215Ms, but I've used 215s and Winchester LRM primers.
I prefer the 215Ms if for no other reason than I sleep better at nights, using them.
Chris </div></div>
Haha, I hear you. Thats the kind of feedback I need though! I figured it was kinda a glock vs 1911, both will work its just what you prefer. It is however always nice to hear what everyone is using. Thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ChrisGarrett</div><div class="ubbcode-body">215Ms, but I've used 215s and Winchester LRM primers.
I prefer the 215Ms if for no other reason than I sleep better at nights, using them.
Chris </div></div>
Haha, I hear you. Thats the kind of feedback I need though! I figured it was kinda a glock vs 1911, both will work its just what you prefer. It is however always nice to hear what everyone is using. Thanks
Re: .338 lapua Magnum primers
I can tell no difference between CCI, 215M, and WLRM. All shoot just fine, I just happen to have a lot more WLRM,s, so they are what's used.
I can tell no difference between CCI, 215M, and WLRM. All shoot just fine, I just happen to have a lot more WLRM,s, so they are what's used.
Re: .338 lapua Magnum primers
215m, only because tula magnums were giving me hang fires but now its all good.
215m, only because tula magnums were giving me hang fires but now its all good.
Re: .338 lapua Magnum primers
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: A14</div><div class="ubbcode-body">
I figured it was kinda a glock vs 1911, both will work its just what you prefer. </div></div>
Hey now, I wouldnt go that far. More like Springfiled XD vs Glock.
GM215M's here as well. Only complaint, on new Lapua brass I have to use a primer uniformer to get them to seat below flush. I think the cups on the Fed are a bit deeper then the CCI's.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: A14</div><div class="ubbcode-body">
I figured it was kinda a glock vs 1911, both will work its just what you prefer. </div></div>
Hey now, I wouldnt go that far. More like Springfiled XD vs Glock.
GM215M's here as well. Only complaint, on new Lapua brass I have to use a primer uniformer to get them to seat below flush. I think the cups on the Fed are a bit deeper then the CCI's.
Re: .338 lapua Magnum primers
For some reason the CCIs did not work well at all for me in my 338 LM. Using the Federals with the same load works great. I was surprised because CCI primers work great in my 6BR benchrest rifle.
For some reason the CCIs did not work well at all for me in my 338 LM. Using the Federals with the same load works great. I was surprised because CCI primers work great in my 6BR benchrest rifle.
Re: .338 lapua Magnum primers
CCI large rifle mag primers. They are the only thing I can get to work.
CCI large rifle mag primers. They are the only thing I can get to work.
Re: .338 lapua Magnum primers
Federal, I get 15 to 25 more FPS than with CCI YEMV
Same powder, same brass same bullet.
Jmac2387
Federal, I get 15 to 25 more FPS than with CCI YEMV
Same powder, same brass same bullet.
Jmac2387
Re: .338 lapua Magnum primers
I started with the 215Ms had good luck and never looked back.
I buy in bulk since I use them in my 7WSM, 7 Dakota, 338LM, and 338 LM Improved.
Jeffvn
I started with the 215Ms had good luck and never looked back.
I buy in bulk since I use them in my 7WSM, 7 Dakota, 338LM, and 338 LM Improved.
Jeffvn
