All of those that have a AX Chassis, lets see what you have done to it. Whether you left it stock, or painted it. Post some pics!
AX Chassis- Lets see them!
- Thread starter Jackalope33B
- Start date
Re: AX Chassis- Lets see them!
I have one but unfortunately waiting on the action to arrive.
Gonna be a Defiance S/A, CG jackson trigger, Bartlein 1-11.25 .30 tight M40 contour at probably 22" spiral fluted by Paul at PPR with a Badger FTE break. Going to have Cameron at Murphy Precision custom up a scope base and sending the barreled action to Todd at Phantom Finishing so he can send it to IonBond.
To those that post pics don't forget the build specs/parts list. Thanks! (Tagged)
I have one but unfortunately waiting on the action to arrive.
Gonna be a Defiance S/A, CG jackson trigger, Bartlein 1-11.25 .30 tight M40 contour at probably 22" spiral fluted by Paul at PPR with a Badger FTE break. Going to have Cameron at Murphy Precision custom up a scope base and sending the barreled action to Todd at Phantom Finishing so he can send it to IonBond.
To those that post pics don't forget the build specs/parts list. Thanks! (Tagged)
Re: AX Chassis- Lets see them!
I'm in the same boat, except I have all the parts I need. Just need my gunsmith get the time to work on it. Stiller action, Rock Creek M40 barrel wioth 1/8 twist, got the reamer off ebay for 6.5x47 Lapua. May have the skins hydro dipped digital camo.
I'm in the same boat, except I have all the parts I need. Just need my gunsmith get the time to work on it. Stiller action, Rock Creek M40 barrel wioth 1/8 twist, got the reamer off ebay for 6.5x47 Lapua. May have the skins hydro dipped digital camo.
Re: AX Chassis- Lets see them!
Here is mine. 40X rimfire.
60 shots inside 1cm at 50 meters. The dot is the center of the bullet, not the entire diameter. If you look close you can see the outline of shot 60 at 7:30, 2mm left and 1mm down.
Here is mine. 40X rimfire.
60 shots inside 1cm at 50 meters. The dot is the center of the bullet, not the entire diameter. If you look close you can see the outline of shot 60 at 7:30, 2mm left and 1mm down.
Re: AX Chassis- Lets see them!
The chassis is perfect for me. I like it so much I'm getting another one in black.
The chassis is perfect for me. I like it so much I'm getting another one in black.
Re: AX Chassis- Lets see them!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jAXDIALATION</div><div class="ubbcode-body">The chassis is perfect for me. I like it so much I'm getting another one in black.
</div></div>
What length barrel is that on that surgeon action?
13" or 16" forearm tube??
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jAXDIALATION</div><div class="ubbcode-body">The chassis is perfect for me. I like it so much I'm getting another one in black.
What length barrel is that on that surgeon action?
13" or 16" forearm tube??
Re: AX Chassis- Lets see them!
20" MTU barrel and I think the forearm is 16. It just works so I haven't measured it. The MTU barrel is new for me. But I'm anticipating some really easy reloading because the barrel harmonics should be nearly zero. I'm just changing the seating on my old load and it seems to work fine. I haven't chrony'd the load from the new barrel. I'm guessing I've lost 50fps from my 24" barrel. Thats an estimate based upon how my actual dope changed.
20" MTU barrel and I think the forearm is 16. It just works so I haven't measured it. The MTU barrel is new for me. But I'm anticipating some really easy reloading because the barrel harmonics should be nearly zero. I'm just changing the seating on my old load and it seems to work fine. I haven't chrony'd the load from the new barrel. I'm guessing I've lost 50fps from my 24" barrel. Thats an estimate based upon how my actual dope changed.
Re: AX Chassis- Lets see them!
How's this for something you might be interested in.
Tom Irwin
Accuracy International
How's this for something you might be interested in.
Tom Irwin
Accuracy International
Re: AX Chassis- Lets see them!
That was a sneak preview but they will be available later this year.
Tom Irwin
That was a sneak preview but they will be available later this year.
Tom Irwin
Re: AX Chassis- Lets see them!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: tomirwin</div><div class="ubbcode-body">They are available now
</div></div>
Through dealers or AINA? Thanks for the heads up.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: tomirwin</div><div class="ubbcode-body">They are available now
</div></div>
Through dealers or AINA? Thanks for the heads up.
Re: AX Chassis- Lets see them!
Hoser said:Here is mine. 40X rimfire.
60 shots inside 1cm at 50 meters. The dot is the center of the bullet, not the entire diameter. If you look close you can see the outline of shot 60 at 7:30, 2mm left and 1mm down.
Can you please tell me the specs on the barrel? Length and taper?
Re: AX Chassis- Lets see them!
I think they are just about ready so will advise later this week when I am back in UK
I think they are just about ready so will advise later this week when I am back in UK
Re: AX Chassis- Lets see them!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JLF</div><div class="ubbcode-body">Can you please tell me the specs on the barrel? Length and taper? </div></div>
Lilja 16 twist tightbore 4 grove.
Remington Varmint contour.
23 inches.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JLF</div><div class="ubbcode-body">Can you please tell me the specs on the barrel? Length and taper? </div></div>
Lilja 16 twist tightbore 4 grove.
Remington Varmint contour.
23 inches.
Re: AX Chassis- Lets see them!
Now this is what this thread is about!!!
Who painted your rifle? I love it!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 96C</div><div class="ubbcode-body">
</div></div>
Now this is what this thread is about!!!
Who painted your rifle? I love it!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 96C</div><div class="ubbcode-body">
</div></div>
Re: AX Chassis- Lets see them!
Here's mine, not the greatest picture, but one of the best stocks I've ever used. The stock is very user friendly and works great off of barricades. I got mine through Mile High Shooting, they also milled the trigger area for my jewel trigger and where the bolt rests.
Here's mine, not the greatest picture, but one of the best stocks I've ever used. The stock is very user friendly and works great off of barricades. I got mine through Mile High Shooting, they also milled the trigger area for my jewel trigger and where the bolt rests.
Re: AX Chassis- Lets see them!
Here's mine at a local match a few weeks ago.
And a little yote hunting.
Here's mine at a local match a few weeks ago.
And a little yote hunting.
Re: AX Chassis- Lets see them!
96C,
Great paint, Great photos, Great looking rig all together. I enjoyed looking at it.
MS.
96C,
Great paint, Great photos, Great looking rig all together. I enjoyed looking at it.
MS.
Re: AX Chassis- Lets see them!
What scope base is that, and what size objective is your NF Scope?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SubXerO</div><div class="ubbcode-body">here r some pics
I messed around with some cheap rails the other night and did this for fun, not to shabby
</div></div>
What scope base is that, and what size objective is your NF Scope?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SubXerO</div><div class="ubbcode-body">here r some pics
I messed around with some cheap rails the other night and did this for fun, not to shabby
Re: AX Chassis- Lets see them!
^
56mm Obj
BO 20 MOA base, zero cant Spuhr mount (which run on the high side of med height rings)
as you can see i have only about 1mm-2mm of scope clearance, too little to fit my obj cap on
something for people to consider when getting rings and a scope for this chassis
i got lucky with my height that the scope even fit at all.
^
56mm Obj
BO 20 MOA base, zero cant Spuhr mount (which run on the high side of med height rings)
as you can see i have only about 1mm-2mm of scope clearance, too little to fit my obj cap on
something for people to consider when getting rings and a scope for this chassis
i got lucky with my height that the scope even fit at all.
Re: AX Chassis- Lets see them!
Nice! I have have the 56mm Obj also. I had a set of NF med rings (1.265), and the Obj cover wouldnt fit. I also saw that from shooting the rifle, there were small marks under the bell of the scope from hitting the shroud on the AX chassis. So I went with the 1.375 rings. A little high, but it works.... I guess lol
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SubXerO</div><div class="ubbcode-body">^
56mm Obj
BO 20 MOA base, zero cant Spuhr mount (which run on the high side of med height rings)
as you can see i have only about 1mm-2mm of scope clearance, too little to fit my obj cap on
something for people to consider when getting rings and a scope for this chassis
i got lucky with my height that the scope even fit at all. </div></div>
Nice! I have have the 56mm Obj also. I had a set of NF med rings (1.265), and the Obj cover wouldnt fit. I also saw that from shooting the rifle, there were small marks under the bell of the scope from hitting the shroud on the AX chassis. So I went with the 1.375 rings. A little high, but it works.... I guess lol
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SubXerO</div><div class="ubbcode-body">^
56mm Obj
BO 20 MOA base, zero cant Spuhr mount (which run on the high side of med height rings)
as you can see i have only about 1mm-2mm of scope clearance, too little to fit my obj cap on
something for people to consider when getting rings and a scope for this chassis
i got lucky with my height that the scope even fit at all. </div></div>
Re: AX Chassis- Lets see them!
I just received mine from Mike at Black Ops Precision yesterday. It's an Infidel in the green AX chassis. Need to throw on an optic and post up. Looks and feels great, can't wait to get behind it.
I just received mine from Mike at Black Ops Precision yesterday. It's an Infidel in the green AX chassis. Need to throw on an optic and post up. Looks and feels great, can't wait to get behind it.
Re: AX Chassis- Lets see them!
Remington model 700P .308, Rifle Basix L-1 K trigger set to 2.5 Lbs, Badger Ordnance Ultra High rings 1.400", Nightforce 40 MOA base and Nightforce NXS 3.5-15X50mm with the NP-R2 reticle.
Remington model 700P .308, Rifle Basix L-1 K trigger set to 2.5 Lbs, Badger Ordnance Ultra High rings 1.400", Nightforce 40 MOA base and Nightforce NXS 3.5-15X50mm with the NP-R2 reticle.
Re: AX Chassis- Lets see them!
Here is mine:
AADLAND Mount (1.45")--NXS 56mm objective
Remington 700 SPS Tactical
Badger 20 MOA base, bolt knob
The stock fits amazing! I'm thinking about selling one of my organs to fund an AX 308. When you think about it, a McMillan A5 adjustable stock will run you anywhere from $700-900 shipped, plus a DBM from Surgeon or Badger will add on another $300-350. Moreover, the wait on Manners and McMillan stocks...forget about it!! In the end, the stock's quality, looks, availability, and price fit me.
Here is mine:
AADLAND Mount (1.45")--NXS 56mm objective
Remington 700 SPS Tactical
Badger 20 MOA base, bolt knob
The stock fits amazing! I'm thinking about selling one of my organs to fund an AX 308. When you think about it, a McMillan A5 adjustable stock will run you anywhere from $700-900 shipped, plus a DBM from Surgeon or Badger will add on another $300-350. Moreover, the wait on Manners and McMillan stocks...forget about it!! In the end, the stock's quality, looks, availability, and price fit me.
Re: AX Chassis- Lets see them!
Alright here is an idea,
I plan to use an AX chassis in the future, replacing the H&S stock I have. I'm looking at optic mounts, and the centerline height is 1.210 inches, the American Defense AD Recon SL mount. The objective diameter of the Scope I plan to use is 2.33", which would have a radius of 1.165". Depending on the scope rail, which would be at the same, or a bit higher, height of the forend, would this scope clear? According to my math, it will. The scope in question is a Vortex Razor.
Alright here is an idea,
I plan to use an AX chassis in the future, replacing the H&S stock I have. I'm looking at optic mounts, and the centerline height is 1.210 inches, the American Defense AD Recon SL mount. The objective diameter of the Scope I plan to use is 2.33", which would have a radius of 1.165". Depending on the scope rail, which would be at the same, or a bit higher, height of the forend, would this scope clear? According to my math, it will. The scope in question is a Vortex Razor.
Re: AX Chassis- Lets see them!
Holy crap, thats a fantastic setup. The paint is amazing, and I have the same pelican case, but I want to go hide now after seeing yours. I guess I should order more foam and start over. Thanks for posting this, again, it looks great!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 96C</div><div class="ubbcode-body">
</div></div>
Holy crap, thats a fantastic setup. The paint is amazing, and I have the same pelican case, but I want to go hide now after seeing yours. I guess I should order more foam and start over. Thanks for posting this, again, it looks great!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 96C</div><div class="ubbcode-body">
</div></div>
Re: AX Chassis- Lets see them!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pupdawg</div><div class="ubbcode-body">It might not clear. With that combo you have .045" of difference. Thats roughly less than a 16th of an inch. I would look to get a little higher rings just to be safe. </div></div>
If the scope base itself was higher than the forend of the Chassis itself, which it would be, it should fit, but it will be close.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pupdawg</div><div class="ubbcode-body">It might not clear. With that combo you have .045" of difference. Thats roughly less than a 16th of an inch. I would look to get a little higher rings just to be safe. </div></div>
If the scope base itself was higher than the forend of the Chassis itself, which it would be, it should fit, but it will be close.
Re: AX Chassis- Lets see them!
All of mine are "bone stock"
Here is a all black 260 on an AX
How about a 308 all green?
No Joy? Here's an FDE 243AI
All of mine are "bone stock"
Here is a all black 260 on an AX
How about a 308 all green?
No Joy? Here's an FDE 243AI
Re: AX Chassis- Lets see them!
My R700 in .308. The Harris has been replaced with an Atlas and the SDN-6 will be replaced with my new TB 30P-1 as soon as the stamp shows up. I'm also thinking of rechambering it to .260 but it will stay 308 for now.
My R700 in .308. The Harris has been replaced with an Atlas and the SDN-6 will be replaced with my new TB 30P-1 as soon as the stamp shows up. I'm also thinking of rechambering it to .260 but it will stay 308 for now.
Re: AX Chassis- Lets see them!
Tom,
I've got a fever! And the only prescription is more pics of that all ran AX chassis! That thing is out of this world! Also, how much of a hassle is it going to be to put an AE MKIII in one of these? Prohibitively so? Minor ass pain? Or somewhere in between? And if that won't work, they work fine with surgeon actions, right? It should be close enough to the Remington footprint, I would think...
Tom,
I've got a fever! And the only prescription is more pics of that all ran AX chassis! That thing is out of this world! Also, how much of a hassle is it going to be to put an AE MKIII in one of these? Prohibitively so? Minor ass pain? Or somewhere in between? And if that won't work, they work fine with surgeon actions, right? It should be close enough to the Remington footprint, I would think...
Re: AX Chassis- Lets see them!
All of mine have Surgeon actions. They work fine....that's why I have 3 of them
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: aggie410</div><div class="ubbcode-body">Tom,
And if that won't work, they work fine with surgeon actions, right? It should be close enough to the Remington footprint, I would think... </div></div>
All of mine have Surgeon actions. They work fine....that's why I have 3 of them
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: aggie410</div><div class="ubbcode-body">Tom,
And if that won't work, they work fine with surgeon actions, right? It should be close enough to the Remington footprint, I would think... </div></div>
Similar threads
