Harris bipod hight
- Thread starter Muffo
- Start date
http://precisionrifleblog.com/2015/01/05/bipod/
Half way down the page there is discussion of a "custom 7-12 inch Harris bipod". It looks like the guy cut an inch off the upper legs of a 9-13" Harris and used the springs from a 6-9".
Half way down the page there is discussion of a "custom 7-12 inch Harris bipod". It looks like the guy cut an inch off the upper legs of a 9-13" Harris and used the springs from a 6-9".
I run a bipod extension kit from Doug at Rock Lake Rifle Range. Rock Lake is a national PRS venue and Doug's a great guy. You keep the standard feet of the Harris but it adds a screw fitting that increases height by 1" or so. Then you can swap out for spiked feet or additional leg extensions if you need more height. Most of the time the extra 1" comes in handy and does the job.
https://rlrr.configio.com/
You can purchase at the link above.
https://rlrr.configio.com/
You can purchase at the link above.
This is the best thing you can do. YOu can use all atlas and the Amazon and ebay pieces, The bipid also flexes a little bit when its loaded so you take the skittering out that happens when you load the harris too much.
I would get the 6-9 and the pod mods.
I did this and it wasnt as worth it like i thought. The pod mod will get you close with less Butt pain. But its a decent idea.
I wonder which is an easier solution between this and the Rock Lake one. Easier isn’t always better, I suppose.
Cheers guys. Id love to do the 7 to 12 but thats mot really an option. Im in Australia and a harris sets me back about 230 bucks. Im not about to buy 2 to get one when this is going to be my back up bipod for stages where my atlas 5h is not a viable option. 1 of the 2 other options looks perfect
The podmod add at least 30cm so if you do the 6-9 you will get a little higher. I never use the highest one mine and I have the 7-12 mod actually 7-13 1/4 and the 6-9 with the pods
Similar threads
Accessories
Harris S1A2 lightweight bipod
