Parts are here. Time to start putting it together.
New Custom AI AX308 Build
- Thread starter 7WSMShooter
- Start date
“Custom”? An off the shelf factory rifle, scope, mount and a bipod?
Nope Custom Bartlein barrels from Moon at Crescent Customs with contour and brakes made for my 1 off custom Titanium suppressor in 260 and 308.
Go shit in somebody’s else’s thread
Go shit in somebody’s else’s thread
Ain’t no less custom than a “custom” action in a “custom” stock.
Custom rifles (as far as what we call custom) aren’t exactly custom at all.
Custom rifles (as far as what we call custom) aren’t exactly custom at all.
Can is 13 7/8 long 1.5 diam. Extends past barrel and brake 5 3/4 inches. 16 oz in Titanium.
260 barrel is Bartlein, 7.5 twist, Marksman
Contour, 26 in before the profile throated
For 147 ELDMs long.
308 is Bartlein, 10 twist AI 2018 profile, 24 in
Recontoured for can.
260 barrel is Bartlein, 7.5 twist, Marksman
Contour, 26 in before the profile throated
For 147 ELDMs long.
308 is Bartlein, 10 twist AI 2018 profile, 24 in
Recontoured for can.
Last edited:
What an awesome setup!
Can you get a full side pic with suppressor on whenever you get a chance?
I bet it sounds unique suppressed with that style and it being a custom can.
I would not be able to resist doing an additional 16 in .308 barrel with that can.
Can you get a full side pic with suppressor on whenever you get a chance?
I bet it sounds unique suppressed with that style and it being a custom can.
I would not be able to resist doing an additional 16 in .308 barrel with that can.
Sage green, yep. It’s freakin quiet. Got a video of my 7WSM with the prototype of that can that’s an inch shorter and you can hear it. Just don’t know how to post the video. Think the shortest I can run with this hand guard is about 22.5-23 inch barrel. I could do a 16-18 barrel if I got the short hand guard.
I have a 7 in reaper with a new baffle that’s quieter than my 9 in cans. This is a whole different level. And if you drop your 20 pound system on your suppressor,
No worries. You could beat your way through a door with it and then shoot it without worrying about sending half your baffle stack downrange.
No worries. You could beat your way through a door with it and then shoot it without worrying about sending half your baffle stack downrange.
Same type setup on 7WSM with the first gen of this can that’s an inch shorter.
Just lovin this setup SO MUCH
You seem to be on top of things so I assume the AI hand guard is not big enough to clear a 1.5 inch inside?
I know when I built one of my ARs it was challenging to find a front handguard that had an inside diameter of 1.75 in to clear a shorty barrel and suppressor inside.
All I can say is what a might fine rifle sir?
You seem to be on top of things so I assume the AI hand guard is not big enough to clear a 1.5 inch inside?
I know when I built one of my ARs it was challenging to find a front handguard that had an inside diameter of 1.75 in to clear a shorty barrel and suppressor inside.
All I can say is what a might fine rifle sir?
Thanks. Yep, the AI hand guard doesn’t have quite enough inside diameter to run this can enclosed. Was thinking about trying the new one from Victor when it becomes available
FN SPR 7WSM
Broughton 1/9 twist 26 in
162 ELDM, Winny Brass, RL23
3100 FPS
Broughton 1/9 twist 26 in
162 ELDM, Winny Brass, RL23
3100 FPS
Last edited:
Similar threads
