I recently added a 7mm Rem mag to the mix and will start doing ladder test soon. Should be a very versatile cartridge.
Best overall caliber for long range shooting
- Thread starter Schw15
- Start date
It's great to have a few more tools in the toolbox. I now have 7 that range from 17hmr and 375 cheytac imp.
If you are already single loading rounds what about a 300 rum or the 338 edge and keep your same bolt face.
And just keep the shorter range gun while adding distance to the larger gun
And just keep the shorter range gun while adding distance to the larger gun
There's trade offs with everything...especially with barrel life vs. performance. IMO for what you're doing the 300 win is already a pretty solid round. Maybe the 230 A-tip would extend your range a bit farther?
I just picked up a .338 Edge. Seems like a good round. The Norma brass is only good for about 5 reloads with how hot they are loaded. It shoots a 300gr Berger at 2,880fps. I haven’t really shot it past 1,000 yet to see how well it will perform, but Applied Ballistics says it should stay supersonic to about 2500 yards or so.
Way too heavy to hunt with though. I believe the whole setup is around 25lbs.
I shoot 6.5 CM and 338 primarily, so I would have to also say one caliber for everything is not really the ideal way to go.
Way too heavy to hunt with though. I believe the whole setup is around 25lbs.
I shoot 6.5 CM and 338 primarily, so I would have to also say one caliber for everything is not really the ideal way to go.
I have a 30 Nosler, and no longer shoot my 338LM or 300WM rifles. Cartridge is a better design, more efficient cartridge than the 300 PRC. Plus there are 3 or 4 companies providing quality brass. I'm launching the Berger 230-gr Target Hybrids at 2930-fps. Not saying the 300 PRC is any slouch, just believe the 30 Nosler is better.
If you're already running a 300WM, I would stick with that. Great cartridge, but in my opinion, the cartridge doesn't provide any benefit if you plan on shooting anything heavier than a 215-gr bullet.
As far as barrel life, a 300WM barrel will last longer than a 7 SAUM or 7 RM, as I have first hand experience. Won't be getting rid of my 300WM's anytime soon, and will be building another 7 SAUM as soon as I get an action ordered.
Lots of cartridges out there, and they all have pros and cons.
Cartridge OAL? Just under 3.70". That's with the bullet seated at the optimal bearing surface/boattail and neck/shoulder junction.
Just an FYI, the 30 Nosler is a shorter case compared to both the 300WM and 300 PRC.
Just an FYI, the 30 Nosler is a shorter case compared to both the 300WM and 300 PRC.
Awesome thank you. Mine i have to single shot it no mag to fit that length. I have a rem 700 long action greyboe ridgeback so just need to get different bottom metal to take cip mags
What barrel length?
My 28" .300NM finds pressure if I push the 230 Berger's much past 2950 fps. Though my barrel seems slower then most.
love mine
Recoil is mild and it hits steel at a mile better than my 260.
Will try 2000 yards probably in February.
R26
negative on the hunting but energy on a plate at any distance I’d hurt at is quite a bit more than 308. For not much more recoil.
1st barrel so no clue.
in a long action H1000/7977 would be awesome.
A bit crunchy in a short action.
If you have a stock of 6.5x55 lapua brass make it an AI version and next barrel make a 7 or 7.5 twist for the 150 smk, 147/153 eld's or 156 berger. Spec a reamer for one of those and you will cover out to a mile fine. It has the cheapest lapua brass out there. It will run 3000fps just like the 6.5-284.
Your 300 win with a good reamer like mentioned above will need cip or wyatts mbe 2. If you goto the Nosler/rum norma case mbe3. You may need some work on your feed ramp and bolt stop depending on your particular rifle.
Your 300 win with a good reamer like mentioned above will need cip or wyatts mbe 2. If you goto the Nosler/rum norma case mbe3. You may need some work on your feed ramp and bolt stop depending on your particular rifle.
My choice will be the 338 Lapua. I have the Ackley and use it for ELR and also for hunting.
You'd have to look at the opening to determine if you'd need the work to benefit from the bigger boxes. Take the action out of the stock and open your bolt. Measure how big the opening from the bottom and that will determine what if anything is needed
I just inspected my 6.5 PRC barrel and its showing more wear than i expected at 800 rounds. Im debating about pulling it this winter and going 7 SAUM or 300 WSM.
I’d be ecstatic with 1800,,,,, I’m thinking less though.
SS case looks awesome but your locked in on dies and brass and R26 makes the saum easy peasy and it runs in mags just fine.
I’m glad I came across this thread! I have been into 6.5Cm for over a year, now reloading. Rifle is a bone stock Tikka TAC A1 with a SWFA 10x44. I’m getting ready to buy a BH Origin LA. I was going to barrel it up with a 24” Bartlein in .300 PRC. I want to drop the barreled action into an Oryx chassis. As my max range would be no more than 1400yrds, is .300WM a better option? The rifle will be used for hunting Elk and brown bear, as well as ringing steel. I keep reading the Hornady brass sucks for reloading with .300 PRC. With Hornady the only ammo manufacturer I don’t want to be stuck with limited factory ammo choices for hunting. Please give me your opinions as I’m still new to 1,000yr shooting. Yeah I’m getting a NF 6-24 for the Tikka.
I’d still go 300 prc.
ADG brass is in the works and a lot of people are having good results with hornandy brass.
300 win mag for cheaper route but prolly needs 26inch barrel in my opinion. Run the 212 eldx great for hunting and high bc. The 300 prc is more of a puncher and i wouldnt over look 30 nosler heard alot of great things
Looking more towards a crossover rifle w hunting in mind, 300 WSM will always have a higher killing factor (TKO) in my experience.
Im not one to sit for days running numbers. losing sleep and driving myself NUTS lol.
I have 2-338 LM AI built and nothing can compare on a short action.
Getting off topic now! Alway been a fan of 7MM - 458 cal for hunting. Have killed plenty w sub 30 cal calibers over the years, just prefer a Barnes TTSX and 30 cal or bigger. I know i can break shoulders, stop a bear or use a Texas heart shot if need be.
You mentioned 7 saum. I love mine setup in a long action pushing 180 Eldm’s. Works well clear out 2000yds. Honestly probably get just as many hits with it as I do the 338 LM
