Masterpiece Arms 300PRCBA

[Devildog]

I’m wanting to pick up a rifle in 300 prc but I’m not interested in the expense or time to build another custom rifle right now, neither do I want a RPR, Savage or like quality rifle. In my digging around the net I came across a vendor who has a ready to go Masterpiece Arms BA model for less the 3k which is in my wheel house.

Im not finding a lot of reviews, what little I have seen looks promising. Im curious to hear from those of you that have knowledge or experience with MPA’s in house builds and what your thoughts are. Thanks!

 

[Sticks]

My 6.5 PRC is an off the rack MPA rifle. Met the 3/8 MOA guarantee, and my crappy skills managed a 5 shot group (yes, 5 shots) at 730 that was .6 MOA with my reloads, and most of that was left/right. My elev was closer to .3.

 

[Devildog]

My 6.5 PRC is an off the rack MPA rifle. Met the 3/8 MOA guarantee, and my crappy skills managed a 5 shot group (yes, 5 shots) at 730 that was .6 MOA with my reloads, and most of that was left/right. My elev was closer to .3.

Nice that’s the kind of things I was hoping to hear! Thanx

 

[ruebarb]

I have the MPA BA in 6.5 Creed, shot most reloads sub 1/2 MOA in 5 shot groups, it actually made load development difficult. If I do my part, I can get a couple of 5 shot 1/4 moa groups at 200 in a trip. When I got the rifle, I called them, they told me which power and what bullet would give the best results, most MFG tell you can't use handloads.

 

[Sticks]

Yeah...had the same problem. Not a good enough shot to to that ladder test with one shot per charge weight, so I did 3 at three targets. Ended up with one target with a .75" ragged hole and a couple strays, a second target with a 2" vertical group (3" L/R), and the third was mildly usable...all at 300 yards.

Seriously, what the hell am I supposed to do with this? That is 14 shots - 14 charge weights at .4 gr increments