Sidearms & Scatterguns What's your daily CC gun?
- Thread starter nockhunter
- Start date
Thinking most things are probably comfortable when you can still fit in size 32 jeans......
I wear 32x32 too, and I can only stand IWB at 330-400 o'clock. Appendix is out of the question and double stacks suuuuck.Thinking most things are probably comfortable when you can still fit in size 32 jeans......
I borrowed a friends AIWB setup while we've been quarantined. I'm one of few people that physically report to the office so figured i'd give AIWB a try while traffic was light around here. No matter what position the gun was in (highest of high to lowest of low, removed sidecar, etc) it stuck out like a sore thumb. I found the day-to-day to be very comfortable while carrying AIWB but I would have to wear a maternity blouse to go unnoticed. I would really like to try one of the slimline 10+round 9mms (P365, G48) with AIWB and see that that goes. For now though, the G19 in a Crossbreed is my main EDC.
STI DVC-C mostly winter months
CZ Protek-1 the rest of the time
Both in either a IWB or OWB Garrett depending on how hidden I care about.
CZ Protek-1 the rest of the time
Both in either a IWB or OWB Garrett depending on how hidden I care about.
It was milled for an adapter plate so that you're not stuck with one single brand of optic. Similar to what comes from the factory in the CZ P-10 optics ready or any Glock MOS pistol
It helps a lot to have a longer gun that can push against the pelvis to lever the grip against the abdomen, and to have a good belt and a claw on the holster to lever the bottom of the grip into the abdomen. I despised carrying until I found a real good solution, now I carry everywhere. ANR kydex holster with claw is what I use, but there are several similar designs out there. Very comfortable, easy to adjust and hide, I can see where the gun is, always accessible. The claw and a rigid belt make a big difference.
I agree with UpSideDown. I could never get comfortable with IWB until I added a claw to my set up and a good steel core carry belt. Completely changed the comfort and orientation to something that I barely notice any more.
Who did the milling and where can I buy that kind of holster? Where did you buy the optic plate? I have a CZ compact that I would like a red dot for CCW, Thank you in advance for the info?
Cajun Gun Works for all CZ.
ETA: Was quoted $340 for the following for my Shadow 2:
Cut slide for direct mount RMR T2
Install rear blacked out buis
Install front red fiber optic buis (including CGW supplying the sight)
return shipping
Should get an email in about 2/3 weeks to ship it off for a 4 week wait. Pretty excited.
ETA: Was quoted $340 for the following for my Shadow 2:
Cut slide for direct mount RMR T2
Install rear blacked out buis
Install front red fiber optic buis (including CGW supplying the sight)
return shipping
Should get an email in about 2/3 weeks to ship it off for a 4 week wait. Pretty excited.
Last edited:
There are far cheaper options than CGW or CZ Custom that do work as good or better when it comes to slide milling for optics.
Here are but a few:
https://www.dpcustomworksllc.com/product-page/cz-p07-p09-optic-cut (he did my P-09)
CZ P07/09 Trijicon RMR
Jagerwerks enhances the performance, function and overall look of handguns through innovative design. Specializing in slide work and machining for Glock, Sig, Archon, HK, FN, M&P and CZ Handguns.
jagerwerks.com
PMM CZ P01/CZ75 SHEILD/RMR Optic's Slide Cut Service
Product Details: PLEASE READThis is a service that requires sending in your slide. The slide must be a factory slide and cannot be a blank or “builder” slide.CURRENT LEAD TIMES:Machining: MINIMUM 6 WEEKSRefinishing:Black DLC and TiN: 1-6 WeeksGrey and FDE PVD: 1-6 WeeksCerakote: 1 Week (If...
www.parkermountainmachine.com
@308pirate
Yeah, most of those companies will not cut + cut for buis on an S2, only a P07/09/10. Example; Primary Machine had a great price, but would not do a cut to the irons to allow for correct height sights.
Yeah, most of those companies will not cut + cut for buis on an S2, only a P07/09/10. Example; Primary Machine had a great price, but would not do a cut to the irons to allow for correct height sights.
I'm awaiting a Holosun 407k from Kenzie's on a Glock 48 build that will eventually be my main carry piece. Replacing my 19 for in town daily carry.
This 19 will eventually be sent to Agency Arms for their AOS plate system. The MOS Glock plates meh.
This 19 will eventually be sent to Agency Arms for their AOS plate system. The MOS Glock plates meh.
You're 100% correct about this. Rather than sending my Glock to anyone, I opted for the C+H Precision MOS Plate. Its a lot more attractive than the factory plates and there are no mods made to the gun. You can see what it looks like on my G19 MOS FS a few posts up.
One of the reasons I wanted to use their AOS was to be able to try irons forward of the optic. If I hate it, I can get another plate and move the rear sight to the rear. . That C+H does look nice though.
Sorry for the delayed response. I had a local machinist mill the slide, however, I would go with CGW if I were you. The holster is from Tier 1 Concealed.
A Springfield Hellcat came home with me yesterday. A total impulse buy. It may become my summer clothes carry gun after some reliability testing. I love the sights.
I’m selling my pimped out, full Cajun package SP-01T if you’re interested... to buy a CZ Tactical Sport Orange 
I tried for years to carry my Gen 3 Glock 19. Tried every carry position but it always upset my sciatica.
So I now carry a M&P shield 1.0 with an apex trigger and a spare magazine. So much easier on my body and I train with it to be proficient. Not as easy to shoot as the G19 but better for my body.
So I now carry a M&P shield 1.0 with an apex trigger and a spare magazine. So much easier on my body and I train with it to be proficient. Not as easy to shoot as the G19 but better for my body.
I have so many...but I just got this one back from my guy today (642 smith)...cerakoted...paint was rubbing off...he just mixed up a few colors he had on hand...it’s my no nonsense summer carry..
Attachments
Last edited:
I think they were call G10 grips.
They are holding up better than the old paint on the frame.
Last edited:
Learn to shoot DA/SA
MUCH faster to the first shot than fucking around with the horrible SA safety and just as accurate if you put in a little bit of work.
But then I'm a long-time revolver shooter and have never even held a 1911 since Navy pistol quals during USNA plebe summer 36 years ago.
As far as holsters go, there are tons of good choices. I have had good personal experience with Winthrop for OWB and IWB leather, KT Mech for OWB kydex, and High Noon for IWB kydex
Concealed Carry Holsters | Leather Gun Belt | Concealed Carry Purse
Winthrop Holsters has the best online collection of concealed carry holsters, leather gun belts, concealed carry purses, and magazine holsters.
www.winthropholsters.com
Handmade Gun Holsters, Magazine Carriers, Belts, and More!
Gun holsters are our passion, whether it's a basic leather holster or a heavy-duty Kydex holster. We also offer magazine carriers and holster accessories.
www.highnoonholsters.com
Same here
and ditto on the plethora of good information and people on the Hide.
Similar threads
