Sidearms & Scatterguns Tops knives enthusiasts thread
- Thread starter Remington_Steel
- Start date
Got a TB tracker on my "going into the timber" bag I use for camping hiking and trapping.
I’m in love with trackers and have a few of them. I always have one on me when I’m out in the wilderness or on a hike. Which do you carry?
Last edited:
I have a B.E.S.T as an emergency do anything knife in my pack. Its a brute.
They do but they do not accept monopoly money as payment so they are put of my reach. Lol
Would love to have a couple in my collection some day.
Ultimately the knives I’ve beat on the most are tops knives. But half face blades are the most awesome. I’ve got a number of benchmade knives, those adamas are nice!
I have every model of tracker. Three tracker 3’s including the anniversary s35vn unit.
Tops knives are awesome as fuck. I’ve got some where around 40 of them.
I have every model of tracker. Three tracker 3’s including the anniversary s35vn unit.
Tops knives are awesome as fuck. I’ve got some where around 40 of them.
Tops makes some decent knives ... I’ve sold a lot of my collection but the ones I’ve kept are the mohawk hunter , max the mini axe and cut 4.0 ... gonna be selling 4.0 soon it’s brand new... If you love trackers check out wenger blades trackers ... I just picked up a micro tracker in nitro v...
Those wengers are beautiful. I’d have to call them for a custom if anything. Half face blades are my go to source for any custom blade. Check that Half Face thread, you’ll see some wild pieces.
Love the cut 4.0, that’s my oldest daughters preferred knife to carry.
Love the cut 4.0, that’s my oldest daughters preferred knife to carry.
Attachments
Last edited:
Yup that’s the one black handle and everything .... my usual work edc is a blur or pm2 in pocket for boxes and compliance edge claw fixed blade...
love HFB just can’t afford that much of em... I’ve got a crow jr but I really want a hunter skinner ..... I kinda have 1-2 from most makers
I have a Tom Brown #4 and ordered a Baja 3.0 and Brakimo some time back. If I ever receive the two I just recently ordered, they may be my last Tops Knives due to my recent poor experiences with Tops CS. The knives took longer than the quoted lead times provided multiple times and they shipped them to someone else and have done next to nothing to fix the problem.
Sexy HOG!
Bandit - Dude forgive tops! It’s Covid days. Customer service has been set back 100 years.
Bandit - Dude forgive tops! It’s Covid days. Customer service has been set back 100 years.
Covid or not, there’s no excuse to be okay with poor customer service and tarnishing that relationship. I’m not going to sympathize with a company that couldn’t meet the terms they set forth on multiple occasions, then be okay with them sending my late products that I paid for, to someone else and not even be offered a solution to rectify the problem they created.
Sounds like a real pain. I’ve never had anything but an awesome experience ordering 10 knives direct. Mostly I’ve ordered from vendors and never one issue. The knives are reliable as hell and priced well. I’ve turned lots of people onto them. The customer service issue happens. I have to make people wait extra long several times a month.
Great product at great prices are not the norm.
I enjoy a nice knife, I may own a few
. But my favorite is the one my uncle made me. A heavier version of a Lakota fish hawk. And yes, that is a 10mm headstamp .
. But my favorite is the one my uncle made me. A heavier version of a Lakota fish hawk. And yes, that is a 10mm headstamp .Slab, that is indeed a sexy piece! But why so many dudes trying to thread hijack the tops knives thread? I’d is there a conspiracy against Tops knives?
The public wants to know?
The public wants to know?
Last edited:
Sorry, I have never owned a TOPs so no pics. I do have questions about some of their product that might fit a need I have. I need to clear some trails through saplings tat are an inch plus thick and a variety of blacberry that has heavy stems and has dense dead under growth that has stems to the size of your thumb and is very springy. The product has to maintain an edge, have some reach, not be prone to chipping, have a grip that does not create hot spots with extended use and have a weight/balance that is appropriate to its task.
I'm looking at the two machetes, the El Chete and the Kuma Kage. If some one has extended experience with any of these I would like your impressions.
I'm looking at the two machetes, the El Chete and the Kuma Kage. If some one has extended experience with any of these I would like your impressions.
The el Chete is awesome. It’s a chopper for sure. Not a fast machete for moving through heavy brush. I cut down a tree w it after I got it, around 3ft diameter. Took an hour. There is a picture above.
Long time lurker,first time poster here.
I have 3 knives that are on permanent rotation,Benchmade 940 Osbourne.Fine edge,aluminum scales were replaced with yellow G10 that scales that I milled and hand finished. The other two are vintage Case folders,a Russlok and a sodbuster jr.Both are high carbon blades,the russlok had jigged blue bone scales that got cracked over the years,textured yellow g10 scales were machined for it as well,the sodbuster had black delrin scales sometime in its life,when I found it at yard sale in a cigar box full of fountain pens,knives,straight razors and assorted other bricks rack it had a sliver of black nylon/delrin scale left and eventually I milled a set of scales for it out of resin/glass/fiber too.
I have 3 knives that are on permanent rotation,Benchmade 940 Osbourne.Fine edge,aluminum scales were replaced with yellow G10 that scales that I milled and hand finished. The other two are vintage Case folders,a Russlok and a sodbuster jr.Both are high carbon blades,the russlok had jigged blue bone scales that got cracked over the years,textured yellow g10 scales were machined for it as well,the sodbuster had black delrin scales sometime in its life,when I found it at yard sale in a cigar box full of fountain pens,knives,straight razors and assorted other bricks rack it had a sliver of black nylon/delrin scale left and eventually I milled a set of scales for it out of resin/glass/fiber too.
Welcome Jm. I’ve been hoping to see how many tops lovers there are here w this thread. There is a general what knife is in your pocket thread. Repost there also.
www.snipershide.com
And since you posted in this thread. I’m going to have to ask you to check out tops offerings at minimum. I hope you will buy a reliable fixed blade for your kit.
I’m waiting for tops to reopen so they can send this which I have paid for
www.topsknives.com
K-Bars - What Knife is in your pocket right now?
Just like the title states. Here we go, I'll start. ZT 0452CF Sinkevich design, S35VN steel Carbon face plate, Titanium back, frame lock. My favorite EDC!!!
www.snipershide.com
And since you posted in this thread. I’m going to have to ask you to check out tops offerings at minimum. I hope you will buy a reliable fixed blade for your kit.
I’m waiting for tops to reopen so they can send this which I have paid for
Storm Vector Knife - TOPS Knives Tactical OPS USA
During the Viking Age you never would have left home without it.
www.topsknives.com
I use to work there making alot of those! Very nice collection so far man!
I worked there beginning of this year till about a month or 2 ago. I loved making the knives but could not stand the child molesters that work there.
Usually I ask for proof of those kinds of things. I’m sure that would be difficult. Plus who is verifying employment. How do you come to be aware of these things?
Easily can find information on my states sex offender registry and Map. I check it everytime we get new neighbors has pictures of each person along with crime, address, and status of compliance. The person who runs and owns the shop is in charge of hiring there is a child molester i come across his name in the registry and was shocked because he was my boss. That in turn led to me finding others on the list that worked there.
I can’t say I’ve been so committed to searching the registry. I don’t really talk to my neighbors and my coworkers could not work where I work and been guilty of any felony anything.
I guess I have to trust that Idaho has been dispensing justice properly.
I guess I have to trust that Idaho has been dispensing justice properly.
$200+ for 1095, chunky bevels, micarta, and thick blade coatings that hide rough grind lines? M’k, but there’s better bang for the buck. Tops has always struck me as the Tapout of the cutlery world. They’ve got a few decent designs, but the rest make it hard for me to take them seriously. The tracker is cool, but not at their asking price, and doubly so with the amount of reprofiling required to make it into a functional knife.
I agree w this dude.
Sidearms & Scatterguns - Bushcraft Knives
Or whatever you call them. I was looking for a machete and saw this. Had to have it. What do you have? This is a Lon Humphrey Retribution with dark Curly Maple and orange liners. 10" 52100 steel blade, 16 1/2" overall. It's a beast!
www.snipershide.com
What you call chunky I call durable. Sharpen your own knife. You can be happy with your edge.
The tops nothers are not saws. They work so well. So useful.
Last edited:
The tracker, as built by tops needs... work...
www.bladeforums.com
This knife Really Scares Me !!!
For the first time in my life I have in my posession a knife that really scares me ! This is the Tops Tracker that fellow forumite Horn dog has so generously donated to me as he hated it and I have to say I totally love it !!!!! As soon as I opened the package a smile spread across my face...
www.bladeforums.com
Similar threads
