I participated in a local match and it was windy. I was getting ready to shoot the first stage and noticed my rifle was caked in dirt. It was so bad I had troubles chambering a round. I will now be buying a rifle cover to protect between stages, but how do you lube your bolt? I normally have a light coat of oil that I wipe clean and put a little grease on the lugs.
Bolt lube, dirt and PRS
- Thread starter bigred6695
- Start date
Not a PRS shooter but I run Lucas synthentic grease on the lugs and the cocking ramp (Savage). The bold body is TiN coated so it gets nada...
For my match rifle, I run synthetic grease on the lugs, cocking ramp, and the raceway. I also put a very thin film of grease on the bolt body. This is on a Gen 1 Nucleus. Haven't had grit stop her yet.
During the moon dust season (July-Sept), I put a small amount of grease on lugs and ramp. Everything else is bone dry.
Take a look at Hornady One Shot cleaner and lube. Give the bolt a good cleaning, light geese on lug and cocking, then spray a lite/single pass. Let it dry then you’ll be GTG.
Next to the Hornady One Shot is this.
www.brownells.com
Haven't tried it, but would like to eventually, just haven't had a need.
MILITEC, INC. MILITEC-1 OIL | Brownells
Synthetic-based metal conditioner provides constant, self-lubricating protection for your metal parts to ensure reliable functioning in extreme conditions. Actually becomes part of the metal; the heat from normal firing of your gun molecularly bon...
www.brownells.com
Next to the Hornady One Shot is this.
Haven't tried it, but would like to eventually, just haven't had a need.MILITEC, INC. MILITEC-1 OIL | Brownells
Synthetic-based metal conditioner provides constant, self-lubricating protection for your metal parts to ensure reliable functioning in extreme conditions. Actually becomes part of the metal; the heat from normal firing of your gun molecularly bon...
I've got one tube of that oil and grease that I was given as a sample years ago. Their size makes for convenient range bag lube.
It works, and it's decent stuff. But, you can buy a quart of synthetic motor oil, and a whole pound of synthetic bearing grease for the same price.
I’ve been running HAWG grease from rand the last few years and I’ve had good results. I just do the lugs and cocking ramp with a super thin layer and send it.
www.brownells.com
RAND BRANDS HAWG GREASE | Brownells
Rand HAWG Grease is has the best performance of any grease on the firearm market. With a dropping point of 540-F so, it will not begin to melt until that temperature is reached in your firearm. Your firearm will operate better and longer. The flas...
www.brownells.com
I shoot in the desert all the time moon dust, sand, if it rains mud. Bolt is bone dry with as little grease as I can manage to put on the back of the lugs. 10000 rounds like this and it runs like butter. I am running an impact, And different actions like a different lube levels. But overall, in the dirt, I think drier is better.
This is what I do as well. It's not very dusty where I shoot, but I will tell you that I had a bad batch of brass a couple years ago (the primer pockets were loose) and it would routinely blow primers. The action would get caked with all the junk coming the wrong way....This is what made me try the One Shot.
I now use red grease on the lugs and One Shot on the bolt body on all my actions. I recoat every time I clean (every 200 - 300rds). When I used to oil the bolt body you could tell it would collect dirt - even in my not very dusty environment - and it would slow the bolt down or make it a little sticky. But with the One Shot it dries and it's still slick. Nothing sticks to it. There was a notable difference in my Bighorns and my ARC Archimedes.
Or get an Impact action that's designed to run in some really harsh conditions. Saw a number of Defiance actions go down during TPRC last November, and Impacts didn't miss a beat.
Yeah, basically just get a better designed action. Even something like a rifle cover doesn't prevent moon dust buildup in 20 mph winds.
@bigred6695
www.midwayusa.com
The gun cleaner/lube is what I've used.
Hornady One Shot Gun Cleaner Dyna Glide Plus 5-1/2oz Aerosol
Hornady One Shot Gun Cleaner-Dergreaser and Dry Lubricant reduces friction, cleans grit, grime and old oil from firearms and reloading equipment. It...
www.midwayusa.com
The gun cleaner/lube is what I've used.
My KAC SR15 E3 MOD2 only uses Mobile 1 Synthetic and I run it dirty. Been using the same on my bolt. So far so good in NJ jungles 
Similar threads
