• Win an RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below! Subscribers get more entries, check out the plans below for a better chance of winning!

    Join the contest Subscribe

Accuracy International Picture Thread

#8,051
NoLegs24 said:
Sold on it? lol. Nice NF 7-35x with BEAST turrets.
Click to expand...
I’d really like to spend some time behind one, but realistically that isn’t going to happen. I bought my AT and AX without ever being behind either and have been impressed/satisfied so far.

I am going to purchase an AT-X. The debate I am having is do I get in on the preorder or wait until they are available and in stock.

I am a middle of the pack shooter, but occasionally have a lights out day and shoot well. The AT-X isnt going to make or break my performance, but I still want one lol.
 
Last edited:
  • Like
Reactions: Tex68w
#8,053
blbennett1288 said:
I’d really like to spend some time behind one, but realistically that isn’t going to happen. I bought my AT and AX without ever being behind either and have been impressed/satisfied so far.

I am going to purchase an AT-X. The debate I am having is do I get in on the preorder or wait until the are available and in stock.

I am a middle of the pack shooter, but occasionally having a lights out day and shoot well. The AT-X isnt going to make or break my performance, but I still want one lol.
Click to expand...
I'm going to venture into no man's land and comment FWIW as a non-competitor, but I've owned 2 ATs and have an AX. I had the chance to briefly shoot the AX in 6 Dasher at Quantico Saturday, it was incredibly smooth (as is any AI action), but it felt lighter to me when cycling. The 6 Dasher had very little recoil and I was easily able to stay on target and watch the trace, hits and misses at 756y. Ergo was fantastic, even though I was shooting the bosses setup and glass. I only shot a mag, but it's motivating me to get off my old ass and become a PRS competitor. :)

My understanding is the pre-order AXs will be in 6.5CM, so if you want to shoot, for example, a 6mm, you'll be putting more cash up for a barrel and mags inserts. The team were using delrin inserts and different springs and followers for the 6mm rounds in a regular AI mag. They did say they will release different caliber mags (akin to the AX mag recently released for the 308 bolt face), but for now, you may be limited to 6.5CM.

Pics of the AX I shot. Gratuitous video of the match winner also included.

 

Attachments

  • thumbnail_IMG_6748.jpg
    thumbnail_IMG_6748.jpg
    691.6 KB · Views: 108
  • thumbnail_IMG_6752.jpg
    thumbnail_IMG_6752.jpg
    591.5 KB · Views: 115
Last edited:
  • Like
Reactions: CDM1972, 96C, 5-0 MTB and 3 others
#8,057
All dressed up with no place to go...

My GTAC AXMC conversion finally arrived. A little weather on the east coast and it was stuck in New York for a week. It took all of 15 minutes to install and wouldn't you know it, despite having 87 gazillion parts, no decent AR grips. Oh well, maybe Amazon can deliver quickly or I'll "suffer" this weekend with a crappy hard plastic grip. :)

ETA - First pic is how it arrives and was poor lighting, the unit is Dark Earth. Second shows it installed on a Dark Earth AX.
 

Attachments

  • AXMC.jpg
    AXMC.jpg
    615.3 KB · Views: 186
  • GTAC COnversion.jpg
    GTAC COnversion.jpg
    513.1 KB · Views: 177
Last edited:
  • Like
Reactions: CDM1972, beenjammin, Darkside-Six and 2 others
#8,059
MNTC said:
All you AXSR guys that are looking for bolt bodies, EO has them listed on the site now to backorder. I'm sure they won't last long when in stock so I would pre-order/backorder them if your looking.
Click to expand...
Fun Fact #2: So are the AXSR forends.

I was looking at the prices for the AXSR assemblies and the FP/Shroud parts. I’m wondering if the “assembly” is just the bolt body (rather than the complete assembly like with the MC) and the FP/Shroud part is then also required to make a completed assembly (bolt body, shroud, FP). ...which is what it seems like and would put a complete AXSR bolt assembly way more than a complete AXMC assembly.
 
#8,060
M8541Reaper said:
Fun Fact #2: So are the AXSR forends.

I was looking at the prices for the AXSR assemblies and the FP/Shroud parts. I’m wondering if the “assembly” is just the bolt body (rather than the complete assembly like with the MC) and the FP/Shroud part is then also required to make a completed assembly (bolt body, shroud, FP). ...which is what it seems like and would put a complete AXSR bolt assembly way more than a complete AXMC assembly.
Click to expand...

Looks to me the bolt body is by itself. Just like the AXMC bolt bodies. Same pricing at $681 for the MC and SR. The firing pin and shroud assembly are also the same pricing as the AXMC. Both at $510. So both those together would get you the complete setup. Both for the AXMC and AXSR. Pricing didn't change.

If your looking for a complete SFP drop in and go assembly for the AXMC they are $860. But the bolt bodies themselves and parts individually are the same for the MC and SR.
 
  • Like
Reactions: M8541Reaper
#8,062
tex68w said:
Who makes that suppressor cover? Thoughts on it?
Click to expand...

Liberty's Defense.

Honestly, I never owned a cover until 2020. I bought one these to try out, then I ordered 7 or 8 more. It's made of all sorts of mineral and rock so it won't melt on you, and it locks up tight.

I'm a believer in this brand, but I'm bias.
 
  • Like
Reactions: RS14 and Tex68w
#8,063
SkyScrapin said:
Liberty's Defense.

Honestly, I never owned a cover until 2020. I bought one these to try out, then I ordered 7 or 8 more. It's made of all sorts of mineral and rock so it won't melt on you, and it locks up tight.

I'm a believer in this brand, but I'm bias.
Click to expand...

I like what I see and reviews are fantastic, the price is a bit alarming but I might give one a whirl for the Ultra 7 can.
 
#8,075
Serious question guys. I haven't ever shot 338LM and the AXMC came with the factory barrel and bolt, so set up to send those downrange. I know the fundamentals are key for bigger stuff and have been working one that with my AX and now the MC. What factory ammo has performed best for you guys out of the factory barrels? With ammo prices so high, and being in this fucktard state, I don't want to buy the wrong stuff.
What are your ammo suggestions for factory 338LM 27" factory barrel?
Thank you in advance and stay safe.
Tack
 
#8,076
Tack425 said:
Serious question guys. I haven't ever shot 338LM and the AXMC came with the factory barrel and bolt, so set up to send those downrange. I know the fundamentals are key for bigger stuff and have been working one that with my AX and now the MC. What factory ammo has performed best for you guys out of the factory barrels? With ammo prices so high, and being in this fucktard state, I don't want to buy the wrong stuff.
What are your ammo suggestions for factory 338LM 27" factory barrel?
Thank you in advance and stay safe.
Tack
Click to expand...
I've had good luck with the factory Lapua 250 gr SCENAR.
 
  • Like
Reactions: CHEYTAC and Tack425
#8,080
Tack425 said:
Serious question guys. I haven't ever shot 338LM and the AXMC came with the factory barrel and bolt, so set up to send those downrange. I know the fundamentals are key for bigger stuff and have been working one that with my AX and now the MC. What factory ammo has performed best for you guys out of the factory barrels? With ammo prices so high, and being in this fucktard state, I don't want to buy the wrong stuff.
What are your ammo suggestions for factory 338LM 27" factory barrel?
Thank you in advance and stay safe.
Tack
Click to expand...
LAPUA 250 scenar or RUAG 250 target , mine holds .5 moa @ 1000 yards with either
 
  • Like
Reactions: carlm338 and Tack425
#8,095
Anyone use an Atlas Super CAL on an AT? I'm thinking of picking one up for my AT and I'd love to see a picture of what the rifle looks like with the Super CAL mounted. Not for PRS style matches, will be used for prone shooting such as informal mid-range F-Class.
I've been through this thread and if there's a picture with this set up I missed it.

Thanks.
 
#8,096
I think I'm at the point in this journey where I need to have an AI. I want this AI to be more of a functional sniper rifle than a PRS rig. I like my current 6.5CM Bergara/KRG just fine but I may want to explore .308 because I shot a lot of it in the Army and I want to relive my glory days lol. Some people buy Corvettes in their 40s, I want an AI (and a Porsche if we're being honest). I love the look of the AT with the thumbhole stock so that's what I'll aspire to purchase. Caliber is the only decision left. .308 20", .308 24", or 6.5CM 24"? Stick with the flatter shooting 6.5CM? Shooting will be movers out to 250, pop ups out to 350 and and steel out to 1000. Yeah, I could do this with an AR10 but why not make it more fun with an AI?
 
#8,097
Anonymoose said:
I think I'm at the point in this journey where I need to have an AI. I want this AI to be more of a functional sniper rifle than a PRS rig. I like my current 6.5CM Bergara/KRG just fine but I may want to explore .308 because I shot a lot of it in the Army and I want to relive my glory days lol. Some people buy Corvettes in their 40s, I want an AI (and a Porsche if we're being honest). I love the look of the AT with the thumbhole stock so that's what I'll aspire to purchase. Caliber is the only decision left. .308 20", .308 24", or 6.5CM 24"? Stick with the flatter shooting 6.5CM? Shooting will be movers out to 250, pop ups out to 350 and and steel out to 1000. Yeah, I could do this with an AR10 but why not make it more fun with an AI?
Click to expand...
The fun part is that you don’t have to choose man. Why not snag all three barrels? Having to choose is soooo 1990 😂
 
  • Like
  • Haha
Reactions: MACHTECH, Huskydriver and BLKWLFK9
You must log in or register to reply here.

Similar threads

austino775
The AI Arctic Warfare Picture Thread
Replies
83
Views
4K
Bacarrat
Bacarrat
5
Firearms SOLD Accuracy International AT 6.5 Creedmoor
Replies
6
Views
1K
556mtjones
5
Mj30wilson900
Accuracy international at-x .22 creed
Replies
5
Views
759
Patrice Dauffer
P
5
Firearms 308 GAP700, Accuracy International Chassis
Replies
21
Views
3K
556mtjones
5
MikeinNC
SOLD Accuracy International 6.5mm Creedmoor 20” AXSR barrel, 1-8” twist, 5/8x24, Elite Sand, New $600
Replies
1
Views
248
MikeinNC
MikeinNC
Top Bottom
Back
Home
Forums
Merch
Alerts