T

tekmann2377

Full Member Minuteman
Private 41 From OH
Messages
236
Featured content
0
Reaction score
263
XP
6
Level
1
Joined
Last seen

Latest activity Postings Featured content About Feedback Stats

    • T
      tekmann2377 replied to the thread 6.5 PRC Loads.
      I would give the barrel a little while Mine sped up over the first 50 rds. I think you will settle on either N565 or H1000. They are...
    • T
      tekmann2377 replied to the thread 22 creedmoor.
      While some may disagree, if you were seeing velocities in the 3450+ range with H4350, I do think it may have just been too hot. Pushing...
    • T
      tekmann2377 replied to the thread .308 Winchester.
      A reduced load for H4895 or IMR 4895 under a Hornady 125 SST is your huckleberry for this. Shoot for a starting velocity of 2500-2600...
    • T
      tekmann2377 replied to the thread 8208xbr thoughts.
      It is an good powder, but has some quirks. It meters better than Varget, but worse than ball powders. Generally best accuracy is...
    • T
      tekmann2377 replied to the thread The Easy Button for overgassed AR-10s: Bootleg BCG Review.
      Ahh the return of the $530 rifle that needs a $300+ adjustable BCG and $150 buffer to try and get it to run properly. How has the...
    • T
      tekmann2377 replied to the thread Strongest bore cleaner available.
      Without getting into the endless debates about cleaning frequency or methods, the strongest non-abrasive cleaner I know of for copper...
    • T
      tekmann2377 replied to the thread Knights Armament SR25 6.5 Creedmoor.
      So not sure if you would consider this an option (mainly because so many of the SR-25's are unobtanium) - you could always put a MWS...
    • T
      tekmann2377 replied to the thread Wilson Combat barrels.
      I had a Wilson Combat barrel, a 16" 300 BLK with carbine gas. It shot fine and was reliable with supers, but I replaced it with a pistol...
    • T
      tekmann2377 replied to the thread AR 10 Advice.
      BTW it doesn't cost that much to get the barrel chopped. Adco can do it for something like $75 + shipping as long as you pull it yourself.
    • T
      tekmann2377 replied to the thread AR 10 Advice.
      You would be very well served to heed the advice above. Reliability is superior with a rifle gas system even with 16" barrels. As a...
    • T
      tekmann2377 replied to the thread 243 AR cycling issues.
      I would be concerned about the APF BCG. Good ejection and extraction is an interplay between being dwell time, appropriate gassing, and...
    • T
      tekmann2377 replied to the thread New here. New build..
      Your goals and the multiple calibers you would like to use with a single build are really going to hamper you in refining the rifle for...
    • T
      tekmann2377 replied to the thread 22 creedmoor.
      I think that 41 grains of H4350 is a little high for a start point... While everyone's rifle is different, that exceeds Hornady and...
    • T
      tekmann2377 replied to the thread Struggling with 5.56.
      N135 is a better burn rate than N140 for your application. Vihta has improved the temperature stability of their 100 series powders...
    • T
      tekmann2377 replied to the thread 6.5 Creedmoor 100gr ELD-VT + Varget Load Development.
      I don't know if you can exclusively blame the powder, yours loads are way, way, way too hot. I have never seen good accuracy or ES/SD...
    Show older items
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back
Home
Forums
Merch
Alerts