• Online Training Rescheduled: Join Us Next Week And Get 25% Off Access

    Use code FRIDAY25 and SATURDAY25 to get 25% off access to Frank’s online training. Want a better deal? Subscribe to get 50% off.

    Get Access Subscribe

Recent content by apis

  1. A

    Gunsmithing 308 Bisley reamer print

    Re: 308 Bisley reamer print <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ffl medic</div><div class="ubbcode-body">I have that reamer from PTG. I don't have the print (I don't think I do anyways...). Call Dave at PTG. </div></div> I will give Dave a call...
  2. A

    Gunsmithing 308 Bisley reamer print

    I was hoping that someone might have a 308 Bisley reamer print that they could post. I have searched and have not been able to find it. Thank you.
  3. A

    Manners mini chassis

    I am interested in buying a Manners T4a stock with the mini chassis. I would like to get input from people that have used a Manners stock with the chassis. What kind of accuracy are you getting with the chassis? Have any of you compared the same barreled action in a bedded stock and a stock with...
  4. A

    problem with accuracy

    Re: problem with accuracy Is JB bore paste good for a carbon problem or is that something I should stay away from?
  5. A

    problem with accuracy

    Re: problem with accuracy <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: wnroscoe</div><div class="ubbcode-body">Handloads or factory ammo? If handloads, how many firings on the brass? Isso bore paste works wonders in the throat if in fact it's a carbon issue...
  6. A

    problem with accuracy

    Re: problem with accuracy I only have 700 rounds through the barrel.I am only using 43.5 grains of Varget behind a 175 SMK. I have cleaned the barrel very well to make sure that is not the problem.I clean every 100 to 150 rounds. Maybe I need to give the throat a little more attention. Iam...
  7. A

    problem with accuracy

    Re: problem with accuracy Iam using Boretech Eliminator and it seems to do a good job of cleaning the copper and carbon. Maybe I should try something else to see if that will work. Would a shot out barrel cause this problem? I have heard that some barrels can be shot out early if the blanks...
  8. A

    problem with accuracy

    Re: problem with accuracy I forgot to mention that. I did clean the bore. It is happening with a clean bore and a dirty bore.
  9. A

    problem with accuracy

    I had a Remington 700 308 worked on about 6 months ago.(rebarreled,action trued,stock bedded)When I got the rifle back it shot great. I was able to keep the shots within .5 moa at 100 yards most of the time. At about 700 rounds I have started to have problems. The first 5 shots out of a cold...
  10. A

    Bushing size for 223 Lapua and 77 grain SMK

    Re: Bushing size for 223 Lapua and 77 grain SMK What is the outside diameter of a loaded round using Lapua brass and a .224 bullet? I have read that it is good to use a bushing .004 smaller than a loaded round when using the ammunition in an AR15.
  11. A

    Bushing size for 223 Lapua and 77 grain SMK

    Re: Bushing size for 223 Lapua and 77 grain SMK I ment to say that it will be a full length bushing die.
  12. A

    Bushing size for 223 Lapua and 77 grain SMK

    I want to use a Redding S type bushing die. What bushing size do I need for this combination. The ammunition will be shot out of an AR. Thanks.
  13. A

    Bumping the shoulder on a loaded round

    I have about 80 rounds that I loaded for my 700P before I sent it to GA Precision to be rebarreled that I forgot about. The rounds do not fit the new chamber. To get the old rounds to chamber I would need to bump the shoulder .005. I have a Redding s type match full length sizing die that I can...
  14. A

    Problem with Redding competition shell holders

    Re: Problem with Redding competition shell holders <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Winchester 69</div><div class="ubbcode-body">Severe cam-over can break your press. It is only necessary to seat the shell holder firmly against the base of the die...
  15. A

    Problem with Redding competition shell holders

    Re: Problem with Redding competition shell holders <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: beekeeper77</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Short Round</div><div...
See more
Top Bottom
Back
Home
Forums
Merch
Alerts