Recent content by briang7511

  1. briang7511

    Vihtavuori in a 6 gt

    over a large sample, ES around 20, SD around 6
  2. briang7511

    Vihtavuori in a 6 gt

    i am at 32.8g of N150, 105 hybrid, cci br, 2880fps, 26in bartlein started jump on fresh barrel at about .070
  3. briang7511

    SAC And 419 Dies

    This is something that is measurable, which i did not really consider. Thankyou for the the reply. Down range performance, lets say group sizes at 1k yards are smaller or more consistent, less flyers. I have the SAC OAL tools. Great product. Before i purchased those, the hornady tools were...
  4. briang7511

    SAC And 419 Dies

    I have read alot of comparison between the two sets of dies across 3 pages so far. one of the important factors i have yet to read about is downrange performance. Anyone have some measurable down range performance comparing the two sets of dies against the cheaper sets of dies?
  5. briang7511

    77 SMK load recommendations

    yes. http://www.natoreloading.com/n140/ i believe my load is at 24.0g of N140 with a 20in barrel/upper from white oak armament. norma brass 77smk.
  6. briang7511

    Vihtavuori in a 6 gt

    26in. 900 ft. 26in. 900ft
  7. briang7511

    Vihtavuori in a 6 gt

    The powder charge for N150 is on the high side for quickload. My real world performance over 3 barrels, 2 of them were bartlein, they ran 2890fps with 32.8g of N150 and the other barrel was a shilen which liked 32.0 of N150 @ 2860 fps.
  8. briang7511

    SOLD BA 16" 223 WYLDE PREMIUM BLACK SERIES BARREL

    Who is the barrel manufacturer?
  9. briang7511

    lapua 6gt availability

    Lapua website says available in the fall. Seen a supplier (midsouth) that has the brass available on backorder. Has anyone seen an actual release date yet?
  10. briang7511

    Do you use expanding mandrels after a full-length bushing die for neck sizing?

    Using lapua 6.5cm, 6.5x47 and hornady 6gt. Using annealeze. all brass weight sorted within 1g, using berger bullets straight from the box. 140 hybrids do not show the vertical stringing as much as the 105 hybrids in the gt and hornady brass at 1k. I appreciate the interest and wish to...
  11. briang7511

    Do you use expanding mandrels after a full-length bushing die for neck sizing?

    My performance is measured out to 1000y. My rabbit hole is trying to keep es/sd as low as that magical second firing on brass. annealing has helped a lot, but i cant quite keep the numbers as good after 4th firing and beyond, compared to 2nd firing. 2nd firing i can hold avg groups around...
  12. briang7511

    Do you use expanding mandrels after a full-length bushing die for neck sizing?

    I have tried this with the wilson mandrel after sizing. i saw no difference in range performance when using just the die. i have not tried different sizes, my dies and mandrel are .002 under bullet dia. Now I only use the mandrel with new brass.
  13. briang7511

    SOLD Aero Solus action w/standard .478 bolt face

    Patriot valley arms has a sale. I would look into them. https://www.snipershide.com/shooting/threads/pva-solus-barreled-action-launch-sale.7195955/
  14. briang7511

    WTB Short action 308b/f

    check patriot valley arms. they had a deal on the solus. https://patriotvalleyarms.com/solus-barreled-action/
  15. briang7511

    SOLD 26" 223 7tw Savage prefit

    Who manufactured the barrel? round count?
See more
Top Bottom
Back
Home
Forums
Merch
Alerts