Recent content by Gtar

  1. Gtar

    Ingenuity Precision trickler

    This is the issue with a lot of small manufacturers/inventors. Coming up with a product is one thing, the whole process of preparing and bringing it to market is a whole lot more difficult. The IP trickler outdoes anything I've seen on the market for quality of design and particularly the...
  2. Gtar

    Vudoo Mag Extension

    Yes it does. I just made some 14 round ones, they need the spring stretched but work fine. I'll upload them as well at some stage once I've run them for a while. I've shot 2 matches with them now and they feed really well. Also nice to have a wider flat base on them.
  3. Gtar

    Best arca rail attachment with bag ????

    I designed it to use some M5 sheetmetal spot weld nuts, there's a recess in the bottom for them to sit into. 3/16 UNC would be around the same size. You can download it at https://www.thingiverse.com/thing:5867111
  4. Gtar

    Garmin Xero accessories only

    When I bought my Kestrel it came in a TYR Tactical pouch that fitted the wind vane and accessories which I rarely use. The pouch is a really good fit for the Xero with the Area 419 mount and the little tripod, it even has a pocket for the charging cable.
  5. Gtar

    Rimfire Rifle Photos Thread

    My early Vudoo V22. MPA BA comp, Jewel HVR trigger, Lowey Tuner, 40 MOA rail, Gen 2 Razor, lots of weights. It's an awesome little rifle.
  6. Gtar

    chassis LA-101 Lithgow rifle

    I'm trying to. I only have one mill running at the moment and it always seems to have something else to make. I just picked another one which I need to get up and running, hopefully it won't be too far away.
  7. Gtar

    Frankford Arsenal case trimmer upgrades

    No problem (y) I haven't had much to do with smaller lathes, I've got an old Colchester Master and it does pretty much anything I need to do. For the time it would take someone to do it for you it's probably about a 6-pack and you could drink half. The best improvement to the trimmer is the...
  8. Gtar

    Ingenuity Precision trickler

    I don't know if I got lucky but mine came with a motor?
  9. Gtar

    Frankford Arsenal case trimmer upgrades

    No problem, from memory it's a quick lathe job to remove the taper on the inside of the case holder to allow the ugly pilots to slide in, I think I took a little off the OD threaded end as well so the case mouth sits close enough to the trimmer blade, the flange on the pilot moves the case a bit...
  10. Gtar

    Vudoo Gun Works V-22 Rimfire Bolt Action

    Yep, sure is (y)
  11. Gtar

    223 Ackley Improved

    Just as a test, remove your decapping pin/expander and run a couple of cases through and see where you end up measurement-wise.
  12. Gtar

    Vudoo Gun Works V-22 Rimfire Bolt Action

    The more I shoot this rifle, the more I like it. 32.5 mils elevation to 500m with Center-X. It was averaging 7/10 hits on the 500 x 750mm plate at 500m. The hit indicator was lucky to survive :)
  13. Gtar

    223 Ackley Improved

    I'm using BR4's in mine. SD's are single digit and I've never had a primer issue. The firing pin hole is bushed for a .062" firing pin as well.
  14. Gtar

    Who’s done the full run?

    Yep, nothing really changed apart from the group size. I would have spent more time playing with it but it's plenty good enough to ding steel. I might shoot some F-class matches with it next year and spend some time getting it really dialled in. The tuner made a lot more difference on the...
  15. Gtar

    Who’s done the full run?

    Yep, changed from the 6 o-clock on the diamond to 3 o-clock for that row so the shots were on the paper and not between the 2 sheets.
See more
Top Bottom
Back
Home
Forums
Merch
Alerts