Precision Rifle Gear Anybody making a bag rider for the ACC Elite?

K

KnowNothing256

Supporter
Supporter
Full Member
Minuteman
    • Jan 9, 2020
    2,309
    1,515
    #1
    Picked up an ACC Elite and got MDT’s aluminum bag rider with it (among other widgets). Problem is, the bag rider angles downward from back to front, and I’m looking for one that has a bottom surface parallel to the bore.

    I could do a lot of internet searching, but thought the Hide might know an outfit who makes what I want. Thanks for any help in advance.
     
    #4
    Made a simple one, just dont want the chassis to hit the ground every time when I go prone.
     

    Attachments

    • 2024-02-09 21.36.13.jpg
      2024-02-09 21.36.13.jpg
      477.4 KB · Views: 417
    • Like
    Reactions: Stoweit, RS14 and KnowNothing256
    #8
    Baron23 said:
    This has been mentioned to MDT a number of times and it blows my mind that they don't get that their bag rider for the Premier is just not suitable to the Elite due to slant. It would take an engineer how long to modify the CAD data to do this? sigh
    Click to expand...
    Yep, I was pretty annoyed when I bolted it on. I'm sure they'll get there, it's gotta be a little glaring to their product management team when their flagship shooters are running 3D printed parts that compete directly with the MDT official stuff. I get that SKU minimization is important, but angled vs straight bag riders are not a new concept. I do think that the precision shooting community isn't necessarily aligned on which is best though, some people like that the angle provides them more rear bag range; I think tripod rear might make the issue more obvious.

    C'est la vie.
     
    • Like
    Reactions: st1650, Craig Brown and Baron23
    #12
    I made one out of delrin because I’m too impatient to order the one from Australian precision
    australiantacticalprecision.com.au

    ATP Australia Ultimate Bag Rider for MDT ACC Elite Chassis

    We only use quality gear at Australian Tactical Precision (ATP), this principal also extends to the products we manufacture. One size does not fit all, that also applies to bag riders. There are many rear bag manufacturers out there and the spacing between the ears can be significantly...
    australiantacticalprecision.com.au australiantacticalprecision.com.au
     
    • Like
    Reactions: st1650 and Baron23
    #13
    Mongo68 said:
    I made one out of delrin because I’m too impatient to order the one from Australian precision
    australiantacticalprecision.com.au

    ATP Australia Ultimate Bag Rider for MDT ACC Elite Chassis

    We only use quality gear at Australian Tactical Precision (ATP), this principal also extends to the products we manufacture. One size does not fit all, that also applies to bag riders. There are many rear bag manufacturers out there and the spacing between the ears can be significantly...
    australiantacticalprecision.com.au australiantacticalprecision.com.au
    Click to expand...
    Ah, that was basically exactly I was hoping to find stateside, oh well. Thanks for the info!
     
    #25
    4O6shootist said:
    The acc elite is flat mounting plate, not angled like previous gens. I for one, strongly dislike angle in a bag rider.
    Click to expand...
    Yeah, MDT just cheaped out and used the rider from the Premier and though that customers would be...happy? Not notice? Dunno, cause it just seems stupid to me. The Premier bag rider is in CAD....we know it is. This is like 5 minutes of work to modify the existing CAD file to reflect the horizontal bottom of the Elite butt stock.

    Maybe they had a bunch of the Premier bag riders batch made and need to move them? Cause, for the life of me, I don't understand why this isn't already resolved.
     
    • Like
    Reactions: giumau1
    #26
    I even reached out to mdt because they all run the same one that Chad from 5x5 makes.. I was told it's a prototype and they don't know if they will release it. I contacted Chad he said he isn't sure if he is gonna make and sell them.. I really like his design though because it doesn't hang over the front very much at all
     
    #28
    NFshooter150 said:
    Hey so who did you get this made from? It looked like you tagged secant but I reached out and he said he's the wrong guy
    Click to expand...
    He just tagged me because I asked for the link. Below is Brandt Built's website.

    Cant Indicator | Brandt Built Concepts

    Ocular mounted cant indicator for precision long range, Brandt built concepts
    www.brandtbuiltconcepts.com www.brandtbuiltconcepts.com

    I forgot about this thread when you reached out. Too early for my PM response to you, haha.
     
    #29

    ACC Elite bag rider here for sale now.

    CNC machined 6061-T6 Aluminum and Cerakote finish matched to the factory black.


    Flat bottom with full radius edge for ideal tripod rear support engagement. Top surface has grip ridge texture to it (smooth). Does not stick out at all presenting any snagging surfaces. Tapers to match the grip support width. All other edges have a radius and are smooth.


    Attaches with 2 MLOK fasteners (provided) into the MLOK slot on the bottom of the MDT rear stock. 4.9oz weight.


    Tested by a top 10 PRS shooter. Everyone is happy. Get yours now.

    1000001256.jpg
     
    • Like
    Reactions: giumau1 and Covertnoob5
    #30
    McLeod_Precision said:

    ACC Elite bag rider here for sale now.

    CNC machined 6061-T6 Aluminum and Cerakote finish matched to the factory black.


    Flat bottom with full radius edge for ideal tripod rear support engagement. Top surface has grip ridge texture to it (smooth). Does not stick out at all presenting any snagging surfaces. Tapers to match the grip support width. All other edges have a radius and are smooth.


    Attaches with 2 MLOK fasteners (provided) into the MLOK slot on the bottom of the MDT rear stock. 4.9oz weight.


    Tested by a top 10 PRS shooter. Everyone is happy. Get yours now.

    View attachment 8430054
    Click to expand...
    Is the bottom surface parallel to the ARCA on the forend?
     
    #31
    KnowNothing256 said:
    Is the bottom surface parallel to the ARCA on the forend?
    Click to expand...
    It creates a flat plane across the bottom of the rear stock. No relation to barrel axis, however it is very close to that axis.

    Provides a 6.4" long flat area with a radius edge to engage rear tripod. The bag engagement part is a bonus. These chassis without a bag rider only leave a few inches of area in the rear where you are basically up in your armpit engaging tripod rear support.

    In fact all, of our testing was around tripod rear support. Everyone has a place to engage they feel comfortable and stable and the full 6.4" length gives that room. Also this does not present a snag point like some of the other attempts I have seen at shorter versions.

    The bag engagement is great too, but not much surprising there.
     
    #34
    McLeod_Precision said:
    It creates a flat plane across the bottom of the rear stock. No relation to barrel axis, however it is very close to that axis.

    Provides a 6.4" long flat area with a radius edge to engage rear tripod. The bag engagement part is a bonus. These chassis without a bag rider only leave a few inches of area in the rear where you are basically up in your armpit engaging tripod rear support.

    In fact all, of our testing was around tripod rear support. Everyone has a place to engage they feel comfortable and stable and the full 6.4" length gives that room. Also this does not present a snag point like some of the other attempts I have seen at shorter versions.

    The bag engagement is great too, but not much surprising there.
    Click to expand...
    I appreciate the info! Tripod rear is roughly half of my use case, but rear bag is the other half. One thing I don't want is elevation changes when the rifle travels rearward, which is why it's important to me that the bottom surface of the bag rider be parallel to the bore. As I mention at the top of this thread, the current MDT offering fails to achieve this requirement; it will tend to tip the muzzle downward under recoil. It would be better for me to run no bag rider at all than to have this issue.
     
    #38
    McLeod_Precision said:
    It creates a flat plane across the bottom of the rear stock. No relation to barrel axis, however it is very close to that axis.

    Provides a 6.4" long flat area with a radius edge to engage rear tripod. The bag engagement part is a bonus. These chassis without a bag rider only leave a few inches of area in the rear where you are basically up in your armpit engaging tripod rear support.

    In fact all, of our testing was around tripod rear support. Everyone has a place to engage they feel comfortable and stable and the full 6.4" length gives that room. Also this does not present a snag point like some of the other attempts I have seen at shorter versions.

    The bag engagement is great too, but not much surprising there.
    Click to expand...
    Any reason why no mlok recoil lug?
     
    • Like
    Reactions: Schütze
    #43
    KnowNothing256 said:
    He just prints stuff for his friends, but u I can ask if he wants to turn a bit of a profit.

    I’ve run it in a couple matches now, I do really like it. Very solid, angle is perfect.

    ETA: Sorry about the typo, that sounded really rude. Just a typo, my bad!
    Click to expand...
    I would be interested if you could see if he would make me one. Id be happy to buy it!
     
    #44
    Michael from Vantage here - I made these specifically for this use case as I see they were posted above:


    More of them are getting out there in the wild and we're getting great feedback from them in the field. Some highlights are that they are purposefully designed to fit the bottom contour of the ACC Elite, fit flush, add minimal weight, and drive recoil parallel to the bore axis.

    I'm not surfing the hide as much as I should, but shoot me an email at [email protected] for a hide discount on these.
     

    Attachments

    • 1000010921.jpg
      1000010921.jpg
      257.1 KB · Views: 57
    • 1000010923.jpg
      1000010923.jpg
      287.8 KB · Views: 52
    • image_123650291 (1).JPG
      image_123650291 (1).JPG
      421.5 KB · Views: 57
    • image_123650291.JPG
      image_123650291.JPG
      434 KB · Views: 62
    • Like
    Reactions: KnowNothing256
    #45
    Vantage Reloading said:
    Michael from Vantage here - I made these specifically for this use case as I see they were posted above:


    More of them are getting out there in the wild and we're getting great feedback from them in the field. Some highlights are that they are purposefully designed to fit the bottom contour of the ACC Elite, fit flush, add minimal weight, and drive recoil parallel to the bore axis.

    I'm not surfing the hide as much as I should, but shoot me an email at [email protected] for a hide discount on these.
    Click to expand...
    Any chance you could custom make them so there is just like a little nub that protrudes in the front rather than like an inch?
     
    You must log in or register to reply here.

    Similar threads

    Albrecht 65!
    Accessories MDT ACC Elite Bag Rider
    Replies
    8
    Views
    421
    NFshooter150
    N
    McLeod_Precision
    Accessories MDT ACC Elite - Bag Rider V1 by McLeod Precision
    Replies
    43
    Views
    1K
    McLeod_Precision
    McLeod_Precision
    NiteQwill
    SOLD MDT ACC Elite Bag Rider (2)
    Replies
    1
    Views
    115
    SdotW
    S
    4O6shootist
    Precision Rifle Gear Xlr heavy bag rider?
    Replies
    4
    Views
    492
    4O6shootist
    4O6shootist
    S
    SOLD MDT ACC Elite Chassis with extras - Black
    Replies
    3
    Views
    650
    shootertom
    S
    Top Bottom
    Back
    Home
    Forums
    Merch
    Alerts