About $350, the Sidekick only needs a USB-C connector, no battery cell or cap system
-
Having trouble using the site?
Post any issues in the thread below or reach out directly to support!
Contact support
Night Vision Custom USB power supply options for Thermal and NV
- Thread starter CoryT
- Start date
Fischer split cable for DTNVS/E-COTI on a Nocturn Bat Pack, also available as a Lemo connector version. Split cable to power a EoTech Clip-IR/ Vortex 4000 LRF from USB. Lemo cable and battery adapter for the IR Patrol series. All plugs can be 90 degree or straight, voltage regulated if required for use with a USB pack . All Lemo, Fischer and DC type plugs are supported, as well as USB connections. Battery adapters and caps are 3D printed in engineering tough resins or Nylon.
The cords would work, but the RH25 on the left side would need to be flipped over using the Iray AC53 obverse shoe. This would put the connector facing outboard, as opposed to directly into the side of the right hand unit.
Hey Cory, do you have any capability to do custom remote cables like for NGALs, Wilcox Ergocto devices, etc?
With the proprietary connectors and keypad circuitry, those are outside what I can do.
Roger that. Pretty frustrated with lack of certain available NGAL switches and the remote that comes with the new MRF is retarded. 10” too long and no right angle plug.
Hi Cory. I have a L3 PVS-14 (right eye) and a RH25 (left eye using the AC53) that I would like to run off an external battery pack. Would you be able to create a cable(s) for that? If so, could you let me know about how much that would cost?
I
I can make a splitter system for that, though the PVS-14 runtime is such that it's hardly required. Message me with length you want to the split, then length to the pack. I'll also need the type of battery pack, a USB pack, AB Nightvision GOBP, Argus, L3, Nocturn Bat Pack, other. complete system will run about $450-500, RH25/USB cable only round $150
New cable setup to run a Manticore-R with E-COTI off either a standard battery pack or a USB battery. QD on the splitter so it can mix/match at will.
I'm new to snipers hide so I do t know how to contact you on here. I have a lwts clip on thermal that I would like a battery pack made for.
Email at [email protected]. Depending on the actual version of LTWS, I should be able to make one up.
Similar threads
