EuroOptic has AI 308 Win complete bolts in stock (0 left)

Firestarter123 · Jul 11, 2024

These seem to be incredibly hard to find.

https://www.eurooptic.com/26547BL-AI-Accuracy-International-Bolt-A.aspx

ETA: Where's the go to place to get these converted to a WSM case head?

jbuck88 · Jul 11, 2024

Well. You cost me a grand I wasn't planning on spending today.

stanley_white · Jul 11, 2024

Does one buy this as a general replacement part or because they need the small firing pin capability or both?

(New AI AT / 308 owner here.)

-Stan

Firestarter123 · Jul 11, 2024

jbuck88 said:
Well. You cost me a grand I wasn't planning on spending today.

I hear you

I haven’t seen them in stock for years and was finally going to cave and backorder one. When it wouldn’t let me put a down payment on it I was confused, asked a rep on chat, and he said they were in stock.

I was like

and ordered very quickly.

jbuck88 · Jul 11, 2024

Can't speak to anyone else. I got one incase I want to run a 7 saum down the road. They haven't been popping up that often.

Firestarter123 · Jul 11, 2024

stanley_white said:
Does one buy this as a general replacement part or because they need the small firing pin capability or both?

(New AI AT / 308 owner here.)

-Stan

There are a few reasons:
1) Spare bolt in case you pit the bolt face or pierce primers and kill the firing pin
2) Replace the bolt of an early AT with the LFP if you’ll be shooting small primer calibers
3) Send it off to have the bolt face opened up for magnum short action calibers like 300WSM

Shoots 700's · Jul 11, 2024

Firestarter123 said:
There are a few reasons:
1) Spare bolt in case you put the bolt face or kill the firing pin
2) Replace the bolt of an early AT with the LFP if you’ll be shooting small primer calibers
3) Send it off to have the bolt face opened up for magnum short action calibers like 300WSM

Who’s doing the bolt face conversions?

Firestarter123 · Jul 11, 2024

Shoots 700's said:
Who’s doing the bolt face conversions?

Last I knew Black Canyon Customs was doing them.

https://www.blackcanyoncustoms.com/

stanley_white · Jul 11, 2024

Firestarter123 said:
There are a few reasons:
1) Spare bolt in case you put the bolt face or kill the firing pin
2) Replace the bolt of an early AT with the LFP if you’ll be shooting small primer calibers
3) Send it off to have the bolt face opened up for magnum short action calibers like 300WSM

Thank you!

-Stan

kthomas · Jul 11, 2024

$1,000 for a bolt

M8541Reaper · Jul 11, 2024

Best advice for snagging anything in limited stock for an AI…
Preorder/backorder from EO or have alerts setup. Buy the second you get the notification. If you wait until you get home or after work, they’ll be gone.

Firestarter123 · Jul 11, 2024

kthomas said:
$1,000 for a bolt

Yeah it’s painful. Free shipping and them covering tax helped.

kthomas · Jul 11, 2024

Firestarter123 said:
Yeah it’s painful. Free shipping and them covering tax helped.

Gotta pay that AI tax though, yikes...

Firestarter123 · Jul 20, 2024

I am kind of surprised, however, I just tried function testing the bolt in my rifles.

It is perfect in the 2015 (SFP) actionhowever, it sticks rather hard in my 2014 (LFP) action.

It appears that it’s the firing pin assembly as the bolt body itself is fine. When I put the firing pin assembly from the 2015 bolt into the new body it’s fine. When I put the new firing pin assembly into the 2015 body and try that in the 2014 action it is almost fine with just a tiny bit of resistance.

I didn’t expect that there’d be any issues but I guess I was wrong.

hafejd30 · Jul 20, 2024

Firestarter123 said:
I am kind of surprised, however, I just tried function testing the bolt in my rifles.

It is perfect in the 2015 (SFP) actionhowever, it sticks rather hard in my 2014 (LFP) action.

It appears that it’s the firing pin assembly as the bolt body itself is fine. When I put the firing pin assembly from the 2015 bolt into the new body it’s fine. When I put the new firing pin assembly into the 2015 body and try that in the 2014 action it is almost fine with just a tiny bit of resistance.

I didn’t expect that there’d be any issues but I guess I was wrong.

I almost bought one for my 2014 AT. My 22 ATX SFP bolt fits perfectly in my 2014 though

Firestarter123 · Jul 20, 2024

hafejd30 said:
I almost bought one for my 2014 AT. My 22 ATX SFP bolt fits perfectly in my 2014 though

It binds about 3/4” from going all the way in. It’s not impossible to finish, however, it’s definitely not smooth like the bolts that came with the rifles.

I guess I’ll see what AINA says and see if they’ll swap out the firing pin assembly for me.

jbuck88 · Jul 20, 2024

Mine showed up at the post office today. So I'll be able to pick it up Monday.

Firestarter123 · Jul 22, 2024

AINA wants the 2014 rifle and the extra bolt assemblies back to look at them.

I think I'll just return the bolt assembly that's tight to EuroOptic as I have no interest in shipping the rifle across the country (after trying to find a box as I don't have one for this rifle) as well as a perfectly functional bolt when all I need is to swap out the firing pin assembly as that's the issue.

jbuck88 · Jul 22, 2024

Forgive me if you already did. But did you clean the action? Could a little bit of carbon or build up in the wronge spot interfere with the new bolt. From what understand the bolts switched from being round to fluted sometime in the 14-16 window.

jbuck88 · Jul 22, 2024

I have a 2015 AX that I bought a small FP bolt for and under the plunger for the ejector was plugged full of shit so it wouldn't move. I'm hoping this one isn't as bad.

Kwe1982 · Jul 22, 2024

I thought Greg at Southern Precision Rifles was the only one doing the bolt conversions, but I've been out of the loop the last year. I had one done as a 300 Blackout a couple years ago.

Firestarter123 · Jul 22, 2024

I've decided to see if EuroOptic could send me a replacement firing pin assembly first since they have some of them in stock.

Kwe1982 said:
I thought Greg at Southern Precision Rifles was the only one doing the bolt conversions, but I've been out of the loop the last year. I had one done as a 300 Blackout a couple years ago.

Black Canyon Customs is the only place opening up bolt faces for magnum calibers now.

Greg is making 223Rem conversions.

Kwe1982 · Jul 22, 2024

@Firestarter123 thanks for the clarification.

Firestarter123 · Jul 22, 2024

jbuck88 said:
Forgive me if you already did. But did you clean the action? Could a little bit of carbon or build up in the wronge spot interfere with the new bolt. From what understand the bolts switched from being round to fluted sometime in the 14-16 window.

I guess I haven't done that but the rifle only has 500rds on it. I suppose that could be my next step.

Here's what I've tried as I have 4 x AI Short Action bolts now:
Both bolts work perfectly in the 2015 rifle with no binding or hiccups of any kind.

The 2014 is a different story though as while 1 of the new bolts works fine the other binds when it’s ~3/4” from being fully inserted. It’s not that it won’t go at all but it requires quite a bit more force than it really should compared to the bolts that came with either rifle.

I took the firing pin assemblies out of both new bolts and tested the bolt bodies by themselves in both rifles and there wasn’t any binding.

I then swapped the firing pin assemblies between the bolt bodies and again both are fine in the 2015, however, a change is that now they both work in the 2014 but each has a small amount of drag in the same place as before.

If I swap the firing pin assemblies back to where the one bolt had a lot of drag, run it forward, and set the safety to the middle position the drag goes away in the 2014 and all is well in the 2015 as well.

The shroud itself doesn’t appear to be dragging on anything.

Firestarter123 · Jul 22, 2024

jbuck88 said:
Mine showed up at the post office today. So I'll be able to pick it up Monday.

@jbuck88

Could you let me know how yours is when you get a chance to try it out and what year your rifle is?

EuroOptic said it's a warranty issue so my only option is to send the complete rifle and both extra bolts into AINA if I want to get it looked at it appears. They can't send out a replacement firing shroud/pin assembly by itself and it didn't sound like I could return the complete bolt assembly either.

I think I'll just mark it as suspect and throw it in the back of the safe for now and ponder what I want to do with it as I really don't want to ship the rifle off just because of a bad firing pin assembly.

jbuck88 · Jul 22, 2024

I wouldn't be afraid to send a rifle to AINA. I had to send one it and it was painless. They sent me a label and ordered a pickup. I sent my other bolt body back to Milehighshooting when the ejector needed cleaned out.

I have a 2015 AX with a LFP bolt and a SFP bolt and 2022 ATX. All of those bolts interchange just fine.

jbuck88 · Jul 22, 2024

It functions just fine in both my rifles. The bolt in my 2015 is noticeably lighter and smoother. But also is broke in.

Looks like euro has more in stock. So maybe they can exchange the whole bolt.

Firestarter123 · Jul 22, 2024

Good deal. I’m glad yours works!

I did call EuroOptic aa couple hours ago when I saw they had more and was told by the person that they have to okay the exchange with the manager who is gone.l so it’d be tomorrow before that could happen.

He said he’d hold one for me, however, the inventory level never changed from before I called until just a few minutes ago so that’s a bit concerning.

jbuck88 · Jul 22, 2024

Euro has helped me with other things and I've had great experiences with their customer service.

TheBigCountry · Jul 22, 2024

This is sad to hear they magically come in now.

Worst timing ever

Lucky Se7en · Jul 23, 2024

Did AINA say they needed your whole rifle? I’m having the same issue and am only sending in the bolt.

MK20 · Jul 23, 2024

I would like one for my 2014. Is everyone having issues with these fitting, or have you guys had good luck with swapping these in?

Firestarter123 · Jul 23, 2024

Lucky Se7en said:
Did AINA say they needed your whole rifle? I’m having the same issue and am only sending in the bolt.

They said I had to ship in the whole rifle.

What year is your rifle?

Firestarter123 · Jul 23, 2024

MK20 said:
I would like one for my 2014. Is everyone having issues with these fitting, or have you guys had good luck with swapping these in?

I think it’s just a tolerance stacking issue as I got 2 of them and 1 of them works fine in my 2014 rifle while both work fine in my 2015 rifle. If I swap firing pin assemblies around both of them work in both rifles.

hafejd30 · Jul 23, 2024

Still in stock. Ordered 2 of them. Definitely call when ordering as they work a better deal then what’s online

I’ll try them in my 22 atx and 14 AT when they arrive. Ones going to be converted to a WSM bolt. The other I plan to use as a SFP bolt for my 2014 AT

Accuracy International Bolt Assembly Complete 308 Win including bolt/shroud assembly with 1.6mm firing pin. MPN 26547BL

Accuracy International Bolt Assembly Complete 308 Win including bolt/shroud assembly with 1.6mm firing pin. MPN 26547BL | Only at EuroOptic.com!

www.eurooptic.com

Firestarter123 · Jul 23, 2024

Euro Optic is taking back my bolt assembly that binds in my 2014 AT and it appears they'll be sending it back to the "vendor" which I'm guessing is AINA.

Hopefully the replacement I'm getting tomorrow works correctly.

hafejd30 · Jul 23, 2024

Firestarter123 said:
Euro Optic is taking back my bolt assembly that binds in my 2014 AT and it appears they'll be sending it back to the "vendor" which I'm guessing is AINA.

Hopefully the replacement I'm getting tomorrow works correctly.

I just tested mine again between my 2014 and 2022. They were exactly the same. Headspace the same, everything. No binding and I had to check which bolt I put back in the correct gun as they were that similar.

Only difference is the AT has a lighter lift with both bolts. But that’s just broken in I assume. The ATX bolt still has the finish on the bolt where the AT is wore and smoothed out from years of use

I have 2 of the models you ordered coming as well. I’ll check both in both guns

Lucky Se7en · Jul 23, 2024

Firestarter123 said:
They said I had to ship in the whole rifle.

What year is your rifle?

I have both a 15 and 22. It gets stuck in different positions in them.

Firestarter123 · Jul 23, 2024

Lucky Se7en said:
I have both a 15 and 22. It gets stuck in different positions in them.

Hmmm...that's interesting...in a bad way.

My replacement bolt has shipped so I should have it tomorrow to test. I'm really hoping it works so that I don't have to send another one back.

I was going to buy another one just because they're available, however, I think I'll pass. If the replacement has issues I'll just send it back for a refund.

It seems that old AI may be best AI which is yet another reason why I don't want to send my rifle to AINA and risk it being lost/stolen/damaged.

On a side note I noticed that the 2014 and 2015 bolt shrouds are machined on the bottom (they're smoother and you can see tiny machining marks from an end mill) while the new bolt shrouds aren't. I doubt it matters but it was just something I noticed.

hafejd30 · Jul 24, 2024

hafejd30 said:
Still in stock. Ordered 2 of them. Definitely call when ordering as they work a better deal then what’s online

I’ll try them in my 22 atx and 14 AT when they arrive. Ones going to be converted to a WSM bolt. The other I plan to use as a SFP bolt for my 2014 AT

Accuracy International Bolt Assembly Complete 308 Win including bolt/shroud assembly with 1.6mm firing pin. MPN 26547BL

Accuracy International Bolt Assembly Complete 308 Win including bolt/shroud assembly with 1.6mm firing pin. MPN 26547BL | Only at EuroOptic.com!

www.eurooptic.com

Damn dude!!!!

Can’t complain about the shipping time here!
24 hours exactly from ordered to my door

Firestarter123 · Jul 24, 2024

I got my replacement today too.

It works perfectly in my 2014 and 2015 AT’s.

hafejd30 · Jul 24, 2024

Verdict is in on mine

2022 ATX:

Both bolts work flawlessly. Headspace exactly the same as my factory bolt off my Mandella Customs 260 Hawk Hill barrel

2014 AT:

Both bolts have a slightly tighter headspace in the gun. Running a factory LW 308 barrel. The bolt closes on a go gauge with slight effort. Zero issue closing on a factory Lapua virgin piece of brass

Very Very satisfied and certainly would recommend picking on up from Euro if you want one. As they aren’t easy to find or at least haven’t been

*In the 2014 AT*

I did find one bolt was completely effortless where the other has the same issue as mentioned above with resistance when almost closed. The pic below shows where the shroud makes very slight contact with the tang of the action. This is 100% where it’s contacting and the pic shows exactly where. A drop of oil on this area and the resistance goes away completely. When you remove the oil you feel it slight rub again. This is absolutely not an issue and definitely where the cause is

Both were dry fired many times and caused no issues with the safety or trigger. These bolts work exactly as they should in my guns

Firestarter123 · Jul 24, 2024

If anyone is looking for a spare trigger MHSA just ordered 5 of them from AI after I asked about getting a spare.

The part # is AI-26895 but they aren't on the website. You'll need to call in to backorder it and payment is due when the order is placed. There's 4 of them remaining after I grabbed one.

Sniperwannabee · Jul 24, 2024

Firestarter123 said:
These seem to be incredibly hard to find.

https://www.eurooptic.com/26547BL-AI-Accuracy-International-Bolt-A.aspx

ETA: Where's the go to place to get these converted to a WSM case head?

@trophyhunter was the first one that ever did the conversation, he did mine in 2021

Firestarter123 · Jul 24, 2024

Sniperwannabee said:
@trophyhunter was the first one that ever did the conversation, he did mine in 2021

~~I believe he stopped doing them and that Black Canyon Customs is the only current option.~~

trophyhunter · Jul 25, 2024

Shoots 700's said:
Who’s doing the bolt face conversions?

We do them
Been running mine for years

Gilbert

trophyhunter · Jul 25, 2024

Firestarter123 said:
I've decided to see if EuroOptic could send me a replacement firing pin assembly first since they have some of them in stock.

Black Canyon Customs is the only place opening up bolt faces for magnum calibers now.

Greg is making 223Rem conversions.

Greg does the 223 conversion

We’ve been and still doing the WSM conversions.

Gilbert

hafejd30 · Jul 26, 2024

Euro is out

@MOUNTIC has a couple left

SOLD - Accuracy International AT/AX 308 SFP Complete Bolt Assemblies

AI AT, AX, and AT-x short action Small Firing Pin complete Bolt assemblies for sale. Just two (now one) left unspoken for out of the lot. These took almost 3 years to get. Available on the website here or PM me if you want to use Venmo, Zelle, or ACH for the cash discount. Card payments...

www.snipershide.com

Firestarter123 · Jul 26, 2024

hafejd30 said:
Euro is out

@MOUNTIC has a couple left

SOLD - Accuracy International AT/AX 308 SFP Complete Bolt Assemblies

AI AT, AX, and AT-x short action Small Firing Pin complete Bolt assemblies for sale. Just two (now one) left unspoken for out of the lot. These took almost 3 years to get. Available on the website here or PM me if you want to use Venmo, Zelle, or ACH for the cash discount. Card payments...

www.snipershide.com

I’m weak

1 left now.

Firestarter123 · Jul 26, 2024

Having trouble using the site?

EuroOptic has AI 308 Win complete bolts in stock (0 left)

Sergeant of the Hide

Full Member

If it ain’t broke, you can’t resist.

Sergeant of the Hide

Full Member

Sergeant of the Hide

Sergeant

Sergeant of the Hide

If it ain’t broke, you can’t resist.

Sergeant

Frozen Sour Patch Kid Cult Leader

Sergeant of the Hide

Sergeant

Sergeant of the Hide

Supporter

Sergeant of the Hide

Full Member

Sergeant of the Hide

Full Member

Full Member

Captain

Sergeant of the Hide

Captain

Sergeant of the Hide

Sergeant of the Hide

Full Member

Full Member

Sergeant of the Hide

Full Member

Green Weenie

Private

Major Member

Sergeant of the Hide

Sergeant of the Hide

Supporter

Sergeant of the Hide

Supporter

Private

Sergeant of the Hide

Supporter

Sergeant of the Hide

Supporter

Sergeant of the Hide

CWO

Sergeant of the Hide

Gun Father

Gun Father

Supporter

Sergeant of the Hide

Sergeant of the Hide

Similar threads