Looks sensational. How does it shoot and how is the weight?
I also oddly enough keep hearing phenomenal reviews about PSA's sabre trigger. Given that it's only $80 i'm tempted to try one.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Offer valid until 9/23! If you have an annual subscription on Sniper's Hide, subscribe below and you'll be refunded the difference.
SubscribeLooks sensational. How does it shoot and how is the weight?
very nice build!
Everything in that photo is 17.0lbs, empty magazine. I do have a set of weights that add another 12oz, making it a lot more stable from a bag.Looks sensational. How does it shoot and how is the weight?
I also oddly enough keep hearing phenomenal reviews about PSA's sabre trigger. Given that it's only $80 i'm tempted to try one.
5# 5ozs, 308win 20", smoke comp stock/grip, Tennessee lower, roam magnesium upper, brigand cf handguard, v7 titanuim bcg/brake and light weight pivot/takedown pins/chargehandle/safety, slr Ti gas block & tt trigger.
possible optic will be as it will stay under 6# and maybe just under 5# 12ozs
View attachment 8453405
It's a 5x optic which will get me to almost 900 yards with the right bullet according to ballistics. I'll probably won't shoot that far, but never know? I just wanted the 10" for velocity.Dang! That’s light, especially with that barrel. Not a knock, use what works for your needs, but why a red dot with a 20” barrel? Or I guess another way to put it “Why so much barrel for something with just a red dot?”
Again, if that works for you, cool. Genuinely curious.
- - -
And BTW, your gun looks like my light(ish) weight AR10 (pencil profile 16” barrel, and a lot of V7, Smoke Composites, etc.), and my uber-light no tax stamp AR15 build (also with a 16” barrel) had a baby that grew up to be bigger than dad!
…sub 4# with a loaded mag and red dot:
That’s pretty cool actually! I knew they made a 3x, but wasn’t tracking on the 5x sight.It's a 5x optic which will get me to almost 900 yards with the right bullet according to ballistics. I'll probably won't shoot that far, but never know? I just wanted the 10" for velocity.
if you're referring to post 1,040 it's an ultradyne and the rear only has windage adjustment, but the front has wind and elevation adjustments.That’s pretty cool actually! I knew they made a 3x, but wasn’t tracking on the 5x sight.
I’ve actually been very impressed with the crispness of their dots, durability, and ability to hold zero with their advanced (higher end) red dots. I have them on a couple of the ranch rifles, and often recommend them to friends/family who want a red dot but don’t want to spend Eotech or Aimpoint money.
I only have one of their OG 1x micro prism sights with the ACSS “Cyclops” reticle on a PCC, and it works well for my needs. It’s used primarily as a longer-range tool that takes the same mags as the G21 I usually carry on the ranch, but don’t have enough rounds through that platform yet to say it’s a keeper.
Would love to get a report down the road on long-term reliability of yours; especially on a heavier caliber rifle.
Also @Top O' Texas what BUIS are you running? Kind of look like Bobro, but can’t quite make ‘em out in your pic.
You need less gas to bring the ejection pattern around to 3-4. not more. 1-2 is over gas or undermass.gave a test run on my AR6.5PRC build and it went well, but could've been better. shot 2 rounds, ejected @ 1-2 oclock, shot 2 more after 5 more clicks out, shot 2 more with fully out and still ejected at the same as 1st 4. opened up the upper and checked the buffer.........i had a 9.5oz rifle buffer that caused this. i'll either install a standard weight rifle buffer and/or take another lower and use carbine between 3.5-4.5oz. brass looked good and ammo used was factory norma 143 golden target match which was great, cause the mag (larue) accepted the length @ 2.860". norma must've made them for short action lengths. no other factory 6.5PRC ammo to compare with as some could be for xm length mags?
Closing/choking it off (ie, reducing flow/pressure) it will short stroke.You need less gas to bring the ejection pattern around to 3-4. not more. 1-2 is over gas or undermass.
I apologize, missed the PRC part whoops.Closing/choking it off (ie, reducing flow/pressure) it will short stroke.
Build specsI apologize, missed the PRC part whoops.
Have you posted build specifics for this in another thread?
What I said is generally correct, but 6.5 PRC is a bigger case. Tuning per ejection pattern with the PRC could be misleading.
The only scenarios I’ve seen that fit your description:
1. Gas port on the small side = unresponsive gas adjustment.
2. Gas tube short not enough engagement in gas key.
3. Short dwell timing i.e. long gas system combined with shortish barrel. For #3 I’d agree, reducing buffer/carrier mass is what I would try.
I would check gas tube engagement for sure. Should land about middle of the cam pin cut out in upper.Build specs
McGowen 8t 22" hbar +2 gas (gas port appx .100"
KAK magnum upper
Aero lower
KAK magnum bcg
Odin adjustable block
Rifle length buffer/tune w/KAK 9.5oz rifle buffer
Mil-spec buffer spring
Timney 3# trigger
Ultradyne brake
Diamondhead handguard
Athlon 1-10x28 Helos BTR Gen2
Burris QD optic mount
L) 7/08rem
R) 6.5PRC
straightjacket and rainier........WOWI would check gas tube engagement for sure. Should land about middle of the cam pin cut out in upper.
Not all +2" gas tubes are the same.
Both barrels below are RL + 2" & yet tubes are not the same.
View attachment 8481738
i have that same barrel and it shoots great. what recoil parts (and weights) are you using?PSA receivers
Criterion 22" 6.5 CM
Magpul PRS Lite
CMC 2.5# trigger
Vortex PST Gen II 5-25x50
Harris Bipod
View attachment 8485053
when shooting i used factory hornady 123sst and amax ammo. shot once then shot a second time, thought i missed so went and checked and found that the 2nd shot was almost exactly in the 1st (just slightly oval). that cbi barrel is a keeper for sure!i have that same barrel and it shoots great. what recoil parts (and weights) are you using?
I am using a KAK Industry BCG and the standard PSA buffer but I have an adjustable gas block up front that I tuned to give just enough gas to hold open on an empty mag. Muzzle Brake is an AR-Stoner. I was using Hornady 130gr ELD Match the picture is with RL15 and I have a batch with Varget I need to test as well.when shooting i used factory hornady 123sst and amax ammo. shot once then shot a second time, thought i missed so went and checked and found that the 2nd shot was almost exactly in the 1st (just slightly oval). that cbi barrel is a keeper for sure!
Also, one thing I wound up doing was putting some shims between the barrel and the upper receiver to get the feed ramps a little closer. Used an Aero Precision Barrel Shim Kit LR-308; they managed to go behind the index pin without me having to cut them like I have seen in some videos.i have that same barrel and it shoots great. what recoil parts (and weights) are you using?
so far only factory ammo in all of my ar 6.5creeds. in the ar 260rem i shoot the 130edl-m match ammo as there wasn't any 123's at the time.I am using a KAK Industry BCG and the standard PSA buffer but I have an adjustable gas block up front that I tuned to give just enough gas to hold open on an empty mag. Muzzle Brake is an AR-Stoner. I was using Hornady 130gr ELD Match the picture is with RL15 and I have a batch with Varget I need to test as well.