Hopefully in the next couple of weeks!When can we expect a video?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Post any issues in the thread below or reach out directly to support!
View thread Contact supportHopefully in the next couple of weeks!When can we expect a video?
Any plans on making partial (3"-4") sections avaliable? I'd like to clip into a tripod but also be able to keep my foregrip comfortable.Working on prototyping some ARCA adapters for the MWS, not that I have the small frame ones done.
![]()
Seekins recently released these “side ways” Arca rails. Believe it or not it’s totally manageable in a RRS bh50 or Anvil. Very impressed. Don’t believe they are on their website yet. Give them a call.Any plans on making partial (3"-4") sections avaliable? I'd like to clip into a tripod but also be able to keep my foregrip comfortable.
Shot a gas gun match with this recently. Unfortunately had very consistent first-round feeding issues with KAC magazines.
View attachment 8460655
That sounds similar to my experience. My best guess is the chamber getting dirty subs causing sticky extraction. Xh buffer seemed to extend the time until failure and brushing the chamber would prevent it or clear it up.Went out and shot the lm8 13.5ss with sandman s. Fired around 150 rounds all suppressed no issues gun is factory. Got down to the last 2 mags and stovepipes every other round. 2 different mags and different ammo. Interesting that it ran for that long before that issue. Great accuracy though. Really likes the 130gr Speer
I haven’t run my MWS yet. But I like Slip 2000 for my ARs in generalJust ordered some Lucas gun oil for mine.
What lube does everyone use?
I had ran slip 2000 for years till my 3gun buddy who shoots way more than me turned me on to Lucas. But i was curious about the large frame cause of all the extra fowlingI haven’t run my MWS yet. But I like Slip 2000 for my ARs in general
My father in law got me a test pack of the Lucas. I’ll have to give it a go. They were handing it out at a meeting for off road racingI had ran slip 2000 for years till my 3gun buddy who shoots way more than me turned me on to Lucas. But i was curious about the large frame cause of all the extra fowling
It’s thick AF seems to last quite a while. That’s what i used thus far but im only 60rds inMy father in law got me a test pack of the Lucas. I’ll have to give it a go. They were handing it out at a meeting for off road racing
I haven't run it with PMags at all yet, I'm going to play around with lubricants and see if that resolves my magazine feeding issues before I test PMags.How’s it run with Pmags?
Just ordered some Lucas gun oil for mine.
What lube does everyone use?
I haven't run it with PMags at all yet, I'm going to play around with lubricants and see if that resolves my magazine feeding issues before I test PMags.
I ran Lucas in the gun before/during the match I shot, and on a few other rifles, and I noticed that very dirty/high pressure (suppressed) guns don't seem to like the Lucas (at least in my findings). It dries pretty quickly, or is reduced to a thick sticky sludge with all of the carbon and heat. I'm going to use some LSA (grease based, for high temperature/machine guns) next time I run a bunch of rounds through it in a day.
Interesting that’s all I’ve shot suppressed. I noticed Cody curry on his channel uses some red looking grease is that it?
Not sure if it's the same. We use this for our MGs (stock photo):
View attachment 8464298
suppressed?I’ve found mine functions with very little lube. Cleaned it with break free and wiped it off. Runs without flaw. YMMV
Same. Sprinco red and a brt 50/50 tube now has mine kicking cases out at 2:30-3:00 with fgmm 168's and solid 2:30 territory with hornady black 168 amax.Yes even suppressed. It’s over gassed anyway. I run a SC Omega with ASR mount.
Any plans on making partial (3"-4") sections avaliable? I'd like to clip into a tripod but also be able to keep my foregrip comfortable.
That sounds like undergassed. I’m not familiar with what barrel and spring you have. Gas leak, small port(unlikely if LMT barrel), misaligned gb, spring too stiff, etc.
Is this the barrel that you had chopped? If so, it may be a dwell issue (too short) while running unsuppressed. You may have to compensate by opening up the gas port to run unsuppressed, but this can lead to cascading problems when running a high back pressure suppressor, particularly if the Seekins AGB lever does not have enough throw to restrict gas flow enough while suppressed. Measuring the distance from the gas port (or the gas journal shoulder) to the muzzle, and the gas port diameter if possible, would help.So i never got my LMT cycling without the can with the Seekins select adjustable. Even opened it up to the point the detent came out and i had to slightly put it back in. Do y’all think it’s the H3 buffer or just the so much back pressure exhibited from the surefire that the select agb isn’t able to accommodate the range?
With the can it’s ejecting at 4 o’clock. Plan to move to a PSR7 which should have less back pressure.
Yup it is. I mean if I’m being honest I’ll rarely if ever run it unsuppressed. Much like my mk12. Was just hopeful i could have it run with both on the switch of a lever.Is this the barrel that you had chopped? If so, it may be a dwell issue (too short) while running unsuppressed. You may have to compensate by opening up the gas port to run unsuppressed, but this can lead to cascading problems when running a high back pressure suppressor, particularly if the Seekins AGB lever does not have enough throw to restrict gas flow enough while suppressed. Measuring the distance from the gas port (or the gas journal shoulder) to the muzzle, and the gas port diameter if possible, would help.
So, how far from the muzzle to the gas port ?Yup it is. I mean if I’m being honest I’ll rarely if ever run it unsuppressed. Much like my mk12. Was just hopeful i could have it run with both on the switch of a lever.
What kind of piston gun ?Can I get some suppressor recommendations for a 16” 308 Piston rifle I have inbound? Are these gassed properly out of the box? Wondering if a flow thru can or a higher back pressure can is the way to go on this one? Currently, the only thing I have that I can use out the gate is my Magnus SR. But I’d like to get a dedicated can for this rifle.
I have considered a Hux Flow 7.62 Ti, a Magnus S SR or Dominus SR, Surefire 7.62 RC2, and maybe a KAC QDC CRS PRG.
Should I be worried about using Titanium for this or any other hard use gasser? Someone told me the over day that Ti cans and high heat don’t mix…. Is that a real concern?
Flow through cans seem to be the best for AR’s overallOkay, so long story short, I bought an LMT MWS quad rail in 2017. Sold it a year later to help fund my wife’s engagement ring. (I don’t regret that decision, I got her the ring of her dreams and she is the kind of wife every man dreams of. She asks for very little and I’m glad she got the ring she wanted.)
Anyway, life got busy, work got crazy, kids, all the stuff. I have been out of the shooting world pretty well since about 2020. I have off and on always said I wanted another large frame AR, with the LMT being the top of my want list.
With current political stuff I decided if I was ever gonna get one, I better do it now. So I ordered a MARS-H 16” 308 from Titan Defense and am excited to get an LMT back in my hands.
So my question is, I’m wanting to set it up as a DMR rifle, as I already have a nice long range bolt gun. A DMR type setup, capable of 300-500ish yards would be perfect for coyotes in the fall while farming.
Since I have been out so long, my head is spinning as to what my best options are for scopes and suppressors.
For optics I’m looking at scopes in the 3-18ish power range. Two stand outs to me seem to be the Leupold MK4 or Eotech Vudu.
Suppressors is where I really get lost. I am kind of looking at the Q Thunder Chicken or Trash Panda, but I don’t really have a solid reason why other than one YouTube video I watched that was the can he had on his LMT. I’m wanting something that I can also put on my 5.56 ARs as well, so preferably not overly long or bulky. Just something to make it a reasonable amount quieter, and hopefully not make me eat too much gas.
When I first got into long range shooting at 17 years old, this site helped me out a lot. Now many years later I am once again feeling like a beginner asking for suggestions. So fire away!